Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

2014

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2013, In : Key engineering materials. 554-557, p. 2054-2061

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2013, In : Wear. 314, p. 28-35

Research output: Contribution to journalArticleResearchpeer-review

Corrigendum to "Microstructure development in hot deformed AA6082" [Mater. Sci. Eng. A 528 (2011) 2423-2430]

Poletti, M. C., Rodriguez-Hortalá, M., Hauser, M. & Sommitsch, C., 1 Mar 2013, In : Materials science and engineering / A. 564, p. 288 1 p.

Research output: Contribution to journalArticleResearchpeer-review

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2013, 9th International Conference on Trends in Welding Research. ., p. 376-381

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Das Kompetenznetzwerk für Fügetechnik JOIN4+

Enzinger, N. & Sommitsch, C., 2013, Graz: Verlag der Technischen Universität Graz. (TU Graz research)

Research output: Book/ReportOther reportResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 12 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N., Mitsche, S. & Sommitsch, C., 2013, In : Welding in the world. 57, 6, p. 895-902

Research output: Contribution to journalArticleResearchpeer-review

Hot Deformation of AA6082 Containing Fine Intermetallic Particles

Poletti, M. C., Wójcik, T. & Sommitsch, C., 2013, In : Metallurgical and materials transactions / A. 44, p. 1577-1586

Research output: Contribution to journalArticleResearchpeer-review

Influence of deformation on phase transformation and precipitation

Kozeschnik, E., Timoshenkov, A., Piotr, W., Albu, M., Klarner, J., Gruber, G. & Sommitsch, C., 8 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Innovative Schweißlösungen für moderne Werkstoffe

Tändl, J., Enzinger, N. & Sommitsch, C., 15 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Intelligente Oberflächen für Implantate

Leithner, A., Warchomicka, F. G., Martinelli, E., Sommitsch, C. & Weinberg, A. M., 4 Jul 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mathematical Modelling of Weld Phenomena 10

Sommitsch, C. (ed.) & Enzinger, N. (ed.), 2013, 1 ed. .

Research output: Book/ReportBookResearch

Microstructure evolution and Precipitation modeling in Ni-based alloy C-263

Vujic, S., Beal, C., Sommitsch, C., Di Martino, F., Hogg, S., Matera, S., Tassa, O. & Zurek, J., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 5 May 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, In : Materials Science Forum. 753, p. 353-356

Research output: Contribution to journalArticleResearchpeer-review

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 22 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Physical Simulation of the Hot Ductility of In-situ Solidified Steels

Caliskanoglu, O., Ilie, S., Beal, C. & Sommitsch, C., 16 Jun 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Research in Joining Technologies in Austria

Enzinger, N. & Sommitsch, C., 2013, In : The Paton welding journal. 10-11, p. 92-95

Research output: Contribution to journalArticleResearch

RULE-BASED EXPERT SYSTEM APPLICATION TO OPTIMIZING OF MULTISCALE MODEL OF HOT FORGING AND HEAT TREATMENT OF TI-6AL-4V

Maciol, P., Krumphals, A., Jędrusik, S., Macioł, A. & Sommitsch, C., 2013, V Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED 2013). ., p. 1237-1248

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Schweißgerät der Superlative

Sommitsch, C., Enzinger, N., Beal, C. & Tändl, J., 17 Jan 2013, Kleine Zeitung / Stadtausgabe, p. 26-27.

Research output: Contribution to specialist publicationArticleResearch

Study of creep cavitation behavior in tempered martensitic steel using synchrotron micro-tomography and serial sectioning techniques

Gupta, C., Toda, H., Schlacher, C., Adachi, Y., Mayr, P., Sommitsch, C., Usegi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Materials science and engineering / A. A564, p. 525-538

Research output: Contribution to journalArticleResearchpeer-review

Study of Creep damage in a 10.86% Cr Heat Resistant Steel using Synchrotron X-ray Microtomography

Gupta, C., Toda, H., Schlacher, C., Mayr, P., Sommitsch, C., Uesugi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Advanced Materials Research. 794, p. 476-483

Research output: Contribution to journalArticleResearchpeer-review

2012

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 2012, (Accepted/In press) Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse. Tscheljabinsk: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 24 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis of creep cavitation in advanced 9-12%Cr steels using 3-D characterization

Gupta, C., Toda, H., Hoshino, H., Yamauchi, S., Kobayashi, M., Schlacher, C., Sommitsch, C., Mayr, P., Adachi, A., Usegi, K., Suzuki, Y. & Takeuchi, A., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., p. C17-C18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis of low-stress creep testing data and its implication on the life-time prediction for 9-12% Cr steels

Mayr, P., Schlacher, C., Mendez Martin, F., Radis, R. & Sommitsch, C., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., Vol. 12. p. C24-C25 (Creep and Fracture of Engineering Materials and Structures).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis of plastic flow during friction stir spot welding using finite element modelling

Gao, Z., Krumphals, F., Sherstnev, P., Enzinger, N., Niu, J. T. & Sommitsch, C., 2012, In : Key engineering materials. 504-506, p. 419-424

Research output: Contribution to journalArticleResearchpeer-review

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 28 Aug 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2012, Proceedings 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 344-351

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A simple FE approach to study microstructural influences in power-law creep

Pein, C. & Sommitsch, C., 2012, In : Computational materials science. 52, p. 73-76

Research output: Contribution to journalArticleResearchpeer-review

CORROSION AND MECHANICAL PROPERTIES OF WELDED ALUMINIUM AND MAGNESIUM ALLOYS FOR REFRIGERATION COMPRESSORS IN COMPARISON WITH DEEP-DRAWING STEEL

Kerschbaumer, K. G., Vallant, R., Enzinger, N. & Sommitsch, C., 2012, 20th JUBILEE CONFERENCE ON MATERIALS AND TECHNOLOGY. ., p. 129-129

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Uesugi, K., Suzuki, Y. & Sommitsch, C., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Das österreichische Kompetenznetzwerk für Fügetechnik K-Porjekt JOIN4+

Enzinger, N. & Sommitsch, C., 2012, Tagungsband 8. Chemnitzer Symposium Füge- und Schweißtechnik. Chemnitz: Universitätsverlag Chemnitz, p. 27-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Deformation behaviour of a ferritic hot-work tool steel with respect to the microstructure

Krumphals, F., Reggiani, B., Donati, L., Wlanis, T. & Sommitsch, C., 2012, In : Computational materials science. 52, p. 40-45

Research output: Contribution to journalArticleResearchpeer-review

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 2012, Internationaler Fachkongress der Schweiß- und Verbindungstechnik JOIN-EX. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 11 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6A1-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 493-496 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure
Processing
Aircraft
Forging
Cost reduction

Evolution of Beta Grain Size During Beta Phase Processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Proceedings of the 12th World Conference on Titanium. Beijing: Science Press, Vol. Volume I. p. 493-496

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N. & Sommitsch, C., 20 Feb 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Grain growth during annealing: experiments and modelling

Candic, M., Tian, B. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 611-616

Research output: Contribution to journalArticleResearchpeer-review

Impacts on the mechanical properties of aluminum base material due to pin welding

Wittwer, L., Enzinger, N. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Influence of microstructural inhomogenities on internal stress and strain distributions during creep

Pein, C., Sonderegger, B. & Sommitsch, C., 2012, In : Advanced Materials Research. 409, p. 411-416

Research output: Contribution to journalArticleResearchpeer-review