Faculty of Mechanical Engineering and Economic Sciences (3000)

Research output

Research output per year 1949 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022

• 3477 Conference paper
• 2666 Article
• 1346 (Old data) Lecture or Presentation
• 921 Commissioned report
• 3531 More
  • 837 Other report
  • 507 Poster
  • 415 Chapter
  • 345 Diploma Thesis
  • 289 Paper
  • 246 Doctoral Thesis
  • 215 Book
  • 150 Patent
  • 98 Anthology
  • 89 Conference article
  • 73 Editorial
  • 60 Abstract
  • 48 Master's Thesis
  • 41 Habilitation
  • 34 Website / Web publication
  • 19 Bachelor's Thesis
  • 18 Other contribution
  • 10 Review article
  • 10 Lecture notes
  • 6 Other chapter contribution
  • 4 Brochure
  • 3 Comment/debate
  • 3 Preprint
  • 3 Working paper
  • 2 Foreword/postscript
  • 2 Digital or Visual Products
  • 1 Scholarly edition
  • 1 Letter
  • 1 Special issue
  • 1 Data set/Database

Research output per year

Research output per year

Search results

• 2021

  Influences of Axle- and Brake Design on Creep Groan Charcteristics: iversity course

  Huemer-Kals, S., Aug 2021

  Research output: Non-print form › Digital or Visual Products

• Initial conditions to study the temporal behavior of a viscoelastic liquid jet under perturbation

  Cottier, L., Brenn, G. & Renoult, M-C., 2021, In: Atomization and Sprays. 31, 5, p. 73-87 15 p.

  Research output: Contribution to journal › Article › peer-review

  • Liquids 62%
  • Flow 60%
  • Liquid 50%
  • Purity 47%
  • Initial value problems 32%

• Initial pre-ignition: Investigation of fundamental mechanism of initial low-speed pre-ignition

  Chia Liu, C., Schießl, R., Schweizer, T., Kubach, H., Eder, M., Grabner, P., Zöbinger, N. & Lauer, T., 23 Mar 2021. 35 p.

  Research output: Contribution to conference › Paper

  • low speed 100%
  • ignition 95%
  • engines 59%
  • oils 36%
  • deposits 27%

• Initial Pre-ignition: Identification of the mechanism for initial pre-ignition by a combination of experimental investigations and simulation of drop ignition

  Schweizer, T., Kubach, H., Zöbinger, N., Lauer, T., Eder, M., Grabner, P., Schießl, R. & Chia Liu, C., 2021, FVV Final Report: Combustion Noise Otto Engine II. Frankfurt: Forschungsvereinigung Verbrennungskraftmaschinen e.V., Vol. R597 (2021). 126 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Ignition 100%
  • Engines 42%
  • Combustion chambers 34%
  • Deposits 33%
  • Oils 28%

• Initiation of dynamic recrystallization of as-cast N08028 alloy

  Mora, E., Navarro, A., Silveira, E., Poletti, C., Mendiguren, J. & Hurtado, I., 2021, ESAFORM 2021 - 24th International Conference on Material Forming. PoPuPS (University of LiFge Library), 896. (ESAFORM 2021 - 24th International Conference on Material Forming).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  Open Access

  • Dynamic recrystallization 100%
  • Alloy 58%
  • Strain 58%
  • Austenitic stainless steel 52%
  • Strain rate 50%

• In situ assessment of isochronal phase transformations in a lamellar Ti–5Al–5Mo-5V–3Cr–1Zr alloy using synchrotron X-ray diffraction

  Callegari, B., Campo, L., Aristizabal, K., Guitar, M. A., Warchomicka, F. G., Coelho, R. S., Brito, P. P., Soldera, F., Mücklich, F. & Cavalcanti Pinto, H., 5 Feb 2021, In: Journal of Alloys and Compounds. 853, 157105.

  Research output: Contribution to journal › Article › peer-review

  • Synchrotrons 100%
  • Phase transitions 78%
  • X ray diffraction 74%
  • Decomposition 54%
  • Heating 54%

• Integration von Fahrbarkeits- und Fahrverhaltensaspekten in die virtuelle Fahrzeugentwicklung

  Domijanic, M. & Hirz, M., 29 Apr 2021, 42. International Vienna Motor Symposium - Reports of the Austrian Society of Automotive Engineers. Österreichischer Verein für Kraftfahrzeugtechnik, 19 p.

  Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution

• Intelligent & Efficient Packaging

  Landschützer, C., 2021, Supply Chain Captain: Das Prinzip für alle Einkäufer und Supply Chain Manager. Brunner, U. & Obmann, G. (eds.). Wien: Leykam Buchverlagsgesellschaft, Vol. 1. p. 193-197 5 p. 7

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

• Interactive Teaching Concept for a Data Analytics Workshop in Learning Factories

  Eder, M. J., Hulla, M. U., Auer, F. & Ramsauer, C., 2021, Proceedings of the Conference on Learning Factories (CLF) 2021. 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  Open Access

  • Data Analytics 100%
  • Industrial plants 83%
  • Teaching 80%
  • Linear algebra 23%
  • Mechanical engineering 20%

• Internal Reporting on Process Optimiziation Measures: Combination of Economic and Environmental Aspects

  Gruenbichler, R., Petschacher, B., Kollmann, R., Passer, A. & Grbenic, S. O., Dec 2021, In: Facta Universitatis. Series Economics and Organization. 18, 5, p. 421-434 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Economics 100%
  • Decision Maker 87%
  • Field Research 65%
  • Environmental Impact 60%
  • Economic Impact 58%

• Investigation of al-b4c metal matrix composites produced by friction stir additive processing

  Zubcak, M., Soltes, J., Zimina, M., Weinberger, T. & Enzinger, N., Dec 2021, In: Metals. 11, 12, 11 p., 2020.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Neutron Irradiation 100%
  • Metal Matrix Composites 86%
  • Neutron 70%
  • Neutron irradiation 67%
  • Neutrons 50%

• Investigation of electrochemical processes in solid oxide fuel cells by modified Levenberg–Marquardt algorithm: A new automatic update limit strategy

  Žic, M., Fajfar, I., Subotić, V., Pereverzyev, S. & Kunaver, M., 1 Jan 2021, In: Processes. 9, 1, p. 1-14 14 p., 108.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Solid oxide fuel cells (SOFC) 100%
  • Impedance Spectroscopy 71%
  • Electrochemical impedance spectroscopy 68%
  • Electrical Circuit 45%
  • Environment 17%

• Investigation of injury mechanisms in sledging accidents involving children and adults

  Smit, S., Trauner-Karner, J., Nader, M., Kofler, D., Erlinger, N., Feist, F. & Klug, C., 9 Sep 2021, International Research Council on the Biomechanics of Injury 2021. IRCOBI, International Research Council on biomechanics on Injury, 24 p. IRC21-64

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  Open Access

  • Accidents 100%
  • Bone 60%
  • Kinematics 49%

• Investigation of solid oxide fuel cell operation with synthetic biomass gasification product gases as a basis for enhancing its performance

  Pongratz, G., Subotić, V., Schroettner, H., Stoeckl, B., Hochenauer, C., Anca-Couce, A. & Scharler, R., Feb 2021, In: Biomass Conversion and Biorefinery. 11, 1, p. 121-139 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Solid oxide fuel cells (SOFC) 100%
  • Gasification 93%
  • Biomass 83%
  • Gas fuels 52%
  • Gases 52%

• Investigation of steady-state harmonic axial and torsional vibrations of linear rotors under arbitrarily distributed loading using the Numerical Assembly Technique

  Blümel, B., Klanner, M. & Ellermann, K., 1 Apr 2021, Proceedings of SIRM 2021: The 14th International Conference on Dynamics of Rotating Machines. p. 205 - 214 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  • Rotors 100%
  • Numerical methods 15%
  • Finite element method 10%
  • Geometry 10%

• Investigation of the degradation rate of electron beam processed and friction stir processed biocompatible ZKX50 magnesium alloy

  Iranshahi, F., Nasiri, M. B., Warchomicka, F. G. & Sommitsch, C., 6 Oct 2021, (Accepted/In press) In: Journal of Magnesium and Alloys. 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Magnesium Alloy 100%
  • Electron beams 99%
  • Electron Beam 91%
  • Magnesium alloys 88%
  • Degradation Rate 81%

• Investigation of the temperature distribution in seamless low-alloy steel pipes during the hot rolling process

  Langbauer, R., Nunner, G., Zmek, T., Klarner, J., Prieler, R. & Hochenauer, C., May 2021, In: Advances in Industrial and Manufacturing Engineering. 2, 100038.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Hot rolling 100%
  • Steel pipe 98%
  • High strength steel 88%
  • Temperature distribution 70%
  • Pipe 64%

• Investigation on Sector Coupling Potentials of a 5th Generation District Heating and Cooling Network

  Edtmayer, H., Nageler, P. J., Heimrath, R., Mach, T. & Hochenauer, C., 1 Sep 2021, In: Energy. 230, 13 p., 120836.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • district heating 100%
  • Cooling 95%
  • Heating 90%
  • District heating 89%
  • Sector 77%

• Investigations of lateral particle distribution for spherical and highly non-spherical particles by means of steady-state/transient RANS and LES simulations

  Knoll, M., Gerhardter, H., Hochenauer, C. & Tomazic, P., 22 Jan 2021, In: Powder Technology. 378, 378, p. 618-638 21 p.

  Research output: Contribution to journal › Article › peer-review

  • Channel flow 100%
  • Process design 94%
  • Slags 86%
  • Industrial applications 80%
  • Boilers 80%

• Investigations of thermal- and climate conditions in the Koralm railway tunnel

  Fruhwirt, D., 30 Oct 2021, 180 p.

  Research output: Thesis › Doctoral Thesis

  • railway 100%
  • climate conditions 96%
  • tunnel 85%
  • ventilation 23%
  • cooling 17%

• Investigations on Model Predictive Control Objectives for Motion Cueing Algorithms in Motorsport Driving Simulators

  Schwarzhuber, T., Graf, M. & Eichberger, A., 2021, Proceedings of the 32nd IEEE Intelligent Vehicles Symposium 2021. IEEE Press, p. 49-54 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  • Model predictive control 100%
  • Simulators 72%
  • Racing automobiles 37%
  • Cost functions 22%

• Keine Energiewende ohne Wärmewende

  Papousek, B. & Hochenauer, C., 2021, In: WING-Business. 2021, 2, p. 58-61

  Research output: Contribution to journal › Article › peer-review

• Klimaneutralität

  Vössner, S., 2021, In: WING-Business. 2021, 2/21, p. 3

  Research output: Contribution to journal › Editorial

• Kompetenzentwicklung in Lernfabriken

  Vössner, S., 2021, In: WING-Business. 2021, 3/21, p. 3 3/21.

  Research output: Contribution to journal › Editorial

• Konzepte zur Nutzung von Knowledge-based Engineering in der Planung intralogistischer Systeme

  Ortner-Pichler, A. & Landschützer, C., Oct 2021, Logistikwerkstatt Graz 2021: e-commerce: Gerätetechnik, Software, Organisation, Geschäftsmodelle. Landschützer, C. (ed.). Verlag der Technischen Universität Graz, p. 285-289 5 p. (Logistik Werkstatt Graz).

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper

  Open Access

• Kostenoptimierte Modellversuche für die Kleinwasserkraft

  Benigni, H., Leithner, S., Bodner, C., Jaberg, H. & Meusburger, P., 8 Aug 2021, Tagungsband Anwenderforum Kleinwasserkraft. Pforzheim: Conexio PSE, p. 104-117 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

• KW Vissoie - Pelton Verteilrohrleitung: Nachrechnung Ist-Zustand und Optimierung

  Bodner, C., Benigni, H. & Jaberg, H., 10 Dec 2021, 27 p.

  Research output: Book/Report › Commissioned report

• Land-based implications of early climate actions without global net-negative emissions

  Hasegawa, T., Fujimori, S., Frank, S., Humpenöder, F., Bertram, C., Després, J., Drouet, L., Emmerling, J., Gusti, M., Harmsen, M., Keramidas, K., Ochi, Y., Oshiro, K., Rochedo, P., van Ruijven, B., Cabardos, A. M., Deppermann, A., Fosse, F., Havlik, P., Krey, V. & 4 others, Popp, A., Schaeffer, R., van Vuuren, D. & Riahi, K., Dec 2021, In: Nature Sustainability. 4, 12, p. 1052-1059 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Climate 100%
  • land use 85%
  • Land use 78%
  • climate 68%
  • Carbon Dioxide 61%

• Liquid metal embrittlement of advanced high strength steel: Experiments and damage modeling

  Prabitz, K. M., Asadzadeh, M. Z., Pichler, M., Antretter, T., Beal, C., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 1 Sep 2021, In: Materials. 14, 18, 5451.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Embrittlement 100%
  • Advanced high strength Steel 97%
  • high strength steels 94%
  • embrittlement 87%
  • Liquid metals 83%

• Literature review on sustainability at higher education institutions

  Omazic, A., Koch, V. & Weller, S., 2021, 31st Annual Conference of Production and Operations Management Society (POMS) Building a sustainable, responsible, and resilient global future.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  • Literature Review 100%
  • Higher Education Institutions 91%
  • Sustainability 89%
  • Public Sector 33%

• Local changes in the microstructure, mechanical and electrochemical properties of friction stir welded joints from aluminium of varying grain size

  Orlowska, M., Pixner, F., Hütter, A., Kooijman, A., Jasinski, C., Gonzalez-Garcia, Y., Enzinger, N. & Lewandowska, M., 1 Nov 2021, In: Journal of Materials Research and Technology. 15, p. 5968-5987 20 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Electrochemical properties 100%
  • Grain Size 67%
  • Base Material 60%
  • Plastic Deformation 59%
  • Welds 57%

• Low velocity impact response of aluminum 2024-T3 / polyamide 6 / carbon-fiber-reinforced polyamide 6 hybrid joints produce by AddJoining

  Falck, R. & Amancio-Filho, S. T., 2021.

  Research output: Contribution to conference › Abstract › peer-review

• Measurement Approaches for Variable Compression Ratio Systems

  Plettenberg, M., Mayrhofer, N., Priestner, C., St John, R., Beermann, H. & Theissl, M., 2021, In: SAE Technical Papers. 2021

  Research output: Contribution to journal › Conference article › peer-review

  • Internal Combustion Engine 100%
  • compression 51%
  • Piston 46%
  • Simulation 41%
  • combustion engine 34%

• Measuring the fuel consumption of light- and heavy-duty vehicles and monitoring their real-world fuel consumption

  Rexeis, M., 2021

  Research output: Book/Report › Commissioned report

• Mechanical performance optimization and investigation of the effects of process parameters on the fused-filament fabrication of polyamide-6 reinforced by short carbon fibers

  Belei Feliciano, C. A., Joeressen, J. & Amancio-Filho, S. T., 2021.

  Research output: Contribution to conference › Abstract › peer-review

• Mechanical Properties of Selective Laser-Melted Components of AlSi10Mg for Prototype Vehicles

  Egger, C., Grünbart, F., Silvayeh, Z., Sulcová, O., Seper, C., Pfeifer, T., Sommitsch, C. & Domitner, J., 1 Jan 2021, In: Materials Science Forum. 1016, p. 399-406

  Research output: Contribution to journal › Conference article › peer-review

  • Selective laser melting 100%
  • vehicles 78%
  • Melting 68%
  • Die casting 65%
  • prototypes 62%

• Merger von Techno-Start-Ups/KMUs-Fragen, die sich deren Management stellen sollte

  Bauer, U., 14 Jul 2021, In: WING-Business. 2021, 2, p. 6-8 3 p.

  Research output: Contribution to journal › Article

• Metallurgy of Highly Wear-Resistant Indefinite-Chill Work Roll Materials for Hot Rolling Mills

  Paar, A., Aigner, M., Beal, C. & Sommitsch, C., 1 Jan 2021, In: Materials Science Forum. 2021, 1016, p. 1085-1090 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hot Rolling 100%
  • Hot rolling mills 93%
  • Metallurgy 79%
  • metallurgy 79%
  • cementite 61%

• Methodik zur Erstellung einer CO2-Bilanz der Orasis Industries Holding GmbH

  Wolf, M., Ramsauer, C. & Haidenbauer, M., 14 Jul 2021, In: WING-Business. 2021, 2, p. 48-53

  Research output: Contribution to journal › Article

• Methodische Entwicklung eines neuartigen Sortiersystems für Polybags

  Translated title of the contribution: Methodical development of a new sorting system for polybags Schedler, M. & Landschützer, C., 20 Sep 2021, In: Logistics Journal : Proceedings. 17, 1, p. 40-58 19 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • sorting 100%
  • justice 65%
  • energy efficiency 51%
  • simulation 44%
  • physical property 39%

• Methodology for Diagnosing Sensor Faults on Engine Test Benches

  Wohlthan, M., Pirker, G. & Wimmer, A., 3 May 2021, SMSI 2021 : Sensor and Measurement Science International : Proceedings . AMA Service GmbH, Vol. 4 (System of Units and Metreological Infrastructure). p. 300 - 301 2 p. C8.1

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review

  Open Access

  • Engines 100%
  • Sensors 80%
  • Physics 45%
  • Data structures 43%

• Microstructure and mechanical behavior of similar butt-joints of ZK60 and ZK60–1.5RE magnesium alloys produced by linear friction stir welding

  da Silva, E. P., Buzolin, R. H., Alfaro, U., Requena, G. & Pinto, H. C., 15 Sep 2021, In: Journal of Magnesium and Alloys. 9, 5, p. 1782-1796 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Magnesium Alloy 100%
  • Friction stir welding 99%
  • Magnesium alloys 88%
  • Microstructure 56%
  • Residual Stress 31%

• Microstructure Evolution and Phase Identification in Ni-Based Superalloy Bonded by Transient Liquid Phase Bonding

  Poliserpi, M., Buzolin, R., Boeri, R., Poletti, C. & Sommadossi, S., Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 3, p. 1695-1707 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Superalloys 100%
  • heat resistant alloys 97%
  • Crystal structure 80%
  • liquid phases 79%
  • Microstructure 63%

• Miscibility and wettability: how interfacial tension influences droplet impact onto thin wall films

  Bernard, R., Baumgartner, D., Brenn, G., Planchette, C., Weigand, B. & Lamanna, G., 2021, In: Journal of Fluid Mechanics. 908, 24 p., A36.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • thin walls 100%
  • Solubility 82%
  • wettability 80%
  • Surface tension 79%
  • Wetting 76%

• Mitarbeiterführung in Zeiten der Digitalisierung

  Bauer, U., 21 Dec 2021, Agile Digitalisierung im Baubetrieb: Grundlagen, Innovationen, Disruptionen und Best Practices. Hofstadler, C. & Motzko, C. (eds.). Springer Vieweg, p. 107-128 21 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Modeling of Hydrogen Diffusion in Slow Strain Rate (SSR) Testing of Notched Samples

  Drexler, A., Domitner, J. & Sommitsch, C., 2021, Advances in Hydrogen Embrittlement Study. Polyanskiy, V. A. & Belyaev, A. K. (eds.). Cham: Springer, p. 87-111 (Advanced Structured Materials; vol. 143).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  • Strain rate 100%
  • Hydrogen 86%
  • Strain 75%
  • Diffusion 67%
  • Testing 56%

• Modeling of the anisotropic thermal conductivity of fabrics embedded in a thermoplastic matrix system

  Längauer, M., Brunnthaller, F., Zitzenbacher, G., Burgstaller, C. & Hochenauer, C., Apr 2021, In: Polymer Composites. 42, 4, p. 2050-2060 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thermoplastics 100%
  • Thermal Conductivity 94%
  • Thermoforming 94%
  • Thermal conductivity 89%
  • Fiber 42%

• Modelling and Simulation of Phase Formations in Martensitic Stainless Steels

  Kresser, S., Schneider, R., Zunko, H. & Sommitsch, C., 2021, In: Berg- und hüttenmännische Monatshefte. 167, 1, p. 23-28

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Martensitic stainless steel 100%
  • Heat treatment 71%
  • Heat Treatment 69%
  • Simulation 51%
  • Alloying 47%

• Modelling fuel flexibility in fixed-bed biomass conversion with a low primary air ratio in an updraft configuration

  Anca-Couce, A., Archan, G., Buchmayr, M., Essl, M., Hochenauer, C. & Scharler, R., 15 Jul 2021, In: Fuel. 296, 120687.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Biomass 100%
  • Fuel 90%
  • Flexibility 88%
  • Gas producers 75%
  • Tar 66%

• Model parameter estimation of ball bearings using generalized Polynomial Chaos Expansion

  Prem, M. S., Klanner, M. & Ellermann, K., 1 Apr 2021, Proceedings of SIRM 2021: The 14th International Conference on Dynamics of Rotating Machines. p. 331 - 340 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review