Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2019

Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2019, European Conference on Heat Treatment ECHT 2019.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design of a roll test bench for investigating thermo-mechanical tool wear

Domitner, J., Stern, T., Leitner, A. T., Aigner, M., Paar, A., Trickl, T., Elizondo, L. & Sommitsch, C., 2019, Proceedings of the TOOLING 2019 Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fracture behavior of welded T-joints of aluminum alloy EN AW-6063

Silvayeh, Z., Domitner, J., Grünbart, F., Götzinger, B. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

HOT DUCTILITY BEHAVIOR OF A CONTINUOUSLY CAST Ti-Nb MICROALLOYED STEEL

Hoflehner, C., Beal, C., Sommitsch, C., Six, J. & Ilie, S., 15 Nov 2019, METAL 2019: 28th International Conference on Metallurgy and Materials ; proceedings. Ostrava: TANGER Ltd., Ostrava, p. 84 - 89 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of the fibre type influence on the energy desnity of the induction heating process through a semi-analytic method

Forstner, T., Sommitsch, C. & Fischer, F., 2019, Procedia Manufacturing 37 : Science Direct, Elsevier. p. 286-293 37

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructurally Based Modelling of Creep Deformation of Martensitic Steels

Sonderegger, B., Krenmayr, B., Riedlsperger, F. K., Fercher, B., Niederl, B. & Sommitsch, C., Oct 2019, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials 2019: Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials. ASM International, p. 360-369 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling single-side inflating of flow channels in roll-bonded aluminum panels

Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermo-mechanical Fatigue Behaviour of AlSi7Mg Alloy Processed by Selective Laser Melting

Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M., Sommitsch, C. & Vedani, M., Oct 2019, (Submitted) Euro PM2019 - Congress and Exhibition. European Powder Metallurgy Association

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
2018

Influence of the E-coating process on the mechanical properties of aluminum welds

Silvayeh, Z., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Influence of thermal history on the hot ductility of Ti-Nb a microalloyed steels

Hoflehner, C., Sommitsch, C., Ramskogler, C., Six, J. & Ilie, S., 13 Jun 2018, 7th International Congress on Science and Technology of Steelmaking.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerical study on destructive testing of self-piercing rivet joints

Domitner, J., Woltsche, C., Hönsch, F. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Untersuchung der mechanischen Materialeigenschaften in der Wärmeeinflusszone geschweißter EN AW-6063-Bleche

Silvayeh, Z., Götzinger, B., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Tagungsband der 10. Ranshofener Leichtmetalltage: Hochleistungsmetalle und Prozesse für den Leichtbau der Zukunft. Kraly, A., Chimani, C. & Uggowitzer, P. (eds.). p. 198-209

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

Biocompatible ceramic-biopolymer coatings obtained by electrophoretic deposition on electron beam structured titanium alloy surfaces

Ramskogler, C., Cordero, L., Warchomicka, F., Boccaccini, A. R. & Sommitsch, C., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications Ltd., p. 1552-1557 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of high creep resistant MARBN steels for forged components in high efficient power plants

Plesiutschnig, E., Zeiler, G., Sommitsch, C. & Beal, C., 2017, Proceedings - 20th International Forgemasters Meeting - IFM 2017. p. 115-123

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique

Ayatollahi, M. R., Razavi, S. M. J., Sommitsch, C. & Moser, C., 2017, Materials Science Forum. Switzerland: Trans Tech Publications Ltd., Vol. 879. p. 3-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Pitting corrosion behaviour of stainless steel AISI 304 with different tinting colours

Godavarthy Anantha Venkata, R. K. P., Gsellmann, B., Vallant, R. & Sommitsch, C., 25 May 2017, ESSC & DUPLEX 2017: 9th European Stainless Steel Conference - Science & Market / 5th European Duplex Stainless Steel Conference & Exhibition. Bergamo, p. 1-9 9 p. 026

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Reducing tool wear by partial cladding of critical zones in hot form tool by laser metal deposition

Vollmer, R. & Sommitsch, C., 16 Oct 2017, AIP Conference Proceeedings 1896.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
2016

Additive Manufacturing via Cold Metal Transfer

Stockinger, J., Wiednig, C. A., Enzinger, N., Sommitsch, C., Huber, D. & Stockinger, M., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial perspective in Additive Technologies. Linz, p. 117-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Effect of Friction Stir Welding on Microstructure and Properties of Micro-TiO_2 doped HSLA Steel

Pouriamanesh, R., Dehghani, K., Hütter, A., Vallant, R., Enzinger, N. & Sommitsch, C., 2016, 41th CWS International conference Welding 2016. Opatija, p. 46-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Electron beam process for the production of model alloys

Sommitsch, C., Wiednig, C. A., Spenger, T., Enzinger, N., Hofer, F. & Simic, S., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Experimental investigations on single-sided CMT welding of hybrid aluminum-steel blanks

Silvayeh, Z., Vallant, R., Sommitsch, C., Götzinger, B. & Karner, W., 2016, Proceedings of the 10th International Conference on Trends in Welding Research. p. 32 - 35

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

From ICDP to (graphitized) HSS: Sophisiticated work roll grades for highest demands in rolling mills for flat products

Armin, P., Brandner, M., Trickl, T., Elizondo, L., Beal, C. & Sommitsch, C., 2016, 10th International Rolling Conference and the 7th European Rolling Conference . Buchmayr, B. (ed.). ASMET, Austrian Society for Metallurgy and Materials

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Influence of Thermal History on the Hot Ductility of Ti-Nb Microalloyed Steels

Beal, C., Caliskanoglu, O., Sommitsch, C., Ilie, S., Six, J. & Dománková, M., 2016, Materials Science Forum. Trans Tech Publications Ltd., Vol. 879. p. 199 - 204

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Processing and Material Properties of Hot Work Tool Steels Manufactured by Selective Laser Melting.

Giedenbacher, J., Huskic, A., Wallner, S. & Sommitsch, C., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial Perspective in Additive Technologies. Linz, 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 2016, IOP Conf. Series: Materials Science and Engineering 159 (2016) 012001.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Creep and damage investigations of MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 2015, (Accepted/In press) Advanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effect of Melting on the Hot Ductility of Continuously Cast Steels

Caliskanoglu, O., Zamberger, S., Beal, C. & Sommitsch, C., 2015, The 6th International Congress on the Science and Technology of Steelmaking (ICS2015). Peking: China Machine Press, p. 512-515

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen

Plesiutschnig, E., Sommitsch, C., Zeiler, G. & Paul, S., 2015, 38. Vortragsveranstaltung Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. Düsseldorf: Forschungsvereinigung Warmfeste Stähle und Hochtemperaturwerkstoffe, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Improvement of the corrosion behaviour of AZ91 via friction stir processing

Huemer, W., Hahn, C., Hütter, A., Valiant, R. & Sommitsch, C., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. Austrian Society for Metallurgy and Materials (ASMET), p. 1156-1165 10 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 2015, International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application

Ramskogler, C., Warchomicka, F. G., Sommitsch, C., Mostofi, S. & Weinberg, A., 2015, Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Automated measurement of near-surface plastic shear strain

Trummer, G., Six, K., Marte, C., Meierhofer, A. & Sommitsch, C., 2014, Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance. Stirlingshire, UK: Civil-Comp Press, p. 1-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014, ASMET Forum für Metallurgie und Werkstofftechnik 2014. Leoben: ., p. 108-114

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Co-ordination of European Research in Structural Materials for Power Generation Equipment

Sommitsch, C., Vanstone, R., Kern, T-U., Barnard, P., Mayr, P., Thomson, R. & Agüero, A., 2014, Liège Conference on Materials for Advanced Power Engineering. ., Vol. Band / Volume 234. p. 3-18 (Schriften des Forschungszentrums Jülich, Reihe Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CREEP AND DAMAGE INVESTIGATIONS OF ADVANCED MARTENSITIC CHROMIUM STEEL WELDMENTS FOR HIGH TEMPERATURE APPLICATION IN THERMAL POWER PLANTS

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 2014, (Accepted/In press) Creep & Fracture in High Temperature Components Design & Life Assessment. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 2014, First International Conference on Structural Integrity.. ., p. 225-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of pre-existing pores in creep loaded 9Cr steel

Yadav, S. D., Rosc, J., Sartory, B., Brunner, R., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 2014, 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science. Hoboken, NJ, USA: John Wiley & Sons, Inc, p. 85-90 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural evolution in 0.1%C5%Mn steel after intercritical annealing depending on temperature and cooling rate

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2014, Proceedings of the European Conference on Heat Treatment and 21st IFHTSE Congress. ., p. 301-308

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural evolution of two low carbon steels with a medium manganese content

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2014, Proceedings of 2nd HMnS Conference. ., p. 351-354

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014, Materials for Advanced Power Engineering 2014. Jülich: ., Vol. 234. p. 180-187 (Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 2014, (Accepted/In press) Electric Power Research Institute (EPRI). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Advanced Materials Research. Trans Tech Publications Ltd., Vol. 783-786. p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Physical based creep strain modelling of 9%Cr martensitic steel

Yadav, S. D., Schuler, M., Sommitsch, C. & Poletti, M. C., 2014, (Accepted/In press) ECCC International Conference on Creep and Fracture in High Temperature Components: Design & Life Assessment Issues. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 2014, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologie als Basis für neue Mobilitätskonzepte. ., p. 164-178

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

STUDY OF CREEP DAMAGE IN CREEP EXPOSED MARTENSITIC HIGH CHROMIUM STEEL WELDMENTS

Schlacher, C., Beal, C., Sommitsch, C., Toda, H. & Mayr, P., 2014, International Conference on Advances in Materials Technology for Fossil Power Plants. ., p. 914-922

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2013, 9th International Conference on Trends in Welding Research. ., p. 376-381

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

RULE-BASED EXPERT SYSTEM APPLICATION TO OPTIMIZING OF MULTISCALE MODEL OF HOT FORGING AND HEAT TREATMENT OF TI-6AL-4V

Maciol, P., Krumphals, A., Jędrusik, S., Macioł, A. & Sommitsch, C., 2013, V Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED 2013). ., p. 1237-1248

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File