Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Poster
2019

Adaptive Smart Production: Cognitive aspects in low volume high flexibility e-powertrain production

Brillinger, M., Haas, F., Hick, H. & Weinzerl, M., 26 Feb 2019.

Research output: Contribution to conferencePosterResearch

Ammonia2Power project - Ammonia gas recovery via VMD for fuel cells

Guillen-Burrieza, E., Stöckl, B., Hochenauer, C., Tahir, A. J., Platzer, C. & Brunner, C., 6 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Augmented Reality und IoT im Industriebereich: Umsetzung ausgewählter Anwendungsszenarien in einem Sondermaschinenbau-Unternehmen

Berer, S. & Schadler, M., 22 May 2019, p. 201-205. 1 p.

Research output: Contribution to conferencePosterResearch

Open Access

Digitalisierung eines Milkruns

Eder, M. J., Hulla, M. U., Gotthardt, S. J., Karre, H. D. & Ramsauer, C., 22 May 2019, p. 193-194.

Research output: Contribution to conferencePosterResearch

Open Access

Implementierung eines Cyber-physischen Systems in der Intralogistik: IoT in der Fördertechnik

Mörth, O., Emmanouilidis, C., Hafner, N. & Schadler, M., 22 May 2019.

Research output: Contribution to conferencePosterResearch

Open Access

LOW-COST E-MOBILITY: Cost Reduction Through New Approaches in Production

Brillinger, M., Abdul Hadi, M., Haas, F. & Weinzerl, M., 16 May 2019.

Research output: Contribution to conferencePosterResearch

NUMERICAL SIMULATION AND EXPERIMENTAL ANALYSIS OF A NOVEL SMALL SCALE BIOMASS GRATE FIRING SYSTEM

Eßl, M., Mehrabian Bardar, R., SHIEHNEJADHESAR, A., Kelz, J., Feldmeier, S., Reiterer, T., Anca-Couce, A. & Scharler, R., 28 May 2019.

Research output: Contribution to conferencePosterResearch

Optimierung der Kühlschmierstoff-Zuführung an eine CBN-Schleifscheibe mittels 3D-Druck

Zopf, P., Höller, C., Potocnik, C., Schwemberger, P., Spenger, T., Steffan, M. & Haas, F., 13 Feb 2019.

Research output: Contribution to conferencePosterResearchpeer-review

2018

Acoustic, Aerodynamic and Aeroelastic Comparison of Different Low Pressure Turbine Exit Guide Vane Designs

Zenz, M., Simonassi, L., Selic, T., Schönleitner, F., Heitmeir, F. & Marn, A., 13 Jun 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Aluminiumpaneele für thermisch aktive Gebäudefassaden

Eckhard, R., Auer, P., Stern, T., Schober, H., Brandl, D. & Domitner, J., 2018.

Research output: Contribution to conferencePosterResearch

Characterization of spray aerosols generated from particle-free solutions and nano-particle containing suspensions (NANOaers)

Bergelt, P., Hillemann, L., Bierkandt, F., Wagener, S., Tentschert, J., Visileanu, E., Hinterbichler, H., Steiner, H., Brenn, G., Goni de Cerio, F., Brain, J. D. & Stintz, M., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Dezentrale Gebäudekühlung über fassadenintegrierte Photovoltaik: COOLSKIN

Heinz, A., Mach, T., Brandl, D., Eckschlager, F. A., Rennhofer, M., Selke, T. & Schlager, T., 14 Jun 2018.

Research output: Contribution to conferencePosterResearch

Drehzahlsynchron-Schleifprozess: Auftretende Prozesskräfte beim Schruppschleifen

Spenger, T., Steffan, M. & Haas, F., 23 Jan 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Drehzahlsynchron-Schleifprozess: Erreichbare Oberflächenqualitäten beim Schlichtschleifen

Steffan, M., Haas, F. & Spenger, T., 15 May 2018, p. 1. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

E-Achse 2030: „Design for Manufacturing“ im Kontext von I4.0

Brillinger, M. & Haas, F., 21 Jun 2018.

Research output: Contribution to conferencePosterResearch

Electrochemical characterisation of an rSOC stack under electrolysis of carbon dioxide

Preininger, M., Subotić, V., Stöckl, B., Schauperl, R., Megel, S. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Force-Controlled Friction Riveting - A Hybrid Joining Process

Pina Cipriano, G. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Joining
Friction
Aluminum

Identification of disturbances in SOFC operation and prediction of cell degradation

Subotić, V., Juricic, D., Stöckl, B., Preininger, M., Boskoski, P., Dolenc, B., Nusev, G., Menzler, N. H., Schröttner, H. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Improving the Representation of Flow by Local-Regional Scale Model Coupling

Uhrner, U., Steiner, M. & Reifeltshammer, R. J., 13 Apr 2018, p. 1-1.

Research output: Contribution to conferencePosterResearchpeer-review

Large planar SOFC-MEA operation with ammonia: Experimental analysis and performance evaluation

Stöckl, B., Subotić, V., Preininger, M., Schwaiger, M., Klopcic, N., Schröttner, H. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Material Handling Systems for Physical Internet Hubs: Evaluation and readiness of present Material Handling Systems for the Physical Internet

Ehrentraut, F. & Gabernig, H., 18 Jun 2018.

Research output: Contribution to conferencePosterResearchpeer-review

File
Materials handling
Internet
present
evaluation
Logistics

Modelling Material Flow in Friction Riveting of Polymeric Materials

Pina Cipriano, G. F., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Friction
Polymers
Plastic deformation

Modelling the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Krumphals, A., Lasnik, M., Wang, P., Kumar, S. & Poletti, M. C., 2018.

Research output: Contribution to conferencePosterResearch

Multi-Objective System Design Synthesis for Electric Powertrain Development

Hofstetter, M., 14 Jun 2018.

Research output: Contribution to conferencePosterResearchpeer-review

New ropeway system for Smart Urban Mobility & Logistics in the City of Graz

Trummer, W., Hafner, N., Hofer, K., Fellendorf, M., Fallast, K. & Huber, G., 17 Apr 2018.

Research output: Contribution to conferencePosterResearchpeer-review

On the feasibility of Friction Surfacing as an Additive Manufacturing technique

Belei Feliciano, C. A., 21 Sep 2018.

Research output: Contribution to conferencePosterResearchpeer-review

3D printers
Hard facing
Friction
Deposition rates
Fusion reactions

PoRIS - Towards Transnational River Information Systems to Foster Public Safety and Commercial Logistics

Vorraber, W., Brugger, J. B., Schöggl, F., Lichtenegger, G. C., Vössner, S., Reindl-Krauskopf, S., Salimi, F., Kaplans, M., Strondl, R., Terlecki, A., Bierbaumer, R., Harnisch, C., Wegscheider, H-P., Sattler, M., Simon, S. & Kaufmann, M., 25 Jun 2018.

Research output: Contribution to conferencePosterResearch

SmartScout - Fostering PPDR Mission Management by Integrating Different Sensor Platforms

Mösl, B., Vorraber, W., Brugger, J. B., Neubacher, D., Mostegel, K., Prüller, R., Rautz, K., Stadlmeier, S., Perko, R., Schnabel, T., Almer, A., Aichhorn, K. & Vössner, S., 25 Jun 2018.

Research output: Contribution to conferencePosterResearch

SOFC characterisation based on using an algebraic fractional-order identification approach

Dolenc, B., Nusev, G., Subotić, V., Hochenauer, C., Gehring, N., Juricic, D. & Boskoski, P., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Thermal Analysis for the Development of a Solar Thermal Activated Facade Element

Schober, H. & Brandl, D., 4 Oct 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Transformationsplanung urbaner Energiesysteme: EnergySimCity

Mach, T., Schweiger, G., Nageler, P. J., Brandl, D., Heimrath, R., Fink, C., Schranzhofer, H., Leusbrock, I. & Hochenauer, C., 14 Jun 2018.

Research output: Contribution to conferencePosterResearch

Using stable isotopes for lube oil consumption measurement on internal combustion engines

Rossegger, B., Schneider, M., Leis, A., Engelmayer, M. & Wimmer, A., 22 Nov 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2017

Adsorption mechanisms of sulfur heterocycles and the influence on the adsorption kinetics of Ag-Al2O3

Neubauer, R., Weinländer, C., Kienzl, N. & Hochenauer, C., Mar 2017.

Research output: Contribution to conferencePosterResearch

Analysis and Characterization of spray coating related nano-particle exposures

Uhrner, U., Ye, Q., Nöst, T., Tiedje, O. & Sturm, P-J., 30 Aug 2017.

Research output: Contribution to conferencePosterResearchpeer-review

File

A road map towards modeling of particle stimulated nucleation using CADD

Wurm, P. & Ulz, M. H., 25 Sep 2017, (Accepted/In press).

Research output: Contribution to conferencePosterResearch

Corporate Makerspaces - Roles, Effects and Success Factors

Böhm, T., 15 May 2017.

Research output: Contribution to conferencePosterResearch

Development of a highly efficient, compact size, micro-CHP plant for the use of various biomass fuels and operational experience

Buchmayr, M., Gruber, J., Hargassner, M. & Hochenauer, C., Aug 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Development of an Innovative Low-Cost/Low-Emission Pellet-Based Stove Technology

Gruber, T., Mehrabian Bardar, R., SHIEHNEJADHESAR, A., Bauer, T., Anca-Couce, A. & Scharler, R., 2017.

Research output: Contribution to conferencePosterResearch

Drop impacts onto assemblies of mobile and fixed particles

Planchette, C., Lorenceau, E. & Binace, A-L., 17 Jul 2017.

Research output: Contribution to conferencePosterResearchpeer-review

EAGLE – Innovatice technical solution for automated parcel unloading

Landschützer, C., Wolfschluckner, A. & Fritz, M., 4 Jul 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Einsatz von OPC UA zur Optimierung der Prozessregelung in der Schleifbearbeitung

Steffan, M. & Haas, F., 1 Feb 2017.

Research output: Contribution to conferencePosterResearch

File

EnergySimCity - A Modular Toolbox for the Planning of Urban Energy Supply Concepts

Mach, T., Leusbrock, I., Fink, C., Schweiger, G., Nageler, P. J., Heimrath, R., Brandl, D. & Schranzhofer, H., 12 Sep 2017.

Research output: Contribution to conferencePosterResearch

EnergySimCity - Modulare Toolbox zur Planung urbaner Energieversorgungskonzepte

Mach, T., Fink, C., Nageler, P., Heimrath, R., Leusbrock, I., Schweiger, G., Brandl, D., Schranzhofer, H., Schrammel, H. & Fluch, J., May 2017.

Research output: Contribution to conferencePosterResearch

Ermittlung von Materialparameter für Umformverfahren

Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Joining of steel and aluminium sheets by CMT process using a local zinc coating

Fritsch, S. & Stummer, M., 24 Jan 2017.

Research output: Contribution to conferencePosterResearch