Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Paper
2018

3D-CFD model development and validation for dual-fuel combustion in large bore engines

Eder, L., Winter, H., Pirker, G. & Wimmer, A. 26 Apr 2018

Research output: Contribution to conferencePaper

Applications of Reinforcement Learning to Step Size Control in Multi Body Simulation

Offner, G. & Schiffmann, P. 2018

Research output: Contribution to conferencePaper

A procedure to compare kinematics of Human Body Models for pedestrian assessments

Klug, C., Feist, F., Sinz, W., Ellway, J. & van Ratingen, M. 31 Jan 2018 22 p.

Research output: Contribution to conferencePaper

Boundary Layer Relaminarization in Accelerated Flow: an Experimental Investigation

Meile, W., Brenn, G., Bader, P., Pschernig, M., Sanz, W., Woisetschläger, J. & Heitmeir, F. 2018

Research output: Contribution to conferencePaper

Camera Based Full-Field Laser Interferometric Vibrometry for Combustion Diagnostics

Greiffenhagen, F., Woisetschläger, J., Gürtler, J., Kuschmierz, R. & Czarske, J. 2018

Research output: Contribution to conferencePaper

Comparison of flame transfer functions measured with locally resolved full-field-vibrometry and OH*-chemiluminescence

Greiffenhagen, F., Woisetschläger, J., Gürtler, J., Kuschmierz, R. & Czarske, J. 2018

Research output: Contribution to conferencePaper

Conversion of a steelworks off-gas fired steam generator from constant pressure to modified sliding pressure mode

Zifferer, L., Scheinecker, C., Brandstetter, G., Pechtl, P. & Sanz, W. 2018

Research output: Contribution to conferencePaper

Development of a cross-flow-turbine by using 3D-CFD-calculations

Bodner, C., Benigni, H. & Jaberg, H. 7 Sep 2018 p. CMFF18-083 9 p.

Research output: Contribution to conferencePaper

Dynamics of consumer sprays

Hinterbichler, H., Steiner, H. & Brenn, G. Jul 2018

Research output: Contribution to conferencePaper

Momentum
Aerodynamic drag
Drag coefficient
Gases
Health risks

Effectiveness assessment of a generic collision mitigation system for motorcycles at junctions

Gruber, M., Matt, C., Tomasch, E., Sevarin, A., Kolk, H., Ellersdorfer, C., Rathgeb, C., Risser, R., Hartwig, L., Ausserer, K. & Füssl, E. 2018

Research output: Contribution to conferencePaper

Entwicklung und Einsatz einer drehzahlvariablen Diagonalturbine

Schiffer-Rosenberger, J., Benigni, H., Jaberg, H., Fella, G., Wierer, C. & Winkler, C. 27 Sep 2018 p. 36-41 6 p.

Research output: Contribution to conferencePaper

Evaluation of a momentum based impact model in frontal car collisions for the prospective assessment of ADAS

Smit, S., Tomasch, E., Kolk, H., Plank, M. A., Gugler, J. & Glaser, H. 19 Apr 2018 10 p.

Research output: Contribution to conferencePaper

Experimental Design for Characterization of Force Transmissibility through Bearings in Electric Machines and Transmissions

Offner, G., Walker, J., Bewsher, S. R., Mohammadpour, M., Schweiger, C. & Sopouch, M. 2018

Research output: Contribution to conferencePaper

Gruendungsgarage: A five-year-experience at Graz University of Technology

Glinik, M. Sep 2018 (Accepted/In press)

Research output: Contribution to conferencePaper

semester
university
expert
applied science
experience

How has the Battery Electric Vehicle Transformed Car-OEM's Business Models?

Korajman, I., Rachinger, M. & Vorbach, S. Jun 2018 p. 1 - 8 8 p.

Research output: Contribution to conferencePaper

IMPROVEMENT OF INTAKE STRUCTURES WITH NUMERICAL SIMULATION

Benigni, H., Schiffer-Rosenberger, J., Höller-Litzlhammer, S. & Jaberg, H. 1 Jul 2018 p. ID509 12 p.

Research output: Contribution to conferencePaper

Maximum Efficiency for High Head Process Pumps – Optimizing Side Channel Pumps

Mosshammer, M., Benigni, H. & Jaberg, H. 19 Sep 2018 18 p.

Research output: Contribution to conferencePaper

Measurement and Simulation - Different ways to get all essential information on your valves

Mosshammer, M. & Benigni, H. 27 Nov 2018 21 p.

Research output: Contribution to conferencePaper

Methode zur parallelen, zeitaufgelösten Verschleiß- und Reibungsanalyse am Einzylinder Forschungsmotor

Edtmayer, J., Hick, H., Walch, S., Lösch, S. & Wopelka, T. 24 Sep 2018 9 p.

Research output: Contribution to conferencePaper

Multimethod Concept for Continuous Wear-Analysis of the Piston Group

Walch, S., Edtmayer, J., Hick, H., Wopelka, T. & Friedl, H. 3 Apr 2018 10 p.

Research output: Contribution to conferencePaper

Multistage Canned- Motor Pump – Getting Deep Insights with CFD – Simulation, Optimization and Validation

Mosshammer, M., Benigni, H. & Jaberg, H. 17 Sep 2018 10 p.

Research output: Contribution to conferencePaper

Pumps
Computational fluid dynamics
Unsteady flow
Turbomachine blades
Turbines

On Boundary Layer Relaminarization in an Highly Accelerated High Pressure Turbine Stator Flow

Sanz, W. & Bader, P. 2018 p. GT2017-63296

Research output: Contribution to conferencePaper

On the Modal Analysis of Fast Response Aerodynamic Pressure Probe Data

Simonassi, L., Zenz, M., Zerobin, S., Selic, T., Heitmeir, F. & Marn, A. Aug 2018 8 p.

Research output: Contribution to conferencePaper

Modal analysis
Aerodynamics
Turbines
Rotors
Secondary flow
Bicycles
Accidents
Big data

Prediction of Transition in a Turbine Cascade Using LES

Bertolini, E., Pieringer, P., Woisetschläger, J. & Sanz, W. 2018

Research output: Contribution to conferencePaper

Computational fluid dynamics
Turbines
Transmitters
Belt drives
Telemetering

Refurbishment of twin Francis turbines – maximizing the annual production

Benigni, H., Schiffer-Rosenberger, J. & Jaberg, H. 19 Sep 2018 p. Paper 196

Research output: Contribution to conferencePaper

Francis turbines
Power plants
Kaplan turbines
Patents and inventions
Cavitation

Reliable prediction of pressure pulsations in the draft tube of a Francis turbine at medium and deep part load: A validation of CFD-results with experimental data.

Schiffer-Rosenberger, J., Benigni, H., Jaberg, H. & Ehrengruber, M. 15 Oct 2018 p. Paper 6.04

Research output: Contribution to conferencePaper

Simulation of a Selected Real World Car to Bicyclist Accident using a Detailed Human Body Model

Klug, C., Feist, F. & Wimmer, P. 12 Sep 2018 p. 182 183 p.

Research output: Contribution to conferencePaper

Open Access

Simultaneous measurements of velocity and density of transient flows using high-speed camera technique

Gürtler, J., Ramos Ruiz, A. E., Kuschmierz, R., Greiffenhagen, F., Woisetschläger, J. & Czarske, J. 2018

Research output: Contribution to conferencePaper

Steady CFD Simulation of a High Pressure Turbine Rotor with Hub and Shroud Purge Flow

Sanz, W., Zerobin, S., Egger, M., Pieringer, P., Göttlich, E. & Heitmeir, F. 2018

Research output: Contribution to conferencePaper

Surface Characterization of a Real World Cylinder Liner Subject to Deposition from Combustion

Offner, G., Bewsher, S. R., Leighton, M., Mohammadpour, M. & Knaus, O. 2018

Research output: Contribution to conferencePaper

URBAN BUILDING ENERGY MODELING – METHOD AND SCENARIO CASE STUDY SCHALLMOOS

Nageler, P. J., Heimrath, R., Mach, T., Mair am Tinkhof, O., Schardinger, I., Mauthner, F., Schranzhofer, H. & Hochenauer, C. 4 Oct 2018 p. 34-41 8 p.

Research output: Contribution to conferencePaper

Heating
Hot Temperature
2017

3D Vision Guided Robotic Charging Station for Electric and Plug-in Hybrid Vehicles

Miseikis, J., Rüther, M., Walzel, B., Hirz, M. & Brunner, H. 2017

Research output: Contribution to conferencePaper

A Comprehensive Algorithm for Automatic Emergency Lane-change

Samiee, S., Shao, L., Rogic, B., Eichberger, A., Azadi, S. & Kazemi, R. 14 Aug 2017

Research output: Contribution to conferencePaper

A Domain Decomposition Multilevel Preconditioner for Interpolation with Radial Basis Functions

Offner, G., Haase, M., Martin, D. & Schiffmann, P. 2017

Research output: Contribution to conferencePaper

A Multi-Physics, Multi-Scale Investigation of the Piston Ring Pack: EPSMSO

Offner, G., Bewsher, S. R., Mohammadpour, M. & Rahnejat, H. 2017

Research output: Contribution to conferencePaper

ANALYSIS OF THE CUTTING FORCE WITH ULTRASONIC ASSISTED MANUFACTURING OF STEEL (S235JR)

Zopf, P. & Haas, F. 6 Nov 2017 8 p.

Research output: Contribution to conferencePaper