Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2017

Numerical analysis of a hermetic reciprocating compressor oil pump system

Posch, S., Hopfgartner, J. W., Berger, E., Zuber, B., Schöllauf, P. & Almbauer, R., 5 Oct 2017, In : International journal of refrigeration. 85, p. 135-143 9 p.

Research output: Contribution to journalArticleResearchpeer-review

On the Derivation of Boundary Conditions for Continuum Dislocation Dynamics

Hochrainer, T., 30 Jul 2017, In : Crystals. 7, 235, p. 1-12 12 p., Crystals 2017, 7, 235.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
derivation
Boundary conditions
Thermodynamics
boundary conditions
continuums

On the influence of a five-hole-probe on the vibration characteristics of a low pressure turbine rotor while performing aerodynamic measurements

Schönleitner, F., Selic, T., Zenz, M., Heitmeir, F. & Marn, A., 2017, In : Technische Mechanik. 37, 2-5, p. 196-207 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Aerodynamics
Turbines
Rotors
Channel flow
Acoustics

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 29 Jul 2017, In : Acta materialia. 139 (2017), p. 39 - 50 139 (2017).

Research output: Contribution to journalArticleResearchpeer-review

On the problem of ventilation control in case of a tunnel fire event

Sturm, P-J., Beyer, M. & Rafiei, M., 2017, In : Case Studies in Fire Safety . 7, p. 36-43

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Ventilation
Tunnels
Fires
event
air

On Turbulence Measurements and Analyses in a Two-Stage Two-Spool Turbine Rig

Bauinger, S., Behre, S., Lengani, D., Guendogdu, Y., Heitmeir, F. & Göttlich, E., Jul 2017, In : Journal of Turbomachinery. 139, 7, p. 071008-1-071008-11 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Optimierung der Schleifbearbeitung mittels OPC UA: Neue Prozessregelung zur Vermeidung von thermischer Randzonenschädigung

Steffan, M., Haas, F., Zopf, P. & Edler, J., 1 Mar 2017, In : Zeitschrift für wirtschaftlichen Fabrikbetrieb. 112, 3/2017, p. 137 140 p.

Research output: Contribution to journalArticleResearchpeer-review

Optimized Process for Steel-Aluminium Welding

Götzinger, B., Karner, W., Hartmann, M. & Silvayeh, Z., 2017, In : Lightweight Design Worldwide. Vol. 10, No. 2, p. 42-46

Research output: Contribution to journalArticleResearchpeer-review

Parameterisation of a Maxwell model for transient tyre force by means of an extended firefly algorithm

Hackl, A., Hirschberg, W., Lex, C. & Magele, C., 10 Jan 2017, In : Advances in Mechanical Engineering. Vol. 9(1), 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Performance characterization of a solid oxide cell stack with chromium-based interconnects (CFY)

Preininger, M., Wurm, J., Subotić, V., Schauperl, R. & Hochenauer, C., 30 Nov 2017, In : International Journal of Hydrogen Energy. 42, 48, p. 28653-28664 12 p.

Research output: Contribution to journalArticleResearchpeer-review

electrolysis
Electrolysis
chromium
Chromium
Oxides

Porosity and density measurements of sodium acetate trihydrate for thermal energy storage

Dannemand, M., Delgado, M., Lazaro, A., Penalosa, C., Gundlach, C., Trinderup, C., Berg Johansen, J., Moser, C., Schranzhofer, H. & Furbo, S., 11 Dec 2017, In : Applied Thermal Engineering. p. 707 - 714 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Prediction of the fluid flow, heat transfer and inactivation of microorganism at medical devices in modern steam sterilizers using computational fluid dynamics

Feurhuber, M., Cattide, A., Magno, M., Miranda, M., Prieler, R. J. & Hochenauer, C., 2017, In : Applied Thermal Engineering. 127, p. 1391-1403 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Procurement in the future: Where will procurement be in 2035?

Stek, K., 21 Dec 2017, In : In-Procurement .

Research output: Contribution to journalArticleResearch

File

Produktgestaltung als Stellhebel in der agilen Produktion: Ausarbeitung und Anwendung der Design-for-Agility Methode in der Automobilindustrie

Pointner, A., Böhnke, N-C. & Ramsauer, C., 2017, In : Industrie 4.0 Management. 6/2017

Research output: Contribution to journalArticleResearchpeer-review

Pyrolysis of pellets made with biomass and glycerol: Kinetic analysis and evolved gas analysis

Bartocci, P., Anca-Couce, A., Slopiecka, K., Nefkens, S., Evic, N., Retschitzegger, S., Barbanera, M., Buratti, C., Cotana, F., Bidini, G. & Fantozzi, F., 2017, In : Biomass & Bioenergy. 97, p. 11-19

Research output: Contribution to journalArticleResearchpeer-review

Removing H2S from Biogas Using Sorbents for Solid Oxide Fuel Cell Applications

Weinländer, C., Neubauer, R., Hauth, M. & Hochenauer, C., 7 Jun 2017, In : Chemie-Ingenieur-Technik.

Research output: Contribution to journalArticleResearchpeer-review

Self-emulsification of Lipidic Drug Delivery System in Pure Water and in Concentrated Glycerol Solution

Planchette, C., Mercuri, A., Arcangeli, L., Kriechbaum, M. & Laggner, P., 2017, In : AAPS PharmSciTech . 18, 8, p. 3053-3063

Research output: Contribution to journalArticleResearchpeer-review

Simulation Models for Material Handling Equipment Design: Evaluation Criteria, Methods and Application

Stöhr, T. & Landschützer, C., 9 Nov 2017, In : Proceedings in manufacturing systems . 12, 1, p. 65-71 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Smoke propagation in the region of cross-passages in long railway tunnels – Results from full scale tests

Sturm, P-J., Thaller, T. & Rodler, J., 28 Nov 2017, In : Geomechanics and Tunnelling = Geomechanik und Tunnelbau. Volume 10, Issue 6, p. 694-699

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Social Entrepreneurship: ein Ordnungsversuch

Vorbach, S., 2017, In : WING-Business. 2/2017, p. 11-13 3 p.

Research output: Contribution to journalArticleResearchpeer-review

Solutions of vibration problems for thin infinite plates subjected to harmonic loads

Klanner, M. & Ellermann, K., 27 Jul 2017, In : Journal of Theoretical and Applied Mechanics . 55, 3, p. 949-961 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Vibration
Harmonic
Kirchhoff Plate
Closed-form Solution
Addition Theorem

Standard-Transktionsmultiplikatoren

Grbenic, S. O., 2017, In : Bewertungs-Praktiker. 13, 1, p. 27-29

Research output: Contribution to journalArticleResearchpeer-review

Standard-Transktionsmultiplikatoren

Grbenic, S. O., 2017, In : Bewertungs-Praktiker. 13, 4, p. 131-133

Research output: Contribution to journalArticleResearchpeer-review

Study of biomimetics applied to logistics: A bibliometric analysis (1990-2013)

Tinello, D., Knödl, M., Jodin, D. & Winkler, H., 9 Jan 2017, In : Logistics Journal / Reviewed Publications . 10.2195/lj_Rev_tinello_en_201701_01, 15 p.

Research output: Contribution to journalArticleResearchpeer-review

logistics
technical literature
biology
ranking
China

Sustainable Power Generation with Large Gas Engines

Pirker, G. & Wimmer, A., 30 Jun 2017, In : Energy conversion and management.

Research output: Contribution to journalArticleResearchpeer-review

The Capability of Large Eddy Simulation to Predict Relaminarization

Bader, P., Sanz, W., Christoph, S. & Leitl, P. A., 2017, In : International journal of heat and fluid flow. 68

Research output: Contribution to journalArticleResearchpeer-review

Open Access

The Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2017, In : Materials Science Forum. 879, p. 1847-1852

Research output: Contribution to journalArticleResearchpeer-review

The formation of drops from viscoelastic liquid jets and sheets - an overview

Brenn, G. & Plohl, G., 2017, In : Atomization and Sprays. 27, 4, p. 285-302

Research output: Contribution to journalArticleResearchpeer-review

Friction welding
Rivets
Resistance welding
Spot welding
Taguchi methods

Thermal in Situ and System-Integrated Regeneration Strategy for Adsorptive On-Board Desulfurization Units

Neubauer, R., Kienzl, N., Bitschnau, B., Schröttner, H. & Hochenauer, C., 19 Oct 2017, In : Energy & fuels. 31, 11

Research output: Contribution to journalArticleResearchpeer-review

Desulfurization
Adsorbents
Adsorption
Gases
Solid oxide fuel cells (SOFC)

Thermal loss analysis of hermetic compressors using numerical simulation

Posch, S., Hopfgartner, J. W., Dür, L. A., Eichinger, M., Stangl, S. & Almbauer, R., 22 Nov 2017, In : Applied Thermal Engineering. 130, p. 1580-1589 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Thermo-acoustic cross-talk between cans in a can-annular combustor

Farisco, F., Panek, L. & Kok, J., 2017, In : International Journal of Spray and Combustion Dynamics. 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Thermomechanical investigation of the production process of a creep resistant martensitic steel

Gsellmann, B., Halici, D., Krenmayr, B., Poletti, C. & Sonderegger, B., 16 Oct 2017, In : AIP Conference Proceedings. 1896, 160010

Research output: Contribution to journalArticleResearchpeer-review

steels
microstructure
recovery
thermomechanical treatment
creep strength

The roads ahead: Narratives for shared socioeconomic pathways describing world futures in the 21st century

O'Neill, B. C., Kriegler, E., Ebi, K. L., Kemp-Benedict, E., Riahi, K., Rothman, D. S., van Ruijven, B. J., van Vuuren, D. P., Birkmann, J., Kok, K., Levy, M. & Solecki, W., 1 Jan 2017, In : Global Environmental Change. 42, p. 169-180 12 p.

Research output: Contribution to journalArticleResearchpeer-review

twenty first century
climate effect
road
narrative
mitigation

Toughness evaluation of EB welds

Wiednig, C. A. & Enzinger, N., 15 Feb 2017, In : Welding in the world. 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Urban Mobility Analysis with Mobile Network Data: A Visual Analytics Approach

Senaratne, H., Müller, M., Behrisch, M., Lalanne, P., Bustos-Jimenez, J., Schneidewind, J., Keim, D. & Schreck, T., 2017, In : IEEE Transactions on Intelligent Transportation Systems.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Validation of Turbulence/Chemistry Interaction Models for use in Oxygen Enhanced Combustion

Prieler, R. J., Belohradsky, P., Mayr-Mittermüller, B., Rinner, A. & Hochenauer, C., 2017, In : Energy Procedia. 120, p. 548-555 8 p.

Research output: Contribution to journalArticleResearchpeer-review

VDI Studienpreis: Baukasten für effizienten Transport

Stöhr, T., May 2017, Logistik Heute .

Research output: Contribution to specialist publicationArticleResearch

Verbesserung der Flankenerfassung und der Nahtgeometrie in der Wurzellage einer MAG Schienenschweißung durch ein externes Magnetfeld

Schwald, M., Nov 2017, In : Schweiss- & Prüftechnik. 11/12, p. 196 202 p.

Research output: Contribution to journalArticleResearchpeer-review

Warum man in der Großmotorenforschung weiter Gas gibt

Wimmer, A., Jun 2017, TU Graz research Journal, 2017-1, 17, p. 23 - 25 3 p.

Research output: Contribution to specialist publicationArticleResearch

Wheel-rail creep force model for predicting water induced low adhesion phenomena

Trummer, G., Buckley-Johnstone, L. E., Voltr, P., Meierhofer, A., Lewis, R. & Six, K., 10 Jan 2017, In : Tribology international. 109, p. 409-415

Research output: Contribution to journalArticleResearchpeer-review

Wirtschaftlicher Vergleich des Elektronenstrahlschweißprozesses mit Metallaktivgas Schweißen und mögliche Betreibermodelle

Hofstätter, L., Enzinger, N., Friessnig, M. H. & Wiednig, C. A., Jan 2017, In : Schweiss- & Prüftechnik. 0102, p. 10-13

Research output: Contribution to journalArticleResearch

2016

+ERS - Plus Energy Network Reininghaus Süd: a pilot project towards an energy self-sufficient urban district

Staller, H., Rainer, E., Heimrath, R., Halmdienst, C. & Grabner, M., 2016, In : Energy and buildings. 115, p. 138-147

Research output: Contribution to journalArticleResearchpeer-review

Project management
Energy efficiency

Acid base interaction and its influence on the adsorption kinetics and selectivity order of aromatic sulfur heterocycles adsorbing on Ag-Al2O3

Neubauer, R., Husmann, S. M., Weinländer, C., Kienzl, N., Leitner, E. & Hochenauer, C., 21 Oct 2016, In : Chemical engineering journal. 309, p. 840 849 p.

Research output: Contribution to journalArticleResearchpeer-review

Sulfur
sulfur
adsorption
Adsorption
kinetics

A computationally inexpensive CFD approach for small-scale biomass burners equipped with enhanced air staging

Buchmayr, M., Gruber, J., Hargassner, M. & Hochenauer, C., 2016, In : Energy conversion and management. 115, p. 32-42

Research output: Contribution to journalArticleResearchpeer-review

Advanced Heat Transfer Analysis of Continuously Variable Transmissions (CVT)

Wurm, J., Fitl, M., Gumpesberger, M., Väisänen, E. & Hochenauer, C., 7 Dec 2016, In : Applied Thermal Engineering.

Research output: Contribution to journalArticleResearchpeer-review

Heat transfer
Pulleys
Temperature
Thermal load
Numerical models