Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Article
2018

Deep Hole Drilling of High Strength Steels with low Sulphur Content

Edler, J., 2018, (Submitted) In : Steel research international.

Research output: Contribution to journalArticleResearchpeer-review

Design and functionality of a segmented heat-storage prototype utilizing stable supercooling of sodium acetate trihydrate in a solar heating system

Englmair, G., Moser, C., Furbo, S., Dannemand, M. & Fan, J., 1 Jul 2018, In : Applied Energy. p. 522-534 13 p.

Research output: Contribution to journalArticleResearchpeer-review

supercooling
Supercooling
Solar heating
Heat storage
Phase change materials

DeSOx-Einfluss auf das Alterungsverhalten eines NOx-Speicherkatalysators

Maurer, M., Fortner, T., Holler, P. & Eichlseder, H., Mar 2018, In : Motortechnische Zeitschrift. 03/2018, p. 68-73 6 p.

Research output: Contribution to journalArticleResearch

Development and Validation of 3D-CFD Injection and Combustion Models for Dual Fuel Combustion in Diesel Ignited Large Gas Engines

Eder, L., Ban, M., Pirker, G., Vujanovic, M., Priesching, P. & Wimmer, A., 14 Mar 2018, In : Energies. 11, 3, 23 p., 643.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Development of a numerical approach based on coupled CFD/FEM analysis for virtual fire resistance tests—Part A: Thermal analysis of the gas phase combustion and different test specimen

Prieler, R. J., Mayrhofer, M., Eichhorn-Gruber, M., Schwabegger, G. & Hochenauer, C., 2018, In : Fire and materials. p. 1-17 17 p.

Research output: Contribution to journalArticleResearchpeer-review

Die Abgasgesetzgebung Euro 6d für Dieselmotoren

Schutting, E., Jun 2018, TU Graz research Journal, 2018-1, 19, p. 23 3 p.

Research output: Contribution to specialist publicationArticleResearch

Open Access

Diffusion Defining Atomic Scale Spinodal Decomposition within Nano-Precipitates

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C., Sonderegger, B. & Kothleitner, G., 2018, In : Nature Materials. 17, p. 1101-1107

Research output: Contribution to journalArticleResearchpeer-review

Digitalization and its influence on business model innovation

Rachinger, M., Rauter, R., Müller, C., Vorraber, W. & Eva, S., 29 Jun 2018, In : Journal of Manufacturing Technology Management.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Dislocation multiplication in stage II deformation of fcc multi-slip single crystals

Stricker, M., Sudmanns, M., Schulz, K., Hochrainer, T. & Weygand, D., 9 Jul 2018, In : Journal of the mechanics and physics of solids. 119, p. 319-333 15 p.

Research output: Contribution to journalArticleResearchpeer-review

District energy systems: Modelling paradigms and general-purpose tools

Schweiger, G., Heimrath, R., Falay, B., O'Donovan, K., Nageler, P., Pertschy, R., Engel, G., Streicher, W. & Leusbrock, I., 1 Dec 2018, In : Energy. p. 1326-1340

Research output: Contribution to journalArticleResearchpeer-review

Pipe
Feedback
Carbon
Industry

EFFECT OF FRICTION STIR PROCESSING ON CORROSION BEHAVIOR OF CAST AZ91C MAGNESIUM ALLOY

Hassani, B., Vallant, R., Karimzadeh, F., Enayati, M. H., Sabooni, S. & Pradeep, K., 5 Jul 2018, In : Surface review and letters.

Research output: Contribution to journalArticleResearchpeer-review

cast alloys
magnesium alloys
Magnesium alloys
corrosion
friction

Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels

Schneider, R., Steineder, K., Krizan, D. & Sommitsch, C., 30 Nov 2018, In : Materials Science and Technology (United Kingdom).

Research output: Contribution to journalArticleResearchpeer-review

Steel
heat treatment
Heat treatment
steels
mechanical properties

Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels

Pouriamanesh, R., Dehghani, K., Vallant, R. & Enzinger, N., Nov 2018, In : Journal of Materials Engineering and Performance. 27, 11, p. 6058-6068 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Submerged arc welding
Steel
Welds
Metals
Ferrite

Effizienzsteigerung der Verbrennungskraftmaschine durch verlängerte Expansion

Dumböck, O., Schutting, E., Eichlseder, H. & Hübner, W., 9 Nov 2018, In : Motortechnische Zeitschrift. 79, 12, p. 80-85

Research output: Contribution to journalArticleResearch

Elaboration and analysis of key figure-based approaches for the efficiency assessment of traditional and bio-inspired factory layouts

Hermann, M., Winkler, H. & Tinello, D., 2018, In : Procedia CIRP. 72, p. 732-738

Research output: Contribution to journalArticleResearchpeer-review

Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation

Preininger, M., Subotić, V., Stöckl, B., Schauperl, R., Reichholf, D., Megel, S., Kusnezoff, M. & Hochenauer, C., 1 Jun 2018, In : International Journal of Hydrogen Energy. 43, 27, p. 12398-12412 15 p.

Research output: Contribution to journalArticleResearchpeer-review

solid electrolytes
Electrolysis
Electrolytes
impedance
electrolysis

Electron beam welding of Copper using Plasma Spraying for filler metal deposition

Stummer, M., Stütz, M., Aumayr, A. & Enzinger, N., 1 Nov 2018, In : Welding in the world. 62, 6, p. 1341-1350 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron beam welding
Filler metals
Plasma spraying
Copper
Joining

Emissionskonzepte für Diesel-Pkw in Indien 2020

Ratzberger, R., Eichlseder, H. & Wieser, M., Sep 2018, In : Motortechnische Zeitschrift. p. 40 bis 45 6 p.

Research output: Contribution to journalArticleResearch

Open Access
visibility
safety
vegetation
modeling
parameter

Ermöglichung nachhaltiger Wärme- und Kältenetze durch Simulation und Visualisierung

Leusbrock, I., Schrammel, H., Mauthner, F., Heimrath, R. & Fink, C., Jan 2018, Nachhaltige Technologien - erneuerbare Energien und Ressourceneffizienz, 01, 2018, p. 7-9.

Research output: Contribution to specialist publicationArticleResearch

Evaluating health co-benefits of climate change mitigation in urban mobility

Wolkinger, B., Haas, W., Bachner, G., Weisz, U., Steininger, K., Hutter, H. P., Delcour, J., Griebler, R., Mittelbach, B., Maier, P. & Reifeltshammer, R., 1 May 2018, In : International Journal of Environmental Research and Public Health. 15, 5, 880.

Research output: Contribution to journalArticleResearchpeer-review

Climate Change
Insurance Benefits
Exercise
Administrative Personnel
Air

Evaluating the impact of optimization algorithms for patient transits dispatching using discrete event simulation

Furian, N., O'Sullivan, M., Walker, C. & Vössner, S., 1 Dec 2018, In : Operations Research for Health Care. 19, p. 134-155 22 p.

Research output: Contribution to journalArticleResearchpeer-review

Nurses
Volatilization
Critical Pathways
New Zealand
Health Services

Evaluation of drag models for particles and powders with non-uniform size and shape

Gerhardter, H., Prieler, R. J., Mayr-Mittermüller, B., Knoll, M., Mühlböck, M., Tomazic, P. & Hochenauer, C., 2018, In : Powder Technology. 330, p. 152-163

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of various means of transport for urban areas

Brunner, H., Hirz, M., Hirschberg, W. & Fallast, K., 7 Mar 2018, In : Energy, Sustainability and Society . 8, 11 p., 9.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Experimental Investigation of Boundary Layer Relaminarization in Accelerated Flow

Bader, P., Pschernig, M., Sanz, W., Woisetschläger, J., Heitmeir, F., Brenn, G. & Meile, W., 2018, In : Journal of Fluids Engineering. 140, 8, 15 p., 081201.

Research output: Contribution to journalArticleResearchpeer-review

Experiments and modelling of NOx precursors release (NH3 and HCN) in fixed-bed biomass combustion conditions

Anca-Couce, A., Sommersacher, P., Evic, N., Mehrabian, R. & Scharler, R., 15 Jun 2018, In : Fuel. 222, p. 529-537 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Biomass
Nitrogen
Experiments

Extended expansion linkage engine: a concept to increase the efficiency

Dumböck, O., Schutting, E. & Eichlseder, H., 18 May 2018, In : Automotive and Engine Technology. p. 84-92 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Fractional-order model identification for state of health assessment of solid-oxide fuel cells

Dolenc, B., Nusev, G., Subotić, V., Hochenauer, C., Gehring, N., Juricic, D. & Boskoski, P., 11 Oct 2018, In : IFAC-PapersOnLine. 51, 24, p. 849-854

Research output: Contribution to journalArticleResearchpeer-review

Friction stir welding of new electronic packaging materials SiCp/Al composite with T-joint

Gao, Z., Feng, J., Yang, H., Pakkanen, J. & Niu, J., 1 Jun 2018, In : Engineering Review. 38, 3, p. 352-359 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Friction stir welding
Electronics packaging
Packaging materials
Containers
Composite materials

Fundamentals of Force-Controlled Friction Riveting: Part 1 - Joint Formation and Heat Development

Pina Cipriano, G. F., Blaga, L. A., dos Santos, J. F., Vilaça, P. & T. Amancio-Filho, S., Nov 2018, In : Materials. 11, 11, 22 p., 2294.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Riveting
Rivets
Friction
Plastic deformation
Polyetherimides

Fundamentals of Force-Controlled Friction Riveting: Part II - Joint Global Mechanical Performance and Energy Efficiency

Pina Cipriano, G. F., Blaga, L. A., dos Santos, J. F., Vilaça, P. & T. Amancio-Filho, S., 2018, In : Materials.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Riveting
Energy efficiency
Friction
Polyetherimides
Forging

Genetic programming method for modelling of cup height in deep drawing process

Gusel, L., Boskovic, V., Domitner, J., Ficko, M. & Brezocnik, M., 2018, In : Advances in Production Engineering & Management. 13, 3, p. 358-365

Research output: Contribution to journalArticleResearchpeer-review

deep drawing
Deep drawing
Genetic programming
programming
punches

High temperature mechanical properties and microstructure of Ti–Nb–Zr–Ta–O biomedical alloy

Preisler, D., Stráský, J., Harcuba, P., Warchomicka, F. G. & Janeček, M., 1 Sep 2018, In : Acta Physica Polonica A. 134, 3, p. 636-639 4 p.

Research output: Contribution to journalArticleResearchpeer-review

mechanical properties
microstructure
theses
biocompatibility
high strength

Hydrogen-induced plasticity in nanoporous palladium

Gößler, M., Steyskal, E-M., Stütz, M., Enzinger, N. & Würschum, R., 2018, In : Beilstein Journal of Nanotechnology . 9, p. 3013 3024 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Impact of oxidizing honeycomb catalysts integrated in firewood stoves on emissions under real-life operating conditions

Reichert, G., Schmidl, C., Haslinger, W., Stressler, H., Sturmlechner, R., Schwabl, M., Wöhler, M. & Hochenauer, C., 1 Aug 2018, In : Fuel processing technology. 177, p. 109-118 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Stoves
Catalysts
Carbon Monoxide
Organic carbon
Catalyst selectivity

Implementing complex task allocation in a cytology lab via HCCM using Flexsim HC

Pongjetanapong, K., O'Sullivan, M., Walker, C. & Furian, N., 1 Aug 2018, In : Simulation modelling practice and theory. 86, p. 139-154 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Cytology
Hierarchical Control
Task Allocation
Conceptual Modeling
Conceptual Model

Improved conditioning of isogeometric analysis matrices for trimmed geometries

Marussig, B., Hiemstra, R. & Hughes, T. J. R., 2018, In : Computer Methods in Applied Mechanics and Engineering. 334, p. 79-110

Research output: Contribution to journalArticleResearchpeer-review

Improvement of the Wave Based Method for Thick Plate Vibrations

Klanner, M. & Ellermann, K., 17 Dec 2018, In : The International Journal of Acoustics and Vibration. 23, 4, p. 492-505 14 p.

Research output: Contribution to journalArticleResearchpeer-review

thick plates
Wave functions
wave functions
vibration
frequency ranges

Inclusive climate change mitigation and food security policy under 1.5C climate goal

Fujimori, S., Hasegawa, T., Rogelj, J., Su, X., Havlik, P., Krey, V., Takahashi, K. & Riahi, K., 6 Jul 2018, In : Environmental Research Letters. 13, 7, 074033.

Research output: Contribution to journalArticleResearchpeer-review

Nutrition Policy
Food Supply
Climate Change
food security
Climate

Induktionsschweißen von carbonfaserverstärktem Polyamid 66 im automobilen Karosseriebau

Forstner, T., Sommitsch, C. & Fischer, F., 28 Jun 2018, In : Zeitschrift Kunststofftechnik. 14, 4, p. 233-278

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence of inhomogeneity on several length scales on the local mechanical properties in V-alloyed all-weld metal

Haslberger, P., Ernst, W., Schneider, C., Holly, S. & Schnitzer, R., 1 Nov 2018, In : Welding in the world. 62, 6, p. 1153-1158 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Vanadium
Welds
Metals
Mechanical properties
Welding

Influence of microstructural parameters of indefinite chill alloys on flexural strength and Young's modulus

Paar, A., Schneider, R. & Sommitsch, C., 2018, In : Materials Testing. 60, 3, p. 239-244

Research output: Contribution to journalArticleResearchpeer-review

Graphite
Bending strength
Elastic moduli
Carbides
Strip mills

Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting

Koutny, D., Palousek, D., Pantelejev, L., Höller, C., Pichler, R., Tesicky, L. & Kaiser, J., 14 Feb 2018, In : Materials. 11, 2, 18 p., 298.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Influence of Thermal History on the Hot Ductility of a Continuously Cast Low Alloyed Cr-Mo Steel

Hoflehner, C., Sommitsch, C., Beal, C., Six, J. & Ilie, S., 29 Aug 2018, In : Journal of Materials Engineering and Performance. 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steel
Ductility
Solidification
Straightening
Continuous casting

Innovative Wärmepumpensysteme zur hocheffizienten Bereitstellung von Wärme

Rieberer, R., 2018, TU Graz research, 2018, 1.

Research output: Contribution to specialist publicationArticleResearch

Instability of dislocation fluxes in a single slip: Deterministic and stochastic models of dislocation patterning

Wu, R., Tüzes, D., Ispánovity, P. D., Groma, I., Hochrainer, T. & Zaiser, M., 24 Aug 2018, In : Physical Review / B. 98, 5, 054110.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Stochastic models
slip
Fluxes
Hydrodynamics
Linear stability analysis

Interaction of consumer preferences and climate policies in the global transition to low-carbon vehicles

McCollum, D. L., Wilson, C., Bevione, M., Carrara, S., Edelenbosch, O. Y., Emmerling, J., Guivarch, C., Karkatsoulis, P., Keppo, I., Krey, V., Lin, Z., Broin, E., Paroussos, L., Pettifor, H., Ramea, K., Riahi, K., Sano, F., Rodriguez, B. S. & van Vuuren, D. P., 1 Aug 2018, In : Nature Energy. 3, 8, p. 664-673 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Carbon
Environmental technology
Gas emissions
Greenhouse gases
Hydrogen

Investigation of NH3 Influence on Adsorptive H2S Removal from Biogas for Solid Oxide Fuel Cell Application

Weinländer, C., Neubauer, R., Hauth, M., Schröttner, H. & Hochenauer, C., 2018, In : Chemie-Ingenieur-Technik. 90, 7, p. 937-946

Research output: Contribution to journalArticleResearchpeer-review