Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

2011

Mikrostrukturmodellierung in Ti-6Al-4V während der thermo-mechanischen Behandlung

Krumphals, A. & Sommitsch, C., 4 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Sommitsch, C. & Stockinger, M., 17 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs – Abständen in komplexen Systemen

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 13 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 2011, Erfahrungsausstausch Reibschweißen. ., p. 1-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 1 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the Theory of Microstructure Changes in Metals: Hardening, Recovery, Grain Boundary Motion, and Recrystallization

Mitter, W. & Sommitsch, C., 2011, 1 ed. Graz: Verlag der Technischen Universität Graz. (Advanced Materials Science)

Research output: Book/ReportBookResearch

Particle distance distributions and their effect on precipitate strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 2 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Particle Distance Distributions and Their Effect on Precipitate Strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 17 Jan 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical Simulation of Hot Ductility of Continuous Cast Steels with in-situ solidified Hot Tensile Test

Djuric, D., Sommitsch, C., Zamberger, S. & Stiefler, F., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Sommitsch, C. & Stockinger, M., 26 Feb 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Stockinger, M. & Sommitsch, C., 2011, XXX. Verformungskundliches Kolloquium. ., p. 31-36

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Study of the transformation kinetics during hot rolling

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In : The International journal of multiphysics. Spec. Edit, p. 209-217

Research output: Contribution to journalArticleResearchpeer-review

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 2011, Tagungsskript Gefüge und Bruch. ., p. 207-217

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Werkstoffmodellierung und Prozesssimulation in der Schweißtechnik

Sommitsch, C. & Enzinger, N., 5 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2010, Proceedings EuroSuperalloys 2010 - European Symposium on Superalloys and their Application. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 25 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for modelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 2010, MMM2010. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep strength and microstructural evolution of 9-12% Cr hear resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010.

Research output: Contribution to conferencePosterResearch

Creep strength and microstructural evolution of 9-12% Cr heat resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010, 9th Liege Conference on Materials for Advance Power Engineering. ., p. 261-271

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entwicklung, Modellierung und Strukturanalyse von modernen Stählen für hocheffiziente Kraftwerke

Mayr, P., Sommitsch, C. & Kothleitner, G., 2010, In : TU Graz research. 4, p. 13-15

Research output: Contribution to journalArticleResearch

Open Access
File

Ermittlung von diffusiblem Wasserstoff in hochfestem Schweißgut

Kapl, S., Zwettler, F., Rauch, R., Duchaczek, H., Enzinger, N. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Grain growth during annealing: experiments vs. modelling

Sommitsch, C., Candic, M. & Tian, B., 4 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Hot Cracking by welding and Casting

Djuric, D., Hadzic, S. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Hot extrusion technology generation on the basis of FEM and FMEA analysis

Randelović, S., Milosavljević, P. & Sommitsch, C., 2010, In : Strojarstvo = Journal for theory and application in mechanical engineering. 52, 1, p. 43-50

Research output: Contribution to journalArticleResearchpeer-review

INFLUENCING WELDING RESIDUAL STRESSES OF HSS BY MECHANICAL POST WELD TREATMENTS

Rahman, M. M., Hütter, A., Enzinger, N. & Sommitsch, C., 2010, (Accepted/In press) IDDRG Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Interaction of the Precipitation Kinetics of Delta and Gamma Prime Phases in Nickel-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, In : Materials Science Forum. 638-642, p. 2712-2717

Research output: Contribution to journalArticleResearchpeer-review

Lifetime prediction of tools made of hot work steels

Krumphals, F. & Sommitsch, C., 26 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Metadynamic recrystallization of the nickel-based superalloy Allvac 718PlusTM

Sommitsch, C., Huber, D. & Stockinger, M., 2010, In : Materials Science Forum. 638-642, p. 2327-2332

Research output: Contribution to journalArticleResearchpeer-review

Microstructure modelling of Ti-6Al-4V during thermomechanical treatment

Krumphals, A. & Sommitsch, C., 8 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 4 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 2010, High Performance Materials. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling and Simulation of Strengthening in Complex Martensitic 9-12% Cr Steel and a Binary Fe-Cu Alloy

Holzer, I., Sommitsch, C. (ed.), Reichmann, K. (ed.) & Hofer, F. (ed.), 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic series TU Graz : Advanced materials science ; vol. 2)

Research output: Book/ReportBookResearch

Modelling of Beta Grain Coarsening in Ti-6Al-4V during Isothermal Heat Treatment

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of diffusional creep in polycrystals

Pein, C. & Sommitsch, C., 2010, Proceedings of the 9th Liège Conference on Materials for Advanced Power Engineering. ., p. &-&

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of diffusional creep in polycrystals - Poster

Pein, C. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 4 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of structure evolution and mechanical properties during thermo-mechanic processing of the α−β titanium alloy Ti-6Al-4V

Krumphals, A. & Sommitsch, C., 25 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling the Forming Limit during Cross-Rolling of Seamless Pipes Using a modified Continuum Damage Mechanics Approach

Pschera, R., Klarner, J. & Sommitsch, C., 2010, In : Steel research international. 81, p. 686-690

Research output: Contribution to journalArticleResearchpeer-review

Modelling the microstructure evolution of a ferritic hot work tool steel during short-term creep

Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010, Proceeding MMM2010. ., p. 458-461

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neue Fügetechniken mit höherer Prozesssicherheit

Sommitsch, C., Posch, G., Weinberger, T. & Figner, G., 2010, In : Berg- und hüttenmännische Monatshefte. 155, 5, p. 213-220

Research output: Contribution to journalArticleResearchpeer-review

Numerical analysis of the influence of rolling conditions on the microstructure evolution during hot rolling of aluminium alloy 5083 using a physical model

Sherstnev, P., Melzer, C. & Sommitsch, C., 2010, Proceeding 12th International Conference on Aluminium Alloys. ., p. 542-547

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical Analysis of the influence of rolling conditions on the microstructure evolution during hot rolling of aluminium alloy 5083 using a physical model

Sherstnev, P., Melzer, C. & Sommitsch, C., 5 Sep 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation of the Precipitation Kinetics of Nitrides and Carbides in Microalloyed Steel

Radis, R., Sommitsch, C. (ed.), Reichmann, K. (ed.) & Hofer, F. (ed.), 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic series TU Graz : Advanced materials science ; vol. 3)

Research output: Book/ReportBookResearch

Numerical Simulation of the Simultaneous Precipitation of Delta and Gamma Prime Phases in the Ni-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 9 Oct 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch