Research Output per year
Research Output
2019
CP-FE modelling and experimental investigation of gradient structured Al wires
Pourbashiri, M., Poletti, M. C., Sedighi, M. & Sommitsch, C., 26 Sep 2019.Research output: Contribution to conference › Poster › Research › peer-review
Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process
Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.Research output: Contribution to conference › Poster › Research
Multi scale topography in titanium alloys by electron beam technique: influence on the tissue adhesion and bacterial contamination
Warchomicka, F. G., Ramskogler, C., Ferraris, S., Cochis, A., Rimondini, L., Weinberg, A., Spriano, S. & Sommitsch, C., 8 May 2019, p. 1. 1 p.Research output: Contribution to conference › Poster › Research
2018
Experimentelle Untersuchung und statistische Analyse wesentlicher Prozessparameter beim Stanznieten von 6xxx Aluminiumblechen
Hönsch, F., Domitner, J., Sommitsch, C. & Götzinger, B., 2018.Research output: Contribution to conference › Poster › Research
2017
Ermittlung von Materialparameter für Umformverfahren
Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.Research output: Contribution to conference › Poster › Research › peer-review
Open Access
File
2016
In Situ Phase Investigations of X20Cr13 High Cr Steel
Mitsche, S., Plesiutschnig, E. & Sommitsch, C., 2016.Research output: Contribution to conference › Poster › Research
Validierung Computertomografie-Reinheitsgradmessung mittels automatisierter Lichtmikroskopie
Decker, C., Schützenhöfer, W., Plank, B., Plesiutschnig, E. & Sommitsch, C., 10 May 2016.Research output: Contribution to conference › Poster › Research
2015
Relation between prior austenite grain size creep rupture life and pore evolution of 9% Cr steels
Plesiutschnig, E., Dikovits, M., Prodinger, D., Sommitsch, C., Wallner, S. & Zeiler, G., 2015.Research output: Contribution to conference › Poster › Research
2014
Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen
Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014.Research output: Contribution to conference › Poster › Research
Microstructure for an optimized creep rupture strength of high Cr steels
Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.Research output: Contribution to conference › Poster › Research
Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications
Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.Research output: Contribution to conference › Poster › Research
Open Access
File
Surface Structuring of Biomaterials by Electron Beam Technique
Stütz, M., Warchomicka, F. G., Ramskogler, C., Poletti, M. C. & Sommitsch, C., 2014.Research output: Contribution to conference › Poster › Research
Systematic Materials Selection for Warehouse Shuttle Vehicles
Aigner, M., Caliskanoglu, O. & Sommitsch, C., 2014.Research output: Contribution to conference › Poster › Research
2012
Impacts on the mechanical properties of aluminum base material due to pin welding
Wittwer, L., Enzinger, N. & Sommitsch, C., 2012.Research output: Contribution to conference › Poster › Research
Open Access
File
Investigation of Creep Damage in Martensitic 9‐12% Cr Steel Crosswelds using Synchrotron X‐ray Micro‐tomography
Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2012.Research output: Contribution to conference › Poster › Research
Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters
Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012.Research output: Contribution to conference › Poster › Research
2011
Hot deformation of AA6082 containing fine intermetallic inclusions
Poletti, M. C. & Sommitsch, C., 2011.Research output: Contribution to conference › Poster › Research
Open Access
File
Mikrostrukturentwicklung beim Friction Stir Processing von Ti-6Al-4V
Ramskogler, C., Krumphals, A. & Sommitsch, C., 2011.Research output: Contribution to conference › Poster › Research
Physical Simulation of Hot Ductility of Continuous Cast Steels with in-situ solidified Hot Tensile Test
Djuric, D., Sommitsch, C., Zamberger, S. & Stiefler, F., 2011.Research output: Contribution to conference › Poster › Research
Open Access
File
2010
Creep strength and microstructural evolution of 9-12% Cr hear resistant steels during creep exposure at 600°C and 650°C
Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010.Research output: Contribution to conference › Poster › Research
Ermittlung von diffusiblem Wasserstoff in hochfestem Schweißgut
Kapl, S., Zwettler, F., Rauch, R., Duchaczek, H., Enzinger, N. & Sommitsch, C., 2010.Research output: Contribution to conference › Poster › Research
Hot Cracking by welding and Casting
Djuric, D., Hadzic, S. & Sommitsch, C., 2010.Research output: Contribution to conference › Poster › Research
Modelling of Beta Grain Coarsening in Ti-6Al-4V during Isothermal Heat Treatment
Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 2010.Research output: Contribution to conference › Poster › Research
Modelling of diffusional creep in polycrystals - Poster
Pein, C. & Sommitsch, C., 2010.Research output: Contribution to conference › Poster › Research
On Modelling the Microstructure Evolution of a Ferritic Hot-Work Tool Steel during Short-Term Creep
Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010.Research output: Contribution to conference › Poster › Research
Transmission Electron Microscopy Investigations of a 12 wt.% Martensitic Cr Steel Designed for High Temperature Service
Mendez Martin, F., Albu, M., Sonderegger, B., Mayr, P. & Sommitsch, C., 2010.Research output: Contribution to conference › Poster › Research
2009
Grain-subgrain structure analyses of hot deformed superalloy Allvac 718plusTM by EBSD
Mitsche, S., Sommitsch, C., Huber, D., Pölt, P. & Stockinger, M., 2009.Research output: Contribution to conference › Poster › Research
Microstructure evaluation of 12% Cr steel using TEM technique
Mendez Martin, F., Albu, M., Sonderegger, B. & Sommitsch, C., 2009.Research output: Contribution to conference › Poster › Research
2008
Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD
Mitsche, S., Sommitsch, C., Ebner, T., Sherstnev, P. & Hacksteiner, M., 2008.Research output: Contribution to conference › Poster › Research
Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus
Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 2008.Research output: Contribution to conference › Poster › Research
Untersuchung der rekristallisierten Kornstruktur der Nickelbasislegierung Allvac 718PLUS durch unterschiedliche Ätzverfahren und Validierung der Ergebnisse mittels EBSD Messungen
Winter, G., Huber, D., Sommitsch, C., Mitsche, S. & Stockinger, M., 2008.Research output: Contribution to conference › Poster › Research
2007
Combined EBSD, FIB and TEM Investigation of the crack behaviour of the nickel based alloy 80A
Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.Research output: Contribution to conference › Poster › Research
CRACK BEHAVIOUR OF THE NICKEL BASED ALLOY 80A DURING HOT FOMRING
Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.Research output: Contribution to conference › Poster › Research
EBSD - Some experimental and some fundamental problems
Pölt, P., Mitsche, S. & Sommitsch, C., 2007.Research output: Contribution to conference › Poster › Research
On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L
Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.Research output: Contribution to conference › Poster › Research
Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation
Pschera, R., Sommitsch, C. & Winter, G., 2007.Research output: Contribution to conference › Poster › Research
2006
Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison
Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.Research output: Contribution to conference › Poster › Research
Modellierung der duktilen Schädigung während der Warmumformung
Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.Research output: Contribution to conference › Poster › Research
2005
Blechprüfung
Sommitsch, C. & Buchmayr, B., 2005.Research output: Contribution to conference › Poster › Research
2004
An EBSD-study of recrystallisation behaviour of a Nickel base alloy caused by hot compression
Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2004.Research output: Contribution to conference › Poster › Research
EBSD-and the recrystallisation of Ni-base alloy
Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004.Research output: Contribution to conference › Poster › Research
Stress Relaxation Measurements of Metadynamic and Static Recrystallisation of Alloy 80A
Kleber, S., Sommitsch, C. & Wiessner, M., 2004.Research output: Contribution to conference › Poster › Research
Open Access
File
2003
Quantification of the recrystallized fraction in a nickel-base-alloy from EBSD-data
Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2003.Research output: Contribution to conference › Poster › Research
Open Access
File