Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

Bruchmechanische Untersuchung des Risswachstums für die Massivumformung

Trattnig, G., Sommitsch, C. & Pippan, R., 17 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bruchmechanische Untersuchung des Risswachstums für die Massivumformung

Trattnig, G., Sommitsch, C. & Pippan, R., 2004, Fortschritte der Bruch- und Schädigungsmechanik - Bruchmechanik in der Verkehrstechnik. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Calculation of the intermetallic layer thickness in cold metal transfer welding of aluminum to steel

Silvayeh, Z., Götzinger, B., Karner, W., Hartmann, M. & Sommitsch, C., 22 Dec 2018, In : Materials. 12, 1, 35.

Research output: Contribution to journalArticleResearchpeer-review

Steel
Aluminum
Intermetallics
Welding
Metals

Cavitation studies in materials: New insights from modern techniques in 2D/3D/4D characterisation

Gupta, C., Toda, H., Mayr, P. & Sommitsch, C., 1 Mar 2015, In : Materials Science and Technology (United Kingdom). 31, 5, p. 513-515 3 p.

Research output: Contribution to journalEditorialResearchpeer-review

Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets

Schuster, P. A., Österreicher, J. A., Kirov, G., Sommitsch, C., Kessler, O. & Mukeli, E., 1 Mar 2019, In : Metals. 9, 3, 305.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Aluminum sheet
Stamping
Aging of materials
Compression testing
Crashworthiness

Characterisation and quantification of cavities in 9Cr martensitic steel for power plants

Yadav, S. D., Sonderegger, B., Sartory, B., Sommitsch, C. & Poletti, M. C., 2015, In : Materials science and technology. 31, 5, p. 554-564

Research output: Contribution to journalArticleResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, T., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 579-580 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sommitsch, C., Ebner, T., Sherstnev, P. & Hacksteiner, M., 2008.

Research output: Contribution to conferencePosterResearch

Characterization of localized corrosion of heat treated Er- and Zr-containing A356 alloys in 3.5 wt% NaCl aqueous solution

Colombo, M., Buzolin, R. H., Gariboldi, E., Vallant, R. & Sommitsch, C., 7 Jun 2018, In : Materials and corrosion. p. 1-13

Research output: Contribution to journalArticleResearchpeer-review

Corrosion
Intermetallics
Corrosion resistance
Potentiodynamic polarization
Electrochemical impedance spectroscopy

Characterization of δ-phase in superalloy Allvac 718PlusTM

Stotter, C., Sommitsch, C., Wagner, J., Harald, L., Letofsky-Papst, I., Werner, P., Stockinger, M. & Zickler, G. A., 2008, In : International journal of materials research = Zeitschrift für Metallkunde. 4, 99, p. 376-380

Research output: Contribution to journalArticleResearchpeer-review

Charakterisierung der Ni-Basis-Superlegierung Alloy 718 Plus

Stotter, C., Sommitsch, C. & Buchmayr, B., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparative Investigation of Phase Transformation Behavior as a Function of Annealing Temperature and Cooling Rate of Two Medium-Mn Steels

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : Steel research international. 85, p. 1-8

Research output: Contribution to journalArticleResearchpeer-review

Comparison between microstructure evolution in IN718 and ATI Allvac® 718PlusTM - Simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2011, In : Advanced Materials Research. 278, p. 168-173

Research output: Contribution to journalArticleResearchpeer-review

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2010, Proceedings EuroSuperalloys 2010 - European Symposium on Superalloys and their Application. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 25 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for modelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 2010, MMM2010. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM Conference on Material Forming. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 575-588

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Co-ordination of European Research in Structural Materials for Power Generation Equipment

Sommitsch, C., Vanstone, R., Kern, T-U., Barnard, P., Mayr, P., Thomson, R. & Agüero, A., 2014, Liège Conference on Materials for Advanced Power Engineering. ., Vol. Band / Volume 234. p. 3-18 (Schriften des Forschungszentrums Jülich, Reihe Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Co-ordination of European Research in Structural Materials for Power Generation Equipment

Sommitsch, C., Vanstone, R., Kern, T-U., Bernard, P., Mayr, P., Thomson, R. & Agüero, A., 14 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Corrigendum to "Microstructure development in hot deformed AA6082" [Mater. Sci. Eng. A 528 (2011) 2423-2430]

Poletti, M. C., Rodriguez-Hortalá, M., Hauser, M. & Sommitsch, C., 1 Mar 2013, In : Materials science and engineering / A. 564, p. 288 1 p.

Research output: Contribution to journalArticleResearchpeer-review

CORROSION AND MECHANICAL PROPERTIES OF WELDED ALUMINIUM AND MAGNESIUM ALLOYS FOR REFRIGERATION COMPRESSORS IN COMPARISON WITH DEEP-DRAWING STEEL

Kerschbaumer, K. G., Vallant, R., Enzinger, N. & Sommitsch, C., 2012, 20th JUBILEE CONFERENCE ON MATERIALS AND TECHNOLOGY. ., p. 129-129

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CORROSION RESISTANCE OF LINEAR FRICTION WELDED CHAIN LINKS

Gsellmann, B., Huemer, W., Vallant, R. & Sommitsch, C., 2015.

Research output: Contribution to conferencePaperResearch

Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

Sommitsch, C. & Buchmayr, B., 2007, In : Steel research international. 78, 10/11, p. 740-744

Research output: Contribution to journalArticleResearchpeer-review

CRACK BEHAVIOUR OF THE NICKEL BASED ALLOY 80A DURING HOT FOMRING

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

Research output: Contribution to conferencePosterResearch

Crack behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007, Modern developments and applications in Microbeam Analysis. ., p. 287-287

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 2004, Proceedings of the 15th European Conference on Fracture. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 11 Aug 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Cracks on the Roots of Turbine Blades of the Low-Pressure Turbine in a Steam Power Plant

Plesiutschnig, E., Vallant, R., Stöfan, G., Sommitsch, C., Mayr, M., Marn, A. & Heitmeir, F., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 214-225

Research output: Contribution to journalArticleResearchpeer-review

Creep and damage investigation of advanced martensitic chromium steel weldments for high temperature applications in thermal power plants

Schlacher, C., Beal, C., Sommitsch, C., Mitsche, S. & Mayr, P., 2015, In : Science and technology of welding and joining. 20, 1, p. 82-90

Research output: Contribution to journalArticleResearchpeer-review

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2013, 9th International Conference on Trends in Welding Research. ., p. 376-381

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Uesugi, K., Suzuki, Y. & Sommitsch, C., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

CREEP AND DAMAGE INVESTIGATIONS OF ADVANCED MARTENSITIC CHROMIUM STEEL WELDMENTS FOR HIGH TEMPERATURE APPLICATION IN THERMAL POWER PLANTS

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 2014, (Accepted/In press) Creep & Fracture in High Temperature Components Design & Life Assessment. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep and damage investigations of MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 2015, (Accepted/In press) Advanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep and Fatigue Damage in Hot Work Tools Steels during Copper and Aluminium Extrusion

Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Redl, C., 2008, In : Key engineering materials. 367, p. 169-176

Research output: Contribution to journalArticleResearchpeer-review

Creep damage investigation of advanced martensitic 9Cr steel weldments for high temperature applications

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 7 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep fatigue in extrusion dies - modelling and simulation

Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In : Steel grips. 4, 1, p. 51-55

Research output: Contribution to journalArticleResearch

Creep fatigue in hot work tool steels during copper extrusion

Krumphals, F., Wlanis, T., Sommitsch, C., Buchner, B., Huber, D., Redl, C. & Wieser, V., 2008, International Conference on Low Cycle Fatigue. Berlin: Dt. Verband für Materialforschung und -prüfung, p. 721-726

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

Research output: Contribution to conferencePosterResearch

Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 14 Jan 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep properties and evolution of damage in advanced creep resistant martensitic steels

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep strength and microstructural evolution of 9-12% Cr hear resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010.

Research output: Contribution to conferencePosterResearch

Creep strength and microstructural evolution of 9-12% Cr heat resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010, 9th Liege Conference on Materials for Advance Power Engineering. ., p. 261-271

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Current developments of tooling technology in the area of hot stamping

Boskovic, V. & Sommitsch, C., 22 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch