Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2003

Simulation of engine acoustics — run-up analysis of an Audi V8 engine

Fischer, P. & Tapp, C., 2003, In : AutoTechnology. 3, 1, p. 70-73

Research output: Contribution to journalArticleResearch

Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge Shaped Dampers

Panning, L. ., Sextro, W. & Popp, K. ., 2003, In : International journal of rotating machinery. 9, 3, p. 219-228

Research output: Contribution to journalArticleResearchpeer-review

Technologien zur Reduktion der Abgasemissionen von Kleinmotoren

Kirchberger, R., 2003, In : Österreichische Ingenieur- und Architekten-Zeitschrift. 148. Jg., 4, p. 108-113

Research output: Contribution to journalArticleResearch

Transition Modeling using Two Different Intermittency Transport Equations

Pecnik, R., Sanz, W., Gehrer, A. & Woisetschläger, J., 2003, In : Flow, turbulence and combustion. 70, 1, p. 299-323

Research output: Contribution to journalArticleResearchpeer-review

Verfügbarkeitsprognose für Materialflußsysteme

Jodin, D., 2003, In : Fördertechnik. 6, p. 16-16

Research output: Contribution to journalArticleResearch

Vibration Damping by Friction Forces - Theory and Applications

Popp, K. ., Panning, L. . & Sextro, W., 2003, In : Journal of vibration and control. 9, 3, p. 419-448

Research output: Contribution to journalArticleResearchpeer-review

2004

Aerodynamic behaviour of prismatic bodies with sharp and rounded edges

Reisenberger, E., Meile, W., Brenn, G. & Müller, W., 2004, In : Experiments in fluids. 37, p. 547-558

Research output: Contribution to journalArticleResearchpeer-review

Analysis of steady state creep behaviour of 9-12% chromium ferritic-martensitic steels

Dimmler, G., Weinert, P. & Cerjak, H-H., 2004, In : Materials science and technology. 20, p. 1525-1530

Research output: Contribution to journalArticleResearchpeer-review

Beitrag zum Qualitätsmanagement im Asphaltstraßenbau

Zunk, B. M., 2004, FSV aktuell - Mitteilungen der Österreichischen Forschungsgemeinschaft Straße und Verkehr, FSV aktuell Mai 2004.

Research output: Contribution to specialist publicationArticleResearch

Open Access
File

Beitrag zur Neuberufung als Professor für "Mechanik" am Institut für Mechanik

Sextro, W., 2004, In : Forschungsjournal der Technischen Universität Graz. p. 29-29

Research output: Contribution to journalArticleResearch

Betriebliche Informationssysteme vor dem nächsten Quantensprung

Emmel, P. & Vössner, S., 2004, In : WING-Business. Nr. 1, p. 14-16

Research output: Contribution to journalArticleResearch

Comparison of aerosol therapy with different prefluorocarbons in surfactant-depleted animals

von der Hardt, K., Kandler, M. A., Brenn, G., Scheuerer, K., Schoof, E., Dötsch, E. & Rascher, W., 2004, In : Critical care medicine. 32, 5, p. 1200-1206

Research output: Contribution to journalArticleResearchpeer-review

Concentration fields in drying droplets

Brenn, G., 2004, In : Chemical engineering & technology. 27, 12, p. 1252-1258

Research output: Contribution to journalArticleResearchpeer-review

Das ChristophorusHaus - ein multifunktionales Verwaltungsgebäude in Passivhausbauweise

Fink, C., Blümel, E. & Mach, T., 2004, In : Energie-effizientes Bauen. 5, 1, p. 14-18

Research output: Contribution to journalArticleResearch

Der Wissensmanager

Ninaus, M., 2004, Wissensmanagement Impulse.

Research output: Contribution to specialist publicationArticleResearch

Design Optimization of the Graz Cycle Prototype Plant

Jericha, H., Göttlich, E., Sanz, W. & Heitmeir, F., 2004, In : Journal of engineering for gas turbines and power. 126, p. 733-740

Research output: Contribution to journalArticleResearchpeer-review

Die Innovation Tool Box - Unterstützung bei der Steigerung der Innovationsfähigkeit

Vorbach, S. & Seebacher, F., 2004, In : WING-Business. 1, p. 20-24

Research output: Contribution to journalArticleResearch

Die Materialflusstechnik als neue Herausforderung

Jodin, D., 2004, In : DHF. 6, p. 36-43

Research output: Contribution to journalArticleResearch

Differenzierte Betrachtung des betrieblichen Einsatzes von Linux und Open Source Software

Grünwald, S., 2004, In : WING-Business. Nr. 1, p. 8-10

Research output: Contribution to journalArticleResearch

Digital evaluation of interferograms

Woisetschläger, J., Hipp, M., Neger, T. & Reiterer, P., 2004, In : Measurement. 36, 1, p. 53-66

Research output: Contribution to journalArticleResearchpeer-review

Effiziente Prozesse machen stark

Jodin, D. & vom Bovert, E-M., 2004, In : Fördertechnik. 73, p. 12-17

Research output: Contribution to journalArticleResearch

EFTEM investigation on precipitates in creep resistant 9-12% Cr steels

Sonderegger, B., Kothleitner, G., Rechberger, W. & Cerjak, H-H., 2004, In : Materials science and technology. p. 643-650

Research output: Contribution to journalArticleResearchpeer-review

Eine neue Steuerkette ohne Polygoneffekt

Sopouch, M. & Korse, T., 2004, In : Motortechnische Zeitschrift. 05/2004, p. 382-389

Research output: Contribution to journalArticleResearch

Emission behavior of modern heavy duty vehicles in real world driving

Hausberger, S. & Rexeis, M., 2004, In : International journal of environment and pollution. 22, 3, p. 275-286

Research output: Contribution to journalArticleResearchpeer-review

Energy efficient heating and cooling systems for buildings

Halozan, H. & Rieberer, R., 2004, In : Bulletin of the International Institute of Refrigeration. 6, p. 7–22-7–22

Research output: Contribution to journalArticleResearch

Energy Filtering Transmission Electron Microscopy by the Example of a Cr steel

Letofsky-Papst, I., Warbichler, P., Hofer, F., Letofsky, E. & Jochum, C., 2004, In : Practical metallography = Praktische Metallographie. 41, 7, p. 334-343

Research output: Contribution to journalArticleResearchpeer-review

Erzeugung wasserstoffreicher Brenngase mit dem Heatpipe-Reformer

Karl, J., 2004, In : Euroheat & power. 33, 3, p. 32-36

Research output: Contribution to journalArticleResearch

Evolution of texture in Alloy 80A during initial ingot breakdown

Wasle, G., Buchmayr, B., Clemens, H., Günther, A., Brokmeier, H-G. & Kleber, S., 2004, In : Zeitschrift für Metallkunde. 95, 7, p. 639-643

Research output: Contribution to journalArticleResearch

Experimental investigation of the water vapour concentration near phase boundaries with evaporation

Schirmer, B., Melling, A. & Brenn, G., 2004, In : Measurement science & technology. 15, p. 1671-1682

Research output: Contribution to journalArticleResearchpeer-review

Flexibler Stapelroboter Octopus 350-400

Kovac, I., Gödl, M., Trummer, R. R. & Obendrauf, H., 2004, In : Betonwerk + Fertigteil-Technik. 70, 4, p. 22-28

Research output: Contribution to journalArticleResearch

Geräuschberechnung an Kraftfahrzeugen mit Statistischen Methoden

Hauer, I., Glettler, A., Jalics, K., Priebsch, H-H., Thorsten, B. & Fankhauser, C., 2004, In : Automobiltechnische Zeitschrift. 12, p. 1116-1123

Research output: Contribution to journalArticleResearch

Gründungsneigung von Technikern

Bauer, U. & Kailer, N., 2004, In : WING-Business. II;01/04, p. 20-23

Research output: Contribution to journalArticleResearch

Hysteretic Friction of a Sliding Rubber Element

Lindner, M., Sextro, W. & Popp, K., 2004, In : Proceedings in Applied Mathematics and Mechanics . 4, 1, p. 101-102

Research output: Contribution to journalArticleResearch

Open Access
File

Informationsmanagement im öffentlichen Sektor - am Beispiel Gesundheitswesen

Leodolter, W., 2004, In : WING-Business. Nr.1, p. 17-19

Research output: Contribution to journalArticleResearch

Intellektuelles Kapital – die Herausforderung für die Praxis

Winkler, R., 2004, Wissensmanagement Impulse.

Research output: Contribution to specialist publicationArticleResearch

Investigation of stator-rotor interaction in a transonic turbine stage using laser-doppler-velocimetry and pneumatic probes

Goettlich, E., Neumayer, F., Pieringer, P., Woisetschläger, J., Sanz, W. & Heitmeir, F., 2004, In : Journal of Turbomachinery. 126, p. 297-305

Research output: Contribution to journalArticleResearchpeer-review

IT-Projekte: Das Wichtigste ist aber...

Haberfellner, R., 2004, In : WING-Business. 36, 1/04, p. 5-10

Research output: Contribution to journalArticleResearch

Kombination der Systeme als pragmatischer Weg

Grünwald, S. & Haberfellner, R., 2004, In : IO new management. 9, p. 14-19

Research output: Contribution to journalArticleResearch

Konzentrationsverteilungen in trocknenden Tropfen

Brenn, G., 2004, In : Chemie-Ingenieur-Technik. 76, 3, p. 267-272

Research output: Contribution to journalArticleResearchpeer-review

Leistungsreserven stecken im Detail, Teil 1

ten Hompel, M. & Jodin, D., 2004, In : Hebezeuge und Fördermittel. 10, p. 548-550

Research output: Contribution to journalArticleResearch

Leistungsreserven stecken im Detail, Teil 2

ten Hompel, M. & Jodin, D., 2004, In : Hebezeuge und Fördermittel. 11, p. 608-612

Research output: Contribution to journalArticleResearch

Lowest Optical Excitations in Molecular Crystals: Bound Excitons versus Free Electron-Hole Pairs in Anthracene

Hummer, K., Puschnig, P. & Ambrosch-Draxl, C., 2004, In : Physical Review Letters. 92, p. 147402-147402

Research output: Contribution to journalArticleResearchpeer-review

Metallography of 9Cr steel power plant weld microstructures

Letofsky, E. & Cerjak, H-H., 2004, In : Science and technology of welding and joining. 9, 1, p. 31-36

Research output: Contribution to journalArticleResearchpeer-review

Modeling of the Vacuum Arc Remelting process at Böhler Edelstahl GmbH

Sommitsch, C., 1 Jan 2004, PAMTalk, p. 12-13.

Research output: Contribution to specialist publicationArticleResearch

Modelling of kinetics in multi-component multi-phase systems with spherical precipitates I. – Theory

Svoboda, J., Fischer, F. D., Fratzl, P. & Kozeschnik, E., 2004, In : Materials science and engineering / A. 385, 1-2, p. 166-174

Research output: Contribution to journalArticleResearchpeer-review

Modelling of kinetics in multi-component multi-phase systems with spherical precipitates II. – Numerical solution and application

Kozeschnik, E., Svoboda, J., Fratzl, P. & Fischer, F. D., 2004, In : Materials science and engineering / A. 385, 1-2, p. 157-165

Research output: Contribution to journalArticleResearchpeer-review

Modified evolution equations for the precipitation kinetics of complex phases in multi-component systems

Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2004, In : Calphad. 28, 4, p. 379-382

Research output: Contribution to journalArticleResearchpeer-review

Neue Herausforderung- Effiziente Materialflusstechnik

Jodin, D., 2004, In : Megatech. logotech, p. 58-58

Research output: Contribution to journalArticleResearch

Neue Herausforderungen - Effiziente Materialfluß-Systeme als Fundament wirtschaftlicher Logistik

Jodin, D., 2004, In : Fördertechnik. p. 32-34

Research output: Contribution to journalArticleResearch

Nitrogen pick-up during spray forming of high-alloyed steels and its influence on microstructure and properties of the final products

Kulmburg, A., Schulz, A., Uhlenwinkel, V., Bertrand, C., Kohlmann, R., Oldewurtel, A., Schneider, R. & Viale, D., 2004, In : Materials science and engineering / A. 383, p. 58-68

Research output: Contribution to journalArticleResearchpeer-review