Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2019

Filter
Poster
2010

Gasqualität bei der Methanierung von Synthesegas aus der allothermen Kohlevergasung

Baumhakl, C., 2010.

Research output: Contribution to conferencePosterResearch

Gender diversity in usability and acceptance of cockpit automation

Koglbauer, I., Braunstingl, R., Fruehwirth, K., Grubmueller, E. & Lösch, S., 2010.

Research output: Contribution to conferencePosterResearch

Hot Cracking by welding and Casting

Djuric, D., Hadzic, S. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Impact of an environmental zone on transport emissions in the city of Graz

Rexeis, M., Röschel, G. & Hausberger, S., 2010.

Research output: Contribution to conferencePosterResearch

Kinetics of AlN Precipitation in the Ferrite Region of Microalloyed (HSLA) Steels

Radis, R. & Kozeschnik, E., 2010.

Research output: Contribution to conferencePosterResearch

Low Temperature Solar Thermal Domestic Hot Water Potential of Croatia's Island and Coastal Regions

Pichler, M., Fucak, S. & Frankovic, B., 2010.

Research output: Contribution to conferencePosterResearch

Open Access
File

Merge problems with high speed sorters

Jodin, D. & Wolfschluckner, A., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of Beta Grain Coarsening in Ti-6Al-4V during Isothermal Heat Treatment

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of diffusional creep in polycrystals - Poster

Pein, C. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Neues Messinstrument zur Analyse und Überwachung von Zerspanungsprozessen

Haas, F. & Blaha, J., 2010.

Research output: Contribution to conferencePosterResearch

On Modelling the Microstructure Evolution of a Ferritic Hot-Work Tool Steel during Short-Term Creep

Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

"product innovation project" an der TU Graz

Fallast, M. & Oberschmid, H., 2010.

Research output: Contribution to conferencePosterResearch

Simulation potentialities for a reciprocating compressor

Landschützer, C. & Wolfschluckner, A., 2010.

Research output: Contribution to conferencePosterResearch

The floating water bridge in oscillating electric fields

Wexler, A. D., Fuchs, E. C., Bruning, J. & Woisetschläger, J., 2010.

Research output: Contribution to conferencePosterResearch

The potential of parametric design methods in automotive door development

Hirz, M., Harrich, A., Mayr, J. & Haselwanter, A., 2010.

Research output: Contribution to conferencePosterResearch

Transmission Electron Microscopy Investigations of a 12 wt.% Martensitic Cr Steel Designed for High Temperature Service

Mendez Martin, F., Albu, M., Sonderegger, B., Mayr, P. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Verbinden von Li-Ionen Zellen für Automotive Batteriepakete

Mucic, K., 2010.

Research output: Contribution to conferencePosterResearch

Zu "Ausbildungslandschaft, Berufsbild, Karriereweg und Qualifikationsprofil von Wirtschaftsingenieuren"

Bauer, U., Fürst, A. & Zunk, B. M., 2010.

Research output: Contribution to conferencePosterResearch

Open Access
File
2009

Cellular automaton modelling of grain growth during annealing of alloy Fe-19Cr-8Ni

Candic, M., 2009.

Research output: Contribution to conferencePosterResearch

Comprehensive TEM studies on Cr -rich martensitic steels

Albu, M., Mendez Martin, F., Mayr, P. & Kothleitner, G., 2009.

Research output: Contribution to conferencePosterResearch

Development of WC based tools for FSSW of steel

Weinberger, T. & Kolbeck, C., 2009.

Research output: Contribution to conferencePosterResearch

Experimentelle Untersuchungen zur Belastungsgrenze humaner Rippen

Darok, M., Tomasch, E., Dimai, H-P., Kirschbichler, S. & Patsch, J., 2009.

Research output: Contribution to conferencePosterResearch

Feasibility study of alternative absorption heat pumping processes

Kotenko, O., Moser, H. & Rieberer, R., 2009.

Research output: Contribution to conferencePosterResearch

Grain-subgrain structure analyses of hot deformed superalloy Allvac 718plusTM by EBSD

Mitsche, S., Sommitsch, C., Huber, D., Pölt, P. & Stockinger, M., 2009.

Research output: Contribution to conferencePosterResearch

Instabilität flüssiger Filamente in flüssiger, viskoser Umgebung

Brenn, G., 2009.

Research output: Contribution to conferencePosterResearch

Open Access
File

Konzentrationsprofile in trocknenden zylindrischen Filamenten

Czaputa, K., Brenn, G. & Meile, W., 2009.

Research output: Contribution to conferencePosterResearch

METHANATION WITH AN ALLOTHERMAL SMART LAB-SCALE GASIFICATION SYSTEM

Kienberger, T., 2009.

Research output: Contribution to conferencePosterResearch

Microstructure evaluation of 12% Cr steel using TEM technique

Mendez Martin, F., Albu, M., Sonderegger, B. & Sommitsch, C., 2009.

Research output: Contribution to conferencePosterResearch

Online-Teeranalyse auf dem Prinzip der Fluoreszenzspektroskopie

Baumhakl, C., 2009.

Research output: Contribution to conferencePosterResearch

Psychophysiological evaluation of simulator training effects during real flight tests

Koglbauer, I., Kallus, K. W., Braunstingl, R. & Boucsein, W., 2009.

Research output: Contribution to conferencePosterResearch

Research activities in the area of Friction Stir Welding and Processing

Weinberger, T., Khosa, S. U. & Enzinger, N., 2009.

Research output: Contribution to conferencePosterResearch

Simulation of Concurrent AlN and VN Precipitation during Thermal Treatment of Microalloyed Steels

Radis, R. & Kozeschnik, E., 2009.

Research output: Contribution to conferencePosterResearch

TEM investigations of the precipitation kinetics of Mn(Cu)S and AlN in microalloyed steel

Schwarz, S., Radis, R., Kozeschnik, E. & Rumplmair, G., 2009.

Research output: Contribution to conferencePosterResearch

The dynamics of gas bubbles below and above the rise velocity jump discontinuity in viscoelastic polymer solutions

Pilz, C. & Brenn, G., 2009.

Research output: Contribution to conferencePosterResearch

Volatile nanoparticle formation and growth within a diluting diesel car exhaust

Uhrner, U., von Löwis, S., Wehner, B. & Zallinger, M. S., 2009.

Research output: Contribution to conferencePosterResearch

2008

3D multiphase CFD simulation of PEM fuel cells and experimental validation

Fink, C., Parz, P., Hacker, V., Brenn, G. & Prenninger, P., 2008.

Research output: Contribution to conferencePosterResearch

Alternative, hochvakuumdichte Lötverbindungstechniken für H2- führende Rohrleitungssysteme für Temperaturbedingugen bis -253 °C

Hofmeister, F., Vallant, R. & Basalka, H., 2008.

Research output: Contribution to conferencePosterResearch

Open Access
File

A New Side Impact Sled Test Rig at Magna Steyr for Validation of Virtual Side Impact Development

Eichberger, A., Wörgötter, F., Haberkorn, G. & Fellner, B., 2008.

Research output: Contribution to conferencePosterResearch

B.1: Thermisches Fügen von Stahl mit Aluminium im Karosseriebau

Pasic, H., Weirather, T., Vallant, R., Bruckner, J., Ivanova, J., Liedl, G., Hampel, S. & Baumgartner, S., 2008.

Research output: Contribution to conferencePosterResearch

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sommitsch, C., Ebner, T., Sherstnev, P. & Hacksteiner, M., 2008.

Research output: Contribution to conferencePosterResearch

Development of WC based tools for Friction Stir Spot Welding (FSSW) of steel

Weinberger, T. & Kolbeck, C., 2008.

Research output: Contribution to conferencePosterResearch

EELS quantification of complex nitrides in a 12 % Cr steel

Albu, M., Mendez Martin, F. & Kothleitner, G., 2008.

Research output: Contribution to conferencePosterResearch

Eine explorative Studie zum Effekt der roboterunterstützten Rehabilitation der Hand nach Schlaganfall auf kortikale und subkortikale Repräsentanzen der Handbewegung

Pargfrieder, C., Pegritz, S., Grieshofer, P., Wurm, W., Linderl-Madrutter, R., Reiter, G., Scherer, R., Kollreider, A., Ram, D., Ropele, S., Loidfelder, M., Neuper, C., Fazekas, F. & Enzinger, C., 2008.

Research output: Contribution to conferencePosterResearch

Entwicklung und Untersuchung neuer KSP Systeme für die Automobilindustrie

Ernst, W., Saberi, S., Rauch, R., Schwamb, M., Khelfallah, N., Vallant, R., Stellnberger, K-H. & Schabl, G., 2008.

Research output: Contribution to conferencePosterResearch

Entwicklung und Untersuchung neuer KSP-Systeme für die Automobilindustrie

Ernst, W., Saberi, S., Vallant, R., Rauch, R., Stellnberger, K-H., Schwamb, M., Khelfallah, N., Schabl, G. & Braendli, C., 2008.

Research output: Contribution to conferencePosterResearch

Evaluation of Bone Mineral Density in Human Ribs

Darok, M., Dimai, H-P., Kirschbichler, S. & Tomasch, E., 2008.

Research output: Contribution to conferencePosterResearch

Evolution of Size and Morphology of gamma' Precipitates in Udimet 720 Li during Continuous Cooling

Radis, R., Schaffer, M., Albu, M., Kothleitner, G., Pölt, P. & Kozeschnik, E., 2008.

Research output: Contribution to conferencePosterResearch

Experiments with the Floating Water Bridge

Fuchs, E. C., Gatterer, K. & Woisetschläger, J., 2008.

Research output: Contribution to conferencePosterResearch