Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

2007

Recrystallization behaviour of the nickel-based alloy 80A during hot forming

Mitsche, S., Pölt, P. & Sommitsch, C., 2007, In : Journal of microscopy. 3, 227, p. 267-274

Research output: Contribution to journalArticleResearchpeer-review

Untersuchung des Warmwalzens der Al-Legierung 5083

Sherstnev, P. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2006

Creep fatigue in extrusion dies - modelling and simulation

Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In : Steel grips. 4, 1, p. 51-55

Research output: Contribution to journalArticleResearch

Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

Research output: Contribution to conferencePosterResearch

Damage simulation of extrusion dies of different geometry and material

Wlanis, T., Sommitsch, C., Hatzenbichler, T. & Wieser, V., 25 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Die hoch hinaus wollen

Sommitsch, C., 4 Oct 2006, Wirtschafts-Blatt, p. 10-11.

Research output: Contribution to specialist publicationArticleResearch

Duktile Schädigung und Mikrostrukturentwicklung einer Nickelbasislegierung während der Warmumformung – Experiment und Modellierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Jun 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dynamic recrystallization of Ni-base alloys - Experimental results and comparisons with simulations

Pölt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In : Materials science and engineering / A. 420, p. 306-314

Research output: Contribution to journalArticleResearchpeer-review

EBSD Analysis of the recrystallization behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C. & Pölt, P., 2006, In : Practical metallography = Praktische Metallographie. Sonderheft, 38, p. 43-50

Research output: Contribution to journalArticleResearchpeer-review

EBSD-Untersuchungen des Rekristallisationsverhaltens der Nickelbasislegierung Alloy 80A während der Warmverformung

Mitsche, S., Sommitsch, C. & Pölt, P., 27 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigation and numerical modelling of extrusion tool life time

Sommitsch, C., Redl, C., Wieser, V., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2006, International Tooling Conference. ., p. 589-596

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Investigation and numerical modelling of extrusion tool life time

Redl, C., Wieser, V., Sommitsch, C., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2 May 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigations on fracture of a Ni-base alloy at elevated temperatures by continuum damage mechanics

Rüf, G., Sommitsch, C. & Buchmayr, B., 26 Apr 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Lehrstuhl für Umformtechnik

Buchmayr, B., Harrer, O-K. & Sommitsch, C., 2006, In : Berg- und hüttenmännische Monatshefte. 151, 7, p. 271-275

Research output: Contribution to journalArticleResearchpeer-review

Lifetime evaluation of two different hot work tool steels in aluminium extrusion

Sommitsch, C., Sievert, R., Wlanis, T. & Redl, C., 25 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der duktilen Schädigung einer Nickelbasislegierung unter Berücksichtigung der Werkstoffentfestigung bei der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 4 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der duktilen Schädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

Research output: Contribution to conferencePosterResearch

Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In : Steel grips. 4, 1, p. 56-63

Research output: Contribution to journalArticleResearch

Modelling of creep-fatigue in extrusion dies

Sommitsch, C., Wlanis, T. & Wieser, V., 7 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

Sommitsch, C. & Mitter, W., 2006, In : Acta materialia. 54, 2, p. 357-375

Research output: Contribution to journalArticleResearchpeer-review

On the modelling of the interaction of materials softening and ductile damage during hot working of Alloy 80A

Sommitsch, C., Pölt, P., Mitsche, S. & Rüf, G., 2006, In : Journal of materials processing technology. 177, p. 282-286

Research output: Contribution to journalArticleResearchpeer-review

Quantitative Metallography

Mitsche, S., Sommitsch, C. & Pölt, P., 2006, In : GIT imaging & microscopy. 1, p. 38-39

Research output: Contribution to journalArticleResearch

Radial forging of a nickel base alloy at different temperatures

Harrer, O-K., Wallner, S., Wieser, V. & Sommitsch, C., 2006, In : Steel grips. 4, 5/6, p. 356-360

Research output: Contribution to journalArticleResearch

Recrystallization behaviour of the nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 2006, EBSD 2006, Conference Procedings. ., p. 7-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Recrystallization behaviour of the nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 3 Apr 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation der Gefügeentwicklung beim Stabwalzen von Rippenstahl

Sommitsch, C., Fohringer, H., Jahn, A., Stöckl, C. & Buchmayr, B., 2006, In : Berg- und hüttenmännische Monatshefte. 151, 9, p. 344-349

Research output: Contribution to journalArticleResearchpeer-review

Simulation der Gefügeentwicklung beim Stabwalzen von Rippenstahl

Sommitsch, C., Fohringer, H., Jahn, A., Stöckl, C. & Buchmayr, B., 22 May 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation der Temperatur- und Gefügeentwicklung beim Stabwalzen von BSt 550

Sommitsch, C. & Buchmayr, B., 2006, .

Research output: Book/ReportOther reportResearch

Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

Mitsche, S., Sommitsch, C. & Pölt, P., 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2005

A fracture mechanics investigation on crack growth in massive forming

Trattnig, G., Sommitsch, C. & Pippan, R., 2005, In : Materials Science Forum. 482, p. 339-342

Research output: Contribution to journalArticleResearchpeer-review

Blechprüfung

Sommitsch, C. & Buchmayr, B., 2005.

Research output: Contribution to conferencePosterResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 575-588

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of microstructure in forging alloy 718

Harrer, O-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 463-471

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ductile fracture analysis with damage models of effective stresses at high temperatures

Sommitsch, C. & Rüf, G., 9 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ductile fracture analysis with damage models of effective stresses at high temperatures

Sommitsch, C. & Rüf, G., 2005, International Conference on Technology of Plasticity. ., p. 327-328

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Schmiedetechnik. Leoben: Lehrstuhl für Umformtechnik, p. 113-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 13 Jul 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, Verformungskundliches Kolloquium. Lehrstuhl f. Umformtechnik, p. 139-155

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Feb 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Gefügemodelle für die Warmformgebung

Sommitsch, C. & Buchmayr, B., 2005, Freiberger Forschungsforum - Berg- und Hüttenmännischer Tag. ., p. 16-26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Gefügemodelle für die Warmformgebung

Sommitsch, C. & Buchmayr, B., 16 Jun 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure Simulation in Radial Forging of Nickel Base Alloys

Harrer, O-K., Sommitsch, C., Wallner, S. & Wieser, V., 27 Apr 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure Simulation in Radial Forging of Nickel Base Alloys

Harrer, O-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, ESAFORM Conference on Material Forming. ., p. 515-518

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of creep-fatigue in containers during aluminium and copper extrusion

Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 19 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On meta-dynamic and static recrystallisation of the nickel based alloy 80a

Sommitsch, C., Pölt, P., Mitsche, S. & Kleber, S., 12 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the determination of recrystallised fraction during hot forming

Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In : Steel grips. 3, p. 287-293

Research output: Contribution to journalArticleResearch