Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Poster
2016

The generalization of visual flight skills across a variety of cockpit designs and flight dynamic models

Koglbauer, I. V., Riesel, M. & Braunstingl, R., 18 May 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Umsetzung nachhaltigen Bauens durch optimierte Projektsteuerungsprozesse und integrale Gebäudehüllen (UNAB) – AP1

Kreiner, H., Scherz, M., Wall, J., Mach, T., Schober, H. & Passer, A., 16 Jun 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Umsetzung nachhaltigen Bauens durch optimierte Projektsteuerungsprozesse und integrale Gebäudehüllen (UNAB) – AP2

Schober, H., Brandl, D., Zellinger, M., Mach, T., Boskovic, V., Banozic, M., Stavric, M. & Englhardt, O., 16 Jun 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Validierung Computertomografie-Reinheitsgradmessung mittels automatisierter Lichtmikroskopie

Decker, C., Schützenhöfer, W., Plank, B., Plesiutschnig, E. & Sommitsch, C., 10 May 2016.

Research output: Contribution to conferencePosterResearch

2017

Adsorption mechanisms of sulfur heterocycles and the influence on the adsorption kinetics of Ag-Al2O3

Neubauer, R., Weinländer, C., Kienzl, N. & Hochenauer, C., Mar 2017.

Research output: Contribution to conferencePosterResearch

Analysis and Characterization of spray coating related nano-particle exposures

Uhrner, U., Ye, Q., Nöst, T., Tiedje, O. & Sturm, P-J., 30 Aug 2017.

Research output: Contribution to conferencePosterResearchpeer-review

File

A road map towards modeling of particle stimulated nucleation using CADD

Wurm, P. & Ulz, M. H., 25 Sep 2017, (Accepted/In press).

Research output: Contribution to conferencePosterResearch

Corporate Makerspaces - Roles, Effects and Success Factors

Böhm, T., 15 May 2017.

Research output: Contribution to conferencePosterResearch

Development of a highly efficient, compact size, micro-CHP plant for the use of various biomass fuels and operational experience

Buchmayr, M., Gruber, J., Hargassner, M. & Hochenauer, C., Aug 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Development of an Innovative Low-Cost/Low-Emission Pellet-Based Stove Technology

Gruber, T., Mehrabian Bardar, R., SHIEHNEJADHESAR, A., Bauer, T., Anca-Couce, A. & Scharler, R., 2017.

Research output: Contribution to conferencePosterResearch

Drop impacts onto assemblies of mobile and fixed particles

Planchette, C., Lorenceau, E. & Binace, A-L., 17 Jul 2017.

Research output: Contribution to conferencePosterResearchpeer-review

EAGLE – Innovatice technical solution for automated parcel unloading

Landschützer, C., Wolfschluckner, A. & Fritz, M., 4 Jul 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Einsatz von OPC UA zur Optimierung der Prozessregelung in der Schleifbearbeitung

Steffan, M. & Haas, F., 1 Feb 2017.

Research output: Contribution to conferencePosterResearch

File

EnergySimCity - A Modular Toolbox for the Planning of Urban Energy Supply Concepts

Mach, T., Leusbrock, I., Fink, C., Schweiger, G., Nageler, P. J., Heimrath, R., Brandl, D. & Schranzhofer, H., 12 Sep 2017.

Research output: Contribution to conferencePosterResearch

EnergySimCity - Modulare Toolbox zur Planung urbaner Energieversorgungskonzepte

Mach, T., Fink, C., Nageler, P., Heimrath, R., Leusbrock, I., Schweiger, G., Brandl, D., Schranzhofer, H., Schrammel, H. & Fluch, J., May 2017.

Research output: Contribution to conferencePosterResearch

Ermittlung von Materialparameter für Umformverfahren

Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Joining of steel and aluminium sheets by CMT process using a local zinc coating

Fritsch, S. & Stummer, M., 24 Jan 2017.

Research output: Contribution to conferencePosterResearch

Multi-Objective Synthesis of NFC-Transponder Systems based on PEEC Method

Bauernfeind, T., Baumgartner, P., Biro, O., Hackl, A., Magele, C., Renhart, W. & Torchio, R., 19 Jun 2017.

Research output: Contribution to conferencePosterResearchpeer-review

PoRIS – Potentiale transnationaler River Information Services zur Gewährleistung der öffentlichen Sicherheit und Reduktion von Belastung für die Schifffahrt

Vorraber, W., Brugger, J. B., Schöggl, F., Lichtenegger, G. C., Vössner, S., Reindl-Krauskopf, S., Salimi, F., Kaplans, M., Strondl, R., Terlecki, A., Bierbaumer, R., Harnisch, C., Wegscheider, H-P., Sattler, M., Simon, S. & Kaufmann, M., 7 Nov 2017.

Research output: Contribution to conferencePosterResearch

Possibilities for the joining mechanism of a modular Physical Internet handling container

Ehrentraut, F. & Roth, S., 4 Jul 2017, p. 217.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
Joining
Containers
Internet
Pallets
CAD
Open Access
File
File

Protection of goods inside PI-handling container

Ehrentraut, F. & Reinmüller, K., 4 Jul 2017, p. 218.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
Containers
Internet
manipulation
flexibility
efficiency

Requirements for a web-based cargo management tool to enable coopetition

Gasperlmair, A., Graf, H-C., Hörtenhuber, S-T. & Landschützer, C., 4 Jul 2017.

Research output: Contribution to conferencePosterResearch

Rotary Friction Welding of Molybdenum Components

Stütz, M., Pixner, F., Wagner, J., Reheis, NI., Raiser, E., Kestler, H. & Enzinger, N., 30 May 2017.

Research output: Contribution to conferencePosterResearch

Thermo-mechanical Damage Models of Quenched and Tempered Carbon Steel for Railway Wheels

Enzinger, N. & Maier, K., May 2017.

Research output: Contribution to conferencePosterResearch

Carbon steel
Wheels
Brakes
Residual stresses
Temperature

Ultraschallunterstütztes Bearbeiten von Hartmetall-Bauteilen (HB30F)

Zopf, P. & Haas, F., 1 Feb 2017.

Research output: Contribution to conferencePosterResearch

File

Validation of Turbulence/Chemistry Interaction Models for use in Oxygen Enhanced Combustion

Prieler, R. J., Belohradsky, P., Mayr, B., Rinner, A. & Hochenauer, C., 19 Apr 2017.

Research output: Contribution to conferencePosterResearch

2018

Acoustic, Aerodynamic and Aeroelastic Comparison of Different Low Pressure Turbine Exit Guide Vane Designs

Zenz, M., Simonassi, L., Selic, T., Schönleitner, F., Heitmeir, F. & Marn, A., 13 Jun 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Aluminiumpaneele für thermisch aktive Gebäudefassaden

Eckhard, R., Auer, P., Stern, T., Schober, H., Brandl, D. & Domitner, J., 2018.

Research output: Contribution to conferencePosterResearch

Characterization of spray aerosols generated from particle-free solutions and nano-particle containing suspensions (NANOaers)

Bergelt, P., Hillemann, L., Bierkandt, F., Wagener, S., Tentschert, J., Visileanu, E., Hinterbichler, H., Steiner, H., Brenn, G., Goni de Cerio, F., Brain, J. D. & Stintz, M., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Dezentrale Gebäudekühlung über fassadenintegrierte Photovoltaik: COOLSKIN

Heinz, A., Mach, T., Brandl, D., Eckschlager, F. A., Rennhofer, M., Selke, T. & Schlager, T., 14 Jun 2018.

Research output: Contribution to conferencePosterResearch

Drehzahlsynchron-Schleifprozess: Auftretende Prozesskräfte beim Schruppschleifen

Spenger, T., Steffan, M. & Haas, F., 23 Jan 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Drehzahlsynchron-Schleifprozess: Erreichbare Oberflächenqualitäten beim Schlichtschleifen

Steffan, M., Haas, F. & Spenger, T., 15 May 2018, p. 1. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

E-Achse 2030: „Design for Manufacturing“ im Kontext von I4.0

Brillinger, M. & Haas, F., 21 Jun 2018.

Research output: Contribution to conferencePosterResearch

Ein dezentrales photovoltaisches Versorgungssystem für erneuerbare Kühlung Im Jahresbetrieb: COOLSKIN

Rennhofer, M., Schlager, T., Selke, T., Heinz, A., Brandl, D., Zimmerberger, S. & Mach, T., 2018.

Research output: Contribution to conferencePosterResearch

Electrochemical characterisation of an rSOC stack under electrolysis of carbon dioxide

Preininger, M., Subotić, V., Stöckl, B., Schauperl, R., Megel, S. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Electron beam welding of wear-resistant steels

Schneider, C., Ernst, W., Vallant, R. & Enzinger, N., 12 Jul 2018.

Research output: Contribution to conferencePosterResearch

Elektromobilität mit Brennstoffzellen- Potenzial und Beispiele

Trattner, A. & Klell, M., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Experimentelle Untersuchung und statistische Analyse wesentlicher Prozessparameter beim Stanznieten von 6xxx Aluminiumblechen

Hönsch, F., Domitner, J., Sommitsch, C. & Götzinger, B., 2018.

Research output: Contribution to conferencePosterResearch

Force-Controlled Friction Riveting - A Hybrid Joining Process

Pina Cipriano, G. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Joining
Friction
Aluminum

Identification of disturbances in SOFC operation and prediction of cell degradation

Subotić, V., Juricic, D., Stöckl, B., Preininger, M., Boskoski, P., Dolenc, B., Nusev, G., Menzler, N. H., Schröttner, H. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Improving the Representation of Flow by Local-Regional Scale Model Coupling

Uhrner, U., Steiner, M. & Reifeltshammer, R. J., 13 Apr 2018, p. 1-1.

Research output: Contribution to conferencePosterResearchpeer-review

Large planar SOFC-MEA operation with ammonia: Experimental analysis and performance evaluation

Stöckl, B., Subotić, V., Preininger, M., Schwaiger, M., Klopcic, N., Schröttner, H. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Material Handling Systems for Physical Internet Hubs: Evaluation and readiness of present Material Handling Systems for the Physical Internet

Ehrentraut, F. & Gabernig, H., 18 Jun 2018.

Research output: Contribution to conferencePosterResearchpeer-review

File
Materials handling
Internet
present
evaluation
Logistics

Modelling Material Flow in Friction Riveting of Polymeric Materials

Pina Cipriano, G. F., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Friction
Polymers
Plastic deformation