Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

2019

A Case Study based Digitalization Training for Learning Factories

Hulla, M. U., Hammer, M., Karre, H. D. & Ramsauer, C., Apr 2019, Research. Experience. Education. 9th Conference on Learning Factories 2019 . Niederlande: Elsevier B.V., Vol. 31. p. 169-174 5 p. (Procedia Manufacturing; vol. 31).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Adaptive Smart Assembly Concept in e-Mobility - A Research Direction

Brillinger, M., Abdul Hadi, M., Haas, F. & Weinzerl, M., 16 May 2019. 14 p.

Research output: Contribution to conferencePaperResearch

Adaptive Smart Production: Cognitive aspects in low volume high flexibility e-powertrain production

Brillinger, M., Haas, F., Hick, H. & Weinzerl, M., 26 Feb 2019.

Research output: Contribution to conferencePosterResearch

A dissipation potential approach to describe flow instability in alloys during hot deformation

Wang, P., Hogrefe, K., PIOT, D., MONTHEILLET, F. & Poletti, M. C., 13 Jan 2019.

Research output: Contribution to conferenceAbstractResearchpeer-review

File
dissipation
continuum mechanics
microstructure
nonequilibrium thermodynamics
plastic flow

A minimal continuum representation of a transverse isotropic viscoelastic pulp fibre based on micromechanical measurements

Seidlhofer, T., Czibula, C. M., Teichert, C., Payerl, C., Hirn, U. & Ulz, M. H., 2019, Mechanics of Materials, 135, p. 149-161 13 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Pulp
continuums
fibers
Fibers
complex compounds

Ammonia2Power project - Ammonia gas recovery via VMD for fuel cells

Guillen-Burrieza, E., Stöckl, B., Hochenauer, C., Tahir, A. J., Platzer, C. & Brunner, C., 6 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Analysis of a gas-fired absorption heat pump with different cycle configurations and superheated refrigerant at the absorber inlet

Wagner, P., Kitzinger, T. & Rieberer, R., 2019, Proc. 8th IIR Conference: Ammonia and CO2 Refrigeration Technologies.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analyzing and Managing Complex Software Ecosystems: A Framework to Understand Value in Information Systems

Vorraber, W., Müller, M., Voessner, S. & Slany, W., 1 May 2019, In : IEEE Software. 36, 3, p. 55-60 6 p., 8409423.

Research output: Contribution to journalArticleResearchpeer-review

Ecosystems
Information systems
Engines
Open source software

An analytical solution for temperature distribution in fillet arc welding based on an adaptive function

Nasiri, M. B. & Enzinger, N., 8 Mar 2019, In : Welding in the world. 63, 2, p. 409-419 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Electric arc welding
Welding
Temperature Distribution
Analytical Solution
Welds

An extended volume of fluid method and its application to single bubbles rising in a viscoelastic liquid

Niethammer, M., Brenn, G., Marschall, H. & Bothe, D., 2019, In : Journal of computational physics. 387, p. 326-355 30 p.

Research output: Contribution to journalArticleResearchpeer-review

Bubbles (in fluids)
bubbles
Fluids
fluids
Direct numerical simulation

A Novel Real Time Flexible Lane Change Method (RFLC) in Complicated Dynamic Environment for Automated Vehicles

Rafat, M., Samiee, S., Azadi, S. & Eichberger, A., 2 Jan 2019, (Submitted) In : Vehicle system dynamics. 30 p.

Research output: Contribution to journalArticleResearchpeer-review

Motion planning
Decision making
Planning

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Boron
Dimensional stability
Silicon nitride
Mechanical properties
Eutectics

A solar combi-system utilizing stable supercooling of sodium acetate trihydrate for heat storage: Numerical performance investigation

Englmair, G., Moser, C., Schranzhofer, H., Fan, J. & Furbo, S., 15 May 2019, In : Applied Energy. 242, p. 1108-1120 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Aspects of integral facade analyses

Schober, H., Bruner-Lienhart, S., Brandl, D. & Mach, T., 2019, Sustainable Design Process & Integrated Facades. Kreiner, H. & Passer, A. (eds.). Graz: Verlag der Technischen Universität Graz, p. 54-65

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Assessment of the Behaviour of a Commercial Gasification Plant During Load Modulation and Feedstock Moisture Variation

Antolini, D., Hollenstein, C., Martini, S., Patuzzi, F., Zemann, C., Felsberger, W., Baratieri, M. & Gölles, M., 11 Jun 2019, In : Waste and Biomass Valorization. 14 p.

Research output: Contribution to journalArticleResearchpeer-review

A Teaching Concept Towards Digitalization at the LEAD Factory of Graz University of Technology

Hulla, M. U., Karre, H. D., Hammer, M. & Ramsauer, C., 1 Jan 2019, The Challenges of the Digital Transformation in Education - Proceedings of the 21st International Conference on Interactive Collaborative Learning ICL2018 - Volume 2: The Challenges of the Digital Transformation in Education. Auer, M. E. & Tsiatsos, T. (eds.). Vol. 917. p. 393-402 10 p. (Advances in Intelligent Systems and Computing; vol. 917).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

digitalization
factory
Teaching
manufacturing industry
production process

Augmented Reality und IoT im Industriebereich: Umsetzung ausgewählter Anwendungsszenarien in einem Sondermaschinenbau-Unternehmen

Berer, S. & Schadler, M., 22 May 2019, p. 201-205. 1 p.

Research output: Contribution to conferencePosterResearch

Open Access

Avoiding Lock-in in Technology Firms: A Competence-based Approach

Wipfler, H., 2019

Research output: ThesisDoctoral ThesisResearch

CFD Investigation of Non-Condensable Gases in Vacuum and Non-Vacuum Steam Sterilizers

Feurhuber, M., Magno, M., Miranda, M., Prieler, R. J. & Hochenauer, C., Apr 2019, In : Chemie-Ingenieur-Technik. 91, 4, p. 502-513 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Sterilizers
Steam
Computational fluid dynamics
Gases
Vacuum

Co-creation of Value Proposition: Stakeholders Co-creating Value Propositions of Goods and Services

Vorbach, S., Müller, C. & Poandl, E. M., 2019, Co-Creation: Reshaping Business and Society in the Era of Bottom-up Economics . Redlich, T., Moritz, M. & Wulfsberg, J. P. (eds.). Springer International Publishing AG , p. 51-62 (Management for Professionals).

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Comparative study on the friction behaviour of piston/bore interface technologies

Edtmayer, J., Lösch, S., Hick, H. & Walch, S., 2019, In : Automotive and Engine Technology. 4, 3, 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Pistons
Friction
Engines
Aluminum
Passenger cars

Comparison of two material models 58 and 143 in Dyna for modelling solid birch wood

Baumann, G., Feist, F., Kurzböck, C., Müller, U. & Hartmann, S., 15 May 2019. 11 p.

Research output: Contribution to conferencePaperResearch

Wood
Hardening
Laminated composites
Bending tests
Automotive industry

Control Premium: Mehrheitsanteilswert versus Minderheitsanteilswert bei Akquisitionen von nicht-börsennotierten Unternehmen

Zunk, B. M. & Grbenic, S. O., 2019, (Accepted/In press) Unternehmen und Unternehmensrecht in Lehre und Praxis. Isola, A., Seidl, D. & Zunk, B. M. (eds.). Graz: Verlag der Technischen Universität Graz, p. 523-543

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

COOPERATION IN LOGISTICS TECHNOLOGY RESEARCH: HOW TWINNING PROJECT AFFECTS R+D IN THE FIELD OF LOGISTIC SYSTEMS AND NETWORKS

Banyai, T., Illés, B., Landschützer, C., Schenk, F. & Massi, F., 25 Apr 2019, In : Advanced Logistic Systems. 2018, 01, p. 21-36 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Co-Simulation of an Energy Management System for Future City District Energy Systems

Moser, A. G. C., Muschick, D., Gölles, M., Lerch, W., Schranzhofer, H., Nageler, P. J., Mach, T., Ribas Tugores, C. & Leusbrock, I., 14 Mar 2019, (Accepted/In press) Proceedings of the International Conference on Innovative Applied Energy.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Decarbonisation of transport: options and challenges

Boulouchos, K., Sturm, P-J., Kretzschmar, J., Duic, N., Laurikko, J., Bradshaw, A., Harmacher, T., Bettzüge, M. O., Giannopoulos, G., La Poutré, H., Blok, K., Ulleberg, O., Frank, H., Johnsson, F., Georges, G., Oswald, K., Schmidt, T. J., Bruce, P. & Gillett, W., 20 Mar 2019, European Academies Science Advisory Council. 68 p. (EASAC policy report ; vol. 37)

Research output: Book/ReportBookResearchpeer-review

Open Access
European Union
fossil fuel
energy
climate
Europe

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, (Submitted) In : AIP Conference Proceedings. 210

Research output: Contribution to journalConference articleResearchpeer-review

Der Polygoneffetk - was hilft?!

Landschützer, C., 7 Mar 2019, 27. Internationale Kranfachtagung. Scholten, J. (ed.). 1 ed. Bochum: Selbstverlag der Ruhr-Universität Bochum, Vol. 27. p. 113-137 25 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File

Designing biochar properties through the blending of biomass feedstock with metals: Impact on oxyanions adsorption behavior

Dieguez-Alonso, A., Anca-Couce, A., Frišták, V., Moreno-Jiménez, E., Bacher, M., Bucheli, T. D., Cimò, G., Conte, P., Hagemann, N., Haller, A., Hilber, I., Husson, O., Kammann, C. I., Kienzl, N., Leifeld, J., Rosenau, T., Soja, G. & Schmidt, H. P., 1 Jan 2019, In : Chemosphere. 214, p. 743-753 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Biomass
Feedstocks
Adsorption
Metals
adsorption

Designing “Better” Global Purchasing and Supply Management Teaching Programmes by Understanding Cross-Cultural Challenges and Differences: The Bi-Continental Approach Europe-Asia

Zunk, B. M., Stek, K. & Schiele, H., 2019, (Accepted/In press) Proceedings of the 11th Annual International Conference on Education and New Learning Technologies (EDULEARN): Enhancing the Learning Experience. 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design of a roll test bench for investigating thermo-mechanical tool wear

Domitner, J., Stern, T., Leitner, A. T., Aigner, M., Paar, A., Trickl, T., Elizondo, L. & Sommitsch, C., 2019, Proceedings of the TOOLING 2019 Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a hybrid facade element & Combined thermal evaluation of the UNAB facade panel

Schober, H., Brandl, D. & Mach, T., 2019, Sustainable Design Process & Integrated Facades. Kreiner, H. & Passer, A. (eds.). Graz: Verlag der Technischen Universität Graz, p. 88-105 & 120-129

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

DEVELOPMENT OF FULLY AUTOMATED TEST BED FOR MEASURING STATIC CHARACTERISTICS OF DIRECTIONAL HYDRAULIC VALVES

Tic, V. & Edler, J., 15 May 2019, Proceedings on Engineering Science: 16th. International Conference on Tribology. 1 ed. Serbien, Vol. 1. p. 607- 611 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of the UNAB facade

Schober, H., Boskovic, V., Auer, P., Brandl, D. & Mach, T., 2019, Sustainable Design Process & Integrated Facades. Kreiner, H. & Passer, A. (eds.). Graz: Verlag der Technischen Universität Graz, p. 76-87

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Die Betondecke speichert und heizt

Ramschak, T., Becke, W., Fink, C., Heimrath, R., Lerch, W. & Mach, T., Jan 2019, TGA-Planung , p. 158-161.

Research output: Contribution to specialist publicationArticleResearch

Digital Entrepreneurship: MOOCs in Entrepreneurship Education: The Case of Graz University of Technology

Vorbach, S., Poandl, E. M. & Korajman, I., 2019, (Accepted/In press) Advances in Intelligent Systems and Computing: ICL Proceedings 2018. Springer

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Digital Entrepreneurship Education - The Role of MOOCs

Vorbach, S., Poandl, E. M. & Korajman, I., 2019, (Accepted/In press) In : International Journal of Engineering Pedagogy. 8, 5

Research output: Contribution to journalArticleResearchpeer-review

Digitalisierung eines Milkruns

Eder, M. J., Hulla, M. U., Gotthardt, S. J., Karre, H. D. & Ramsauer, C., 22 May 2019, p. 193-194.

Research output: Contribution to conferencePosterResearch

Open Access

Digitalized milk-run system for a learning factory assembly line

Gotthardt, S. J., Hulla, M. U., Eder, M. J., Karre, H. D. & Ramsauer, C., Apr 2019, Research. Experience. Education. 9th Conference on Learning Factories 2019 (CLF 2019), Braunschweig, Germany. Niederlande: Elsevier B.V., Vol. 31. p. 175-179 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Discussion of laser interferometric vibrometry for the determination of heat release fluctuations in an unconfined swirl-stabilized flame

Greiffenhagen, F., Peterleithner, J., Woisetschläger, J., Fischer, A., Gürtler, J. & Czarske, J., 2019, In : Combustion and flame. 201, p. 315-327 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Chemiluminescence
chemiluminescence
flames
heat
Lasers

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Driver Drowsiness Detection Based on Steering Wheel Data Applying Adaptive Neuro-Fuzzy Feature Selection

Arefnezhad, S., Samiee, S., Eichberger, A. & Nahvi, A., 22 Feb 2019, In : Sensors . 19, 4, 14 p., 943.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
sleep
Sleep Stages
Fuzzy inference
wheels
Feature extraction

Eco-friendly, energy- and cost-efficient A/C system with heat pump functionality using R744 for rail applications

Schrank, P., Rauch, A., Presetschnik, A. & Rieberer, R., 11 Apr 2019, Proceedings 8th Conference on Ammonia and CO2 Refrigeration Technologies. Ohrid, R. Macedonia, p. 249 - 256 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
Rails
Pumps
Costs
Intelligent control
Refrigerants

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Preheating
Residual stresses
Melting
Hatches
Lasers

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Efficiency Increase of Solar Heated Buildings by Thermal Activation of Construction Elements

Lerch, W., Heimrath, R., Heinz, A., Mach, T., Fink, C. & Ramschak, T., 25 Jan 2019, In : Applied Mechanics and Materials . 887, p. 659-666 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Solar buildings
Chemical activation
Heating
Hot Temperature
Thermal energy

Einfluss unterschiedlicher Helme auf die Verletzungsschwere beim Moped Unfall - Unfallanalyse und Verletzungsschwere

Tomasch, E., Kofler, D., Klug, C., Hoschopf, H. & Spitzer, P., 10 Apr 2019, p. 67-73. 7 p.

Research output: Contribution to conferencePaperResearch

Elektronenstrahl-Schweißungen eines martensitischen Chromstahls mit lokalem Legieren

Rabl, A., Pixner, F., Duarte, B., Beal, C. & Enzinger, N., Mar 2019, In : Schweiss- & Prüftechnik. 72, 3/4, p. 54-60

Research output: Contribution to journalArticleResearchpeer-review