Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

1996

Direct observation of the crack tip deformation and the crack closure

Pippan, R., Bichler, C., Sommitsch, C. & Kolednik, O., 1996, Fatigue ´96 – Proceedings of the 6th International Fatigue Congress. Oxford: Pergamon, p. 411-416

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1997

Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen

Sommitsch, C., 1997, In : Schweissen und Schneiden <Düsseldorf, 1949 ->. 8, p. 568-575

Research output: Contribution to journalArticleResearch

1998

Modellierung des Warmwalzens von Nickel-Basis-Legierungen

Sommitsch, C. & Buchmayr, B., 1998, Verformungskundliches Kolloquium. Leoben: VKH, p. NN-NN

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2000

A Precipitation Model for Multi-Component Multi-Phase Systems in Nickel-Base Superalloys

Sommitsch, C., Kozeschnik, E., Wasle, G. & Buchmayr, B., 4 Dec 2000.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Precipitation Model for Multi-Component Multi-Phase Systems in Nickel-Base Superalloys

Sommitsch, C., Kozeschnik, E., Wasle, G. & Buchmayr, B., 2000, International Conference on Processing & Manufacturing of Advanced Materials. Elsevier B.V., p. CD-CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A precipitation model for Multi-phase Systems in Nickel-Base Alloys

Sommitsch, C., Kozeschnik, E., Wasle, G. & Buchmayr, B., 2000, THERMEC'2000. ., Vol. 117. p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling Recrystallization of Nickel-Base Alloys

Sommitsch, C., Mitter, W. & Kleber, S., 2000, Werkstoffwoche. ., p. Internet-Internet

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2001

Microstructural Simulation of Hot Forming Processes

Sommitsch, C. & Wieser, V., 2001, EUUROMAT 2001. ., p. CD-CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Mikrostrukturelle Modellierung der Warmumformung

Buchmayr, B., Auzinger, D., Samoilov, A. & Sommitsch, C., 2001, In : Berg- und hüttenmännische Monatshefte. 146, 9, p. 385-392

Research output: Contribution to journalArticleResearchpeer-review

Simulation der Gefügeentwicklung bei Warmwalzen

Sommitsch, C., Wieser, V., Wurm, C. & Lenger, H., 2001, In : Berg- und hüttenmännische Monatshefte. 146, 1, p. 6-9

Research output: Contribution to journalArticleResearchpeer-review

2002

A dislocation density model for the simulation of hot forming processes

Sommitsch, C., Wieser, V. & Kleber, S., 2002, In : Journal of materials processing technology. 125/126, p. 130-137

Research output: Contribution to journalArticleResearchpeer-review

FEM - gekoppelte Simulation der Mikrostruktur bei Umformprozessen

Wasle, G., Buchmayr, B., Lind, C. & Sommitsch, C., 22 Feb 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FEM - gekoppelte Simulation der Mikrostruktur bei Umformprozessen

Wasle, G., Lind, C., Buchmayr, B. & Sommitsch, C., 2002, Tagungsband zum XXI. Verformungskundlichen Kolloquium. Leoben: VKH Leoben, p. 65-73

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2003

Mikrostrukturelle Simulation der Warmumformung und Wärmebehandlung

Wieser, V., Sommitsch, C. & Schützenhöfer, W., 7 Jul 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling and Investigation of Dynamic Recrystallisation in Nickel-Based Superalloys

Sommitsch, C., Walter, M., Wedl, F. & Kleber, S., 2003, In : Materials Science Forum. 426/432, p. 743-748

Research output: Contribution to journalArticleResearchpeer-review

Modeling and Investigation of Dynamic Recrystallisation in Nickel-Based Superalloys

Sommitsch, C., Walter, M., Wedl, F. & Wieser, V., 7 Jul 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of the Vacuum Arc Remelting with calcosoft-2D

Sommitsch, C., Maronnier, V., Reiter, G., Gäumann, M. & Schützenhöfer, W., 2003, European Conference & Exhibition on Digital Simulation for Virtual Prototyping, Virtual Manufacturing and Virtual Environment. ., p. CD-CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of the Vacuum Arc Remelting with calcosoft-2D

Sommitsch, C., Maronnier, V., Reiter, G., Gäumann, M. & Schützenhöfer, W., 16 Oct 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation of the VAR Process with calcosoft-2D and its Validation

Reiter, G., Maronnier, V., Sommitsch, C., Gäumann, M., Schützenhöfer, W. & Schneider, R., 2003, LMPC 2003 - Proceedings. ., p. 77-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical Simulation of the VAR Process with calcosoft-2D and its Validation

Reiter, G., Maronnier, V., Sommitsch, C., Gäumann, M., Schützenhöfer, W. & Schneider, R., 21 Sep 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physikalische Simulation der mehrstufigen Primärumformung von Alloy 80a

Wasle, G., Sommitsch, C., Kleber, S., Buchmayr, B. & Clemens, H., 2003, In : Berg- und hüttenmännische Monatshefte. 148, p. 293-298

Research output: Contribution to journalArticleResearchpeer-review

Physikalische und numerische Simulation der mehrstufigen Primärumformung

Wasle, G., Buchmayr, B., Sommitsch, C., Clemens, H. & Kleber, S., 19 Apr 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physikalische und numerische Simulation der mehrstufigen Primärumformung (Cogging) einer Nickel-Basis-Superlegierung

Wasle, G., Buchmayr, B., Clemens, H., Sommitsch, C. & Kleber, S., 2003, Werkstofftagung. ., p. 65-78 (Modellbildung und Simulation in der Werkstoff-, Schweiß- und Umformtechnik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantification of the recrystallized fraction in a nickel-base-alloy from EBSD-data

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2003.

Research output: Contribution to conferencePosterResearch

Open Access
File

Quantification of the Recrystallized Fraction in a Nickel-Base-Alloy from EBSD-Data

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2003, In : Microscopy and microanalysis. Suppl. 3, 9, p. 344-345

Research output: Contribution to journalArticleResearchpeer-review

Systematische Bestimmung des rekristallisierten Gefügeanteils einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

Walter, M., Sommitsch, C., Wedl, F. & Kleber, S., 17 Sep 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2004

A fracture mechanics investigation on crack growth in massive forming

Trattnig, G., Sommitsch, C. & Pippan, R., 23 Jun 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An EBSD-study of recrystallisation behaviour of a Nickel base alloy caused by hot compression

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2004.

Research output: Contribution to conferencePosterResearch

An EBSD-study of recrystallisation behaviour of a Nickel base alloy caused by hot compression

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2004, Microscience 2004 / International Conference and Exhibition. ., p. 24-24

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Bruchmechanische Untersuchung des Risswachstums für die Massivumformung

Trattnig, G., Sommitsch, C. & Pippan, R., 2004, Fortschritte der Bruch- und Schädigungsmechanik - Bruchmechanik in der Verkehrstechnik. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Bruchmechanische Untersuchung des Risswachstums für die Massivumformung

Trattnig, G., Sommitsch, C. & Pippan, R., 17 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 2004, Proceedings of the 15th European Conference on Fracture. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 11 Aug 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD-and the recrystallisation of Ni-base alloy

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004.

Research output: Contribution to conferencePosterResearch

EBSD – and the recrystallisation of Ni-base-alloys

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004, Proceedings of the 13th European Microscopy Congress. Liège: Belgian Soc. for Microscopy, p. 695-696

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling of the Vacuum Arc Remelting process at Böhler Edelstahl GmbH

Sommitsch, C., 1 Jan 2004, PAMTalk, p. 12-13.

Research output: Contribution to specialist publicationArticleResearch

Modellierung der Werkstoffschädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 29 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der Werkstoffschädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2004, Verformungskundliches Kolloquium. ., p. 165-176

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

New Developments in the Design and Production of Container Assemblies

Wieser, V., Sommitsch, C., Haberfellner, K. & Lehofer, H., 2004, International Aluminum Extrusion Technology Seminar. ., p. 309-316

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

New Developments in the Design and Production of Container Assemblies

Wieser, V., Sommitsch, C., Haberfellner, K. & Lehofer, H., 18 May 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Stress Relaxation Measurements of Metadynamic and Static Recrystallisation of Alloy 80A

Kleber, S. & Sommitsch, C., 2004, In : Materials Science Forum. 467/470, p. 1237-1242

Research output: Contribution to journalArticleResearchpeer-review

Stress Relaxation Measurements of Metadynamic and Static Recrystallisation of Alloy 80A

Kleber, S., Sommitsch, C. & Wiessner, M., 2004.

Research output: Contribution to conferencePosterResearch

Open Access
File

Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

Walter, M., Sommitsch, C., Wedl, F. & Kleber, S., 2004, In : Sonderbände der praktischen Metallographie. 35, p. 245-250

Research output: Contribution to journalArticleResearch

Open Access
File
2005

A fracture mechanics investigation on crack growth in massive forming

Trattnig, G., Sommitsch, C. & Pippan, R., 2005, In : Materials Science Forum. 482, p. 339-342

Research output: Contribution to journalArticleResearchpeer-review

Blechprüfung

Sommitsch, C. & Buchmayr, B., 2005.

Research output: Contribution to conferencePosterResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 575-588

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of microstructure in forging alloy 718

Harrer, O-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 463-471

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review