Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Poster
2014

Influence of nickel on the mechanical properties of a creep resistant CB2 flux cored wire weld metal

Baumgartner, S., Schuler, M., Schnitzer, R. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Inter-regional Air Quality Assessment – bridging the gap between regional and kerbside PM

Uhrner, U., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Investigation of friction behavior in modern combustion engines

Wagner, A., Grabner, P., Eichlseder, H. & Wichtl, R., 2014.

Research output: Contribution to conferencePosterResearch

Investigation on Noise Generation and Propagation for Different Vane-Vane Positions in a Two-Stage Two-Spool Test Turbine

Bauinger, S., Faustmann, C. & Heitmeir, F., 2014.

Research output: Contribution to conferencePosterResearchpeer-review

Know-how and process development for components used in (A)USC power plants

Lochbichler, C., Füreder-Kitzmüller, F., Zeiler, G., Paul, S., Klarner, J., Vogl, T., Baumgartner, S., Schnitzer, R., Hanus, R., Schmitz-Niederau, M., Kreuzer-Zagar, D., Schrammhauser, S., Trenkmann, U., Schuler, M. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

LeanLab - Hands-on training in the Learning Factory

Kleindienst, M., 2014.

Research output: Contribution to conferencePosterResearch

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePosterResearch

Numerical investigation regarding contact modeling for evaluating the modal characteristics of a low pressure turbine rotor

Justl, M., Traußnig, L. M., Schönleitner, F., Marn, A. & Heitmeir, F., 2014.

Research output: Contribution to conferencePosterResearch

Product Innovation Project - Development of working prototypes

Pointner, A., 2014.

Research output: Contribution to conferencePosterResearch

Production technology requirements with respect to agile manufacturing

Friessnig, M. H. & Oswald, P., 2014.

Research output: Contribution to conferencePosterResearch

Ramp-Up Management in Automotive Industry - Time-to-market oriented

Pointner, A., 2014.

Research output: Contribution to conferencePosterResearch

SafeEV: Current and planned activities

Teibinger, A., Mayer, C., Puppini, R., Svensson, M., Willinger, R., Nuß, F., Luttenberger, P. & D'Addetta, G. A., 2014.

Research output: Contribution to conferencePosterResearch

Schleifprozessuntersuchung zur Energie- und Ressourcenoptimierung beim Werkzeugschleifen

Edler, J., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Simulation of microstructure and modelling of mechanical properties of CB2 flux cored wires weld metal

Schuler, M., Ramskogler, C., Baumgartner, S., Schnitzer, R. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Small-Scale, Big Impact – Utilities’ New Business Models for “Energiewende”

Marko, W. A., 2014.

Research output: Contribution to conferencePosterResearch

SOLAR AND HEAT PUMP SYSTEMS - SUMMARY OF SIMULATION RESULTS OF THE IEA SHC TASK 44/HPP ANNEX 38

Haller, M., Carbonell, D., Winteler, C., Bertram, E., Bunea, M., Lerch, W. & Ochs, F., 2014.

Research output: Contribution to conferencePosterResearch

Sparkling Scooter

Böhm, T., 2014.

Research output: Contribution to conferencePosterResearch

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface Structuring of Biomaterials by Electron Beam Technique

Stütz, M., Warchomicka, F. G., Ramskogler, C., Poletti, M. C. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Systematic Materials Selection for Warehouse Shuttle Vehicles

Aigner, M., Caliskanoglu, O. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Teaching energy efficiency hands on in the learning factory

Kleindienst, M., 2014.

Research output: Contribution to conferencePosterResearch

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2014.

Research output: Contribution to conferencePosterResearch

Understanding the primary and secondary pyrolysis mechanisms of cellulose, lignin and wood with laser-induced fluorescence

Dieguez-Alonso, A., Anca-Couce, A. & Behrendt, F., 2014.

Research output: Contribution to conferencePosterResearch

Variable Aufbaugeometrie für Nutzfahrzeuge (TruckAero)

Fabian, J. & Stadler, S., 2014.

Research output: Contribution to conferencePosterResearch

Werkstoffwahl für einen Rohrbündelwärmetauscher mittels CES

Kandutsch, P. G., Brillinger, M., Dobretsberger, J., Reiner, C. W. & Poletti, M. C., 2014.

Research output: Contribution to conferencePosterResearch

"WING - Studie 2014": Ausbildungslandschaft, Kompetenzprofil und Karriereweg von WirtschaftsingenieurInnen

Bauer, U., Sadei, C., Soos, J. & Zunk, B. M., 2014.

Research output: Contribution to conferencePosterResearch

World Class Logistics in Operations

Friessnig, M. H. & Stock, M., 2014.

Research output: Contribution to conferencePosterResearch

2013

A set of physical and chemical properties for biochar characterization in terms of soil application

Dieguez-Alonso, A., Anca-Couce, A., Garcia-Rueda, A., Zobel, N. & Behrendt, F., 2013.

Research output: Contribution to conferencePosterResearchpeer-review

Assessing the Surface Cracking Susceptibility during Continuous Casting of in-situ Melted and Solidified Steels

Caliskanoglu, O., Ilie, S., Beal, C. & Sommitsch, C., 2013.

Research output: Contribution to conferencePosterResearch

Business Modellierung und Simulation

Neubacher, D., 2013.

Research output: Contribution to conferencePosterResearch

Calculation of Evaporation Rate in Drying Section of Fixed-Bed Gasifiers

Jalili, M., Anca-Couce, A., Zobel, N. & Behrendt, F., 2013.

Research output: Contribution to conferencePosterResearchpeer-review

Customers’ Motivation to Cooperate with Suppliers in Business-to-Business Relationships

Koch, V. & Zunk, B. M., 2013.

Research output: Contribution to conferencePosterResearch

Development of an electrical method for including mesoscale state transitions in polar liquids

Wexler, A. D., Drusova, S., Fuchs, E. C. & Woisetschläger, J., 2013.

Research output: Contribution to conferencePosterResearch

Die Lernfabrik - Hands-on Training in der Fabrik im Hörsaal

Kleindienst, M., 2013.

Research output: Contribution to conferencePosterResearch

Dual Fuel Concepts for Mobile Application

Grabner, P. & Eichlseder, H., 2013.

Research output: Contribution to conferencePosterResearch

Elektronenstrahlschweißen dickwandiger Gussbauteile aus CB2 und Alloy 625

Wiednig, C. A., Enzinger, N., Beal, C. & Lochbichler, C., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

E-Mobility as System Innovation - Oppertunity for different industries?

Pointner, A., 2013.

Research output: Contribution to conferencePosterResearch

E-procurement Usage in the Construction Industry: Adoption Rate, Benefits and Barriers

Marchner, M. & Zunk, B. M., 2013.

Research output: Contribution to conferencePosterResearch

Evaluation of combined solar thermal heat pump systems using dynamic system simulations

Lerch, W., Heinz, A. & Heimrath, R., 2013.

Research output: Contribution to conferencePosterResearch

Factors to Predict Collaboration in “Student-University-Industry – Triads”: Findings from Austria

Zunk, B. M., Manninger, M., Kerschenbauer, J. & Bauer, U., 2013.

Research output: Contribution to conferencePosterResearch

Flexibility of Business Models

Müller, C., 2013.

Research output: Contribution to conferencePosterResearch

Holistic management control approach for post- incubation support of high- technology start- ups

Kerschenbauer, J. & Bauer, U., 2013.

Research output: Contribution to conferencePosterResearch

How to explain the motivation in collaborations between students, university representatives and industry partners?

Reinisch, M., Zunk, B. M., Kerschenbauer, J. & Manninger, M., 2013.

Research output: Contribution to conferencePosterResearch

How to implement product lifecycle management tools successfully? Top 10 human factors and their managerial implications

Soos, J., Uitz, I. & Zunk, B. M., 2013.

Research output: Contribution to conferencePosterResearch

Innovationsfähigkeit und organisationale Ambidexterität – Empirische Untersuchung der Photovoltaik-Industrie

Marko, W. A., 2013.

Research output: Contribution to conferencePosterResearch

Investigation of a Standard Lawn Mower Engine in Real World Operation

Edtmayer, H., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

IT-Systemarchitektur und IT-Service Design

Vorraber, W. & Lichtenegger, G. C., 2013.

Research output: Contribution to conferencePosterResearch

Kleben von Schneidkeramik-Sägezähnen auf ein Stahlsägeblatt / Grundlagenuntersuchungen und Potential

Moser, F., Vallant, R. & Hampel, S., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Knowledge-based Engineering zur Grobplanung und Gestaltung automatisierter Hochregallager

Ortner-Pichler, A., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Lichtbogenspritzen von Metallschichten für den Verschleiß- und Korrosionsschutz

Jesse, M., Schröttner, H. & Vallant, R., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File