Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

Filter
Article
2019

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Boron
Dimensional stability
Silicon nitride
Mechanical properties
Eutectics

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Preheating
Residual stresses
Melting
Hatches
Lasers

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., Mar 2019, In : Metals. 9, 3, 353.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steel
Manganese
Plasticity
Quenching
Hardness

Preparation Method of Spherical and Monocrystalline Aluminum Powder

Skalon, M., Hebda, M., Buzolin, R., Pottlacher, G., Mitsche, S. & Sommitsch, C., 23 Mar 2019, In : Metals. 9, 3, 9 p., 375.

Research output: Contribution to journalArticleResearchpeer-review

2018

Calculation of the intermetallic layer thickness in cold metal transfer welding of aluminum to steel

Silvayeh, Z., Götzinger, B., Karner, W., Hartmann, M. & Sommitsch, C., 22 Dec 2018, In : Materials. 12, 1, 35.

Research output: Contribution to journalArticleResearchpeer-review

Steel
Aluminum
Intermetallics
Welding
Metals

Characterization of localized corrosion of heat treated Er- and Zr-containing A356 alloys in 3.5 wt% NaCl aqueous solution

Colombo, M., Buzolin, R. H., Gariboldi, E., Vallant, R. & Sommitsch, C., 7 Jun 2018, In : Materials and corrosion. p. 1-13

Research output: Contribution to journalArticleResearchpeer-review

Corrosion
Intermetallics
Corrosion resistance
Potentiodynamic polarization
Electrochemical impedance spectroscopy

Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels

Schneider, R., Steineder, K., Krizan, D. & Sommitsch, C., 30 Nov 2018, In : Materials Science and Technology (United Kingdom).

Research output: Contribution to journalArticleResearchpeer-review

Steel
heat treatment
Heat treatment
steels
mechanical properties

Induktionsschweißen von carbonfaserverstärktem Polyamid 66 im automobilen Karosseriebau

Forstner, T., Sommitsch, C. & Fischer, F., 28 Jun 2018, In : Zeitschrift Kunststofftechnik. 14, 4, p. 233-278

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence of microstructural parameters of indefinite chill alloys on flexural strength and Young's modulus

Paar, A., Schneider, R. & Sommitsch, C., 2018, In : Materials Testing. 60, 3, p. 239-244

Research output: Contribution to journalArticleResearchpeer-review

Graphite
Bending strength
Elastic moduli
Carbides
Strip mills

Influence of Thermal History on the Hot Ductility of a Continuously Cast Low Alloyed Cr-Mo Steel

Hoflehner, C., Sommitsch, C., Beal, C., Six, J. & Ilie, S., 29 Aug 2018, In : Journal of Materials Engineering and Performance. 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steel
Ductility
Solidification
Straightening
Continuous casting

On the Damage Behavior of a 0.1C6Mn Medium-Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2018, In : Steel research international. 89, 9, 1700378.

Research output: Contribution to journalArticleResearchpeer-review

2017

Application of thermo-calc TCFE7 to high-alloyed mottled cast iron

Paar, A., Elizondo, L., Brandner, M., Trickl, T., Sonderegger, B., Beal, C. & Sommitsch, C., 2017, In : Materials Science Forum. 879, p. 1431-1436 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Cast iron
casts
Thermodynamics
iron
thermodynamics

Enhancing mechanical properties of wires by a novel continuous severe plastic deformation method

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2017, In : International journal of materials research = Zeitschrift für Metallkunde. 108, 9, p. 741-749 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
plastic deformation
Plastic deformation
wire
Wire
mechanical properties

Innovative surface modification of Ti6Al4V alloy by electron beam technique for biomedical application

Ramskogler, C., Warchomicka, F. G., Mostofi, S., Weinberg, A. & Sommitsch, C., 11 Apr 2017, In : Materials science and engineering / C. 78, p. 105 - 113

Research output: Contribution to journalArticleResearchpeer-review

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 29 Jul 2017, In : Acta materialia. 139 (2017), p. 39 - 50 139 (2017).

Research output: Contribution to journalArticleResearchpeer-review

The Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2017, In : Materials Science Forum. 879, p. 1847-1852

Research output: Contribution to journalArticleResearchpeer-review

2016

Applicability of PEEK and its composites in total ankle replacement devices and wear rate predictions

Kerschhofer, D., Gundapaneni, D., Sommitsch, C. & Goswami, T., 7 Dec 2016, In : Biomedial Physics & Engineering Express. Biomed. Phys. Eng. Express 2(2016)065012, doi: 10.1088/2057-1976/2/6/065012.

Research output: Contribution to journalArticleResearchpeer-review

Ankle Replacement Arthroplasty
Equipment and Supplies
Finite Element Analysis
Osteolysis
Weight-Bearing

Electron beam welding of thick-walled copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 13 Jul 2016, In : Science and technology of welding and joining. 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Evaluation and optimization of the bonding behavior between substrate and coating processed by laser cladding

Vollmer, R. & Sommitsch, C., 2016, In : Physics procedia .

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Laser cladding
coatings
Coatings
optimization
evaluation

Evolution of the substructure of a novel 12% Cr steel under creep conditions

Yadav, S. D., Kalácska, S., Dománková, M., Yubero, D. C., Resel, R., Groma, I., Beal, C., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 1 May 2016, In : Materials characterization. 115, p. 23-31 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel
substructures
Electron diffraction
Creep
steels

Ferritic phase transformation to improve creep properties of martensitic high Cr steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Paul, S. & Zeiler, G., 2016, In : Scripta materialia. 122, p. 98-101

Research output: Contribution to journalArticleResearchpeer-review

creep properties
Steel
austenite
Austenite
phase transformations

Fracture analysis of a low pressure steam turbine blade

Plesiutschnig, E., Fritzl, P. J., Enzinger, N. & Sommitsch, C., 2016, In : Case Studies in Engineering Failure Analysis. 5-6, p. 39-50 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steam turbines
Turbomachine blades
Crack propagation
Natural frequencies
Corrosion

Modeling surface rolling contact fatigue crack initiation taking severe plastic shear deformation into account

Trummer, G., Marte, C., Dietmaier, P., Sommitsch, C. & Six, K., 17 Feb 2016, In : Wear. 352-353, p. 136 - 145

Research output: Contribution to journalArticleResearchpeer-review

Multichannel diffusion vs TDS model on example of energy spectra of bound hydrogen in 34CrNiMo6 steel after a typical heat treatment

Belyaev, A. K., Polyanskiy, A. M., Polyanskiy, V. A., Sommitsch, C. & Yakovlev, Y. A., 2016, In : International Journal of Hydrogen Energy. 41 , 20, p. 8627-8634

Research output: Contribution to journalArticleResearchpeer-review

Retardation of fatigue crack growth in high strength steel S690 using a modified stop-hole technique

Razavi, S. M. J., Ayatollahi, M. R., Sommitsch, C. & Moser, C., 23 Nov 2016, In : Engineering fracture mechanics. 169, 0013-7944, p. 226 - 237

Research output: Contribution to journalArticleResearchpeer-review

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 19 Dec 2016, In : IOP Conference Series / Materials Science and Engineering. 159, 2001, p. 1-8 8 p.

Research output: Contribution to journalArticleResearchpeer-review

2015

3D creep cavitation characteristics and residual life assessment in high temperature steels: a critical review

Gupta, C., Toda, H., Mayr, P. & Sommitsch, C., 2015, In : Materials science and technology. 31, 5, p. 603-626

Research output: Contribution to journalArticleResearchpeer-review

Agile multiscale modelling of the thermo-mechanical processing of an aluminium alloy

MACIOŁ, P., Bureau, R., Poletti, M. C., Sommitsch, C., WARCZOK, P. & Kozeschnik, E., 2015, In : Key engineering materials. 651-653, p. 1319-1324

Research output: Contribution to journalArticleResearchpeer-review

Characterisation and quantification of cavities in 9Cr martensitic steel for power plants

Yadav, S. D., Sonderegger, B., Sartory, B., Sommitsch, C. & Poletti, M. C., 2015, In : Materials science and technology. 31, 5, p. 554-564

Research output: Contribution to journalArticleResearchpeer-review

Comparative Investigation of Phase Transformation Behavior as a Function of Annealing Temperature and Cooling Rate of Two Medium-Mn Steels

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : Steel research international. 85, p. 1-8

Research output: Contribution to journalArticleResearchpeer-review

Cracks on the Roots of Turbine Blades of the Low-Pressure Turbine in a Steam Power Plant

Plesiutschnig, E., Vallant, R., Stöfan, G., Sommitsch, C., Mayr, M., Marn, A. & Heitmeir, F., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 214-225

Research output: Contribution to journalArticleResearchpeer-review

Effect of Pass Number, Rotational and Traverse Speed on Particle Distribution and Microstructure of AZ31/SiC Composite Produced by Friction Stir Processing

Jabbari, A. H., Sedighi, M., Vallant, R., Hütter, A. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 765-770

Research output: Contribution to journalArticleResearchpeer-review

Hot deformation behavior of a 3rd generation advanced high strength steel with a Medium-Mn content

Steineder, K., Dikovits, M., Beal, C., Sommitsch, C., Krizan, D. & Schneider, R., 2015, In : Key engineering materials. 651-653, p. 120-125

Research output: Contribution to journalArticleResearchpeer-review

Hybrid processing of AZ91 Magnesium alloy/nano-Al2O3 composites

Yadav, S. D., Bhingole, P. P., Chaudhari, G. P., Nath, S. K. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 783-788

Research output: Contribution to journalArticleResearchpeer-review

Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography and EBSD

Schlacher, C., Pelzmann, T., Beal, C., Sommitsch, C., Gupta, C., Toda, H. & Mayr, P., 2015, In : Materials science and technology. 31, 5, p. 516-521

Research output: Contribution to journalArticleResearchpeer-review

Investigation on the microstructural evolution in a Medium-Mn steel (X10Mn5) after intercritical annealing

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : HTM - journal of heat treatment and materials. 70, 1, p. 19-25

Research output: Contribution to journalArticleResearch

Microstructure Evolution and Hardness Distribution in Al Wires Subjected to Simultaneous Tension-Torsion Deformation

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 771-776

Research output: Contribution to journalArticleResearchpeer-review

Numerical Simulation of Material Flow in AA6082 During Friction Stir Spot Welding

Gao, Z., Wang, P., Cheng, D., Niu, J. & Sommitsch, C., 2015, In : Engineering Review. Vol. 35, Issue 3, p. 283-289

Research output: Contribution to journalArticleResearchpeer-review

File
Spot welding
Friction
Computer simulation
Strain rate
Compaction

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 2015, In : Materials at high temperatures. 32, 3;32.03, p. 318-322

Research output: Contribution to journalArticleResearchpeer-review

Surface Modification of pure magnesium and magnesium alloy by Friction Stir Processing

Hütter, A., Huemer, W., Ramskogler, C., Warchomicka, F. G., Lachehab, A., Vallant, R. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 796-801

Research output: Contribution to journalArticleResearchpeer-review

2014

Advanced Microstructures for Increased Creep Rupture Strength of MARBN Steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G., Mitsche, S. & Sommitsch, C., 2014, In : Materials Science Forum. 783-786, p. 1867-1871

Research output: Contribution to journalArticleResearchpeer-review

An object-oriented analysis of complex numerical models

MACIOŁ, P., Bureau, R. & Sommitsch, C., 2014, In : Key engineering materials. 611-612, p. 1356-1363

Research output: Contribution to journalArticleResearchpeer-review

Automated measurement of near-surface plastic shear strain

Trummer, G., Six, K., Marte, C., Meierhofer, A. & Sommitsch, C., 2014, In : International railway journal. 3, 3, p. 1-16

Research output: Contribution to journalArticleResearch

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014, In : Berg- und hüttenmännische Monatshefte. 159, 7, p. 294-295

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Dissimilar Electron Beam Welding of Nickel Base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 2014, In : Procedia engineering . 86, p. 184-194

Research output: Contribution to journalArticleResearchpeer-review

Failure modes for total ankle arthroplasty: a statistical analysis of the Norwegian Arthroplasty Register

Sadoghi, P., Roush, G., Kastner, N., Leithner, A., Sommitsch, C. & Goswami, T., 2014, In : Archives of Orthopaedic and Trauma Surgery. 134, p. 1361-1368

Research output: Contribution to journalArticleResearchpeer-review