Faculty of Mechanical Engineering and Economic Sciences (3000)

  • 8010

    Inffeldgasse 23 Graz

    Austria

Research Output 1949 2020

Filter
Conference contribution
2018

Threat and Error Management Revisited

Koglbauer, I. V., 2018, The European Proceedings of Social & Behavioural Sciences . p. 655-662

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Tyre Type Dependent Transient Force Behaviour by Means of a Maxwell Model

Hackl, A., Hirschberg, W., Lex, C. & Rill, G., 2018, Dynamics of Vehicles on Roads and Tracks: Proceedings of the 25th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2017). London: CRC Press, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Über die Möglichkeiten zur Optimierung der Energieeffizienz von Stückgutstetigförderer: Energieeffizienzrechner für Antriebssysteme

Stöhr, T. & Hafner, N., 2018, Energiebedarf und Effizienz in der Intralogistik: Logistikwerkstatt Graz 2018, 24.-25. Mai 2018. Landschützer, C. & Schedler, M. (eds.). Graz: Verlag der Technischen Universität Graz, p. 79-96 (Logistik Werkstatt Graz).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Untersuchung der mechanischen Materialeigenschaften in der Wärmeeinflusszone geschweißter EN AW-6063-Bleche

Silvayeh, Z., Götzinger, B., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Tagungsband der 10. Ranshofener Leichtmetalltage: Hochleistungsmetalle und Prozesse für den Leichtbau der Zukunft. Kraly, A., Chimani, C. & Uggowitzer, P. (eds.). p. 198-209

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Utilization of Test Regions Worldwide for ADAS Validation

Dietl, P., Bernsteiner, S., Tschabuschnig, K., Alber, F. & Payerl, C., 2018, 20. VDA Technischer Kongress 2018: 20th VDA Technical Congress 2018. Berlin, p. 150-159

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Sensors
Engineers
Industry

Ventilation Control in Complex Road Tunels

Sturm, P-J. & Brandt, R., 25 Oct 2018, Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Young Driver Crashes in Austria: Analysis of Causes and Contributing Factors Based on In-Depth and Police Reported Crash Data

Winkelbauer, M. & Tomasch, E., 2018, 8th International Conference "ESAR - Expert Symposium on Accident Research".

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2017

3D-CFD simulation of dual fuel combustion in a diesel ignited gas engine

Eder, L., Kiesling, C., Pirker, G., Priesching, P. & Wimmer, A., Apr 2017, IMEM 2017. 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

4th International Physical Internet Conference, summary and key findings.

Landschützer, C., 14 Sep 2017, Tagungsband Internationaler Leobener Logistiksommer 2017. Leoben, 44 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A Comprehensive Methodology for the Development of Dual Fuel Combustion Concepts for Marine Applications

Malin, M., Eder, L., Pirker, G., Redtenbacher, C., Wimmer, A., Tsuru, D. & Takasaki, K., 2017, ISME Tokyo - International Symposium on Marine Engineering.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Alternative Methods for Determining Microcleanliness: A Study Based on Hot Work Tool Steels

Schützenhöfer, W., Decker, C., Plank, B. & Plesiutschnig, E., 2017, Proceedings: 20th International Forgemasters Meeting - IFM 2017. p. 1008-1017 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Tool steel
Optical microscopy
Furnaces
Tomography
X rays

A Metric for Evaluating Residual Complexity in Software

Krisper, M., Kreiner, C. J., Iber, J. & Quaritsch, M., 2017, 24th European Conference on Systems, Software and Services Process Improvement.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Metric for Evaluating Residual Complexity in Software

Krisper, M., Kreiner, C. J., Iber, J. & Quaritsch, M., 12 Aug 2017, Systems, Software and Services Process Improvement. Stolfa, J., Stolfa, S., O'Connor, R. V. & Messnarz, R. (eds.). Cham: Springer International Publishing AG , p. 138-149 12 p. 10.1007/978-3-319-64218-5_11. (Communications in Computer and Information Science; vol. 748).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application programs

Anforderungen an die Diesel-Piloteinspritzung in Diesel-Gas Dual Fuel Motoren zur Erzielung höchster Wirkungsgrade bei niedrigsten Emissionen

Redtenbacher, C., Malin, M., Kiesling, C. & Wimmer, A., Apr 2017, 10. Dessauer Gasmotoren-Konferenz 2017.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

An integrated model for piston ring pack performance in internal combustion engines, Part K: Journal of Multi-body Dynamics, DOI: 10.1177/1464419317736676

Offner, G., Mahmoud, K., Knaus, O., Parikyan, T. & Sklepic, S., 2017, IMechE.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Antriebsprüfstand zur energieeffizienz-optimierten Antriebssystemauswahl

Hafner, N. & Stöhr, T., 11 May 2017, Tagungsband der 5. Tagung Innovation Messtechnik. p. 59-64

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application Limits of the Complex Eigenvalue Analysis for Low-Frequency Vibrations of Disk Brake Systems

Huemer-Kals, S., Pürscher, M. & Fischer, P., 17 Sep 2017, SAE Technical Paper. 15 p. 2017-01-2494

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Brakes
Creep
Linearization
Bushings
Stick-slip

Approaches to Meeting Fluctuating Natural Gas Quality in Large Bore Engine Applications

Zelenka, J., Hoff, C., Kirsten, M. & Wimmer, A., Dec 2017, IAV Tagung Knocking in Gasoline Engines.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Simulation-based Evaluation of Dynamic Task Prioritization in Maintenance Management

Neubacher, D., Furian, N., Gutschi, C., Elmer, T. & Vössner, S., 27 Oct 2017, Proceedings of the 31st European Simulation and Modelling Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Condition monitoring
Availability
Predictive analytics

Assessment of Electric Arc Models used in Recent Spark Ignition Models

Meyer, G., Salbrechter, S., Tilz, A. & Wimmer, A., 2017, ECM 8th Combustion Meeting.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Theoretical and Experimental Study of the Formation of Aromatic Hydrocarbons (BTX/PAH) as Soot Precursors from Biomass Pyrolysis Products

Mehrabian Bardar, R., SHIEHNEJADHESAR, A., Bahramian, H., Anca-Couce, A., Sommersacher, P., Hochenauer, C. & Scharler, R., 2017, Proceedings of the 25th European Biomass Conference. p. 371-376

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Auswirkungen einer falschen Spannungsarmglühung beim Schweißen höchstfester Stähle

Enzinger, N. & Cerjak, H-H., 18 Oct 2017, Schadensanalyse 2017: Schäden an geschweißten Bauteilen. p. 211-221

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A verification of draft tube modifications of a vertical axis Kaplan turbine by means of CFD

Schiffer-Rosenberger, J., Benigni, H., Jaberg, H. & Penninger, G., 14 Mar 2017, Proceedings of AFRICA 2017: Water Storage and Hydropower Development for Africa. The International Journal of Hydropower and Dams, 10 p. 08.04

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Biocompatible ceramic-biopolymer coatings obtained by electrophoretic deposition on electron beam structured titanium alloy surfaces

Ramskogler, C., Cordero, L., Warchomicka, F., Boccaccini, A. R. & Sommitsch, C., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications Ltd., p. 1552-1557 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Biopolymers
biopolymers
titanium alloys
Titanium alloys
Electron beams

CFD-FE Simulation for the optimization of a cylinder pressure Sensor application in a large gas engine

Kober, M., Schubert-Zallinger, C., Wimmer, A. & Milošević, I., 2017, International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics: HEFAT2017.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Challenges for Educators in PSM-Curricula: Quest for Closing the Gap with Employers’ Requirements

Stek, K., Koch, V., Zunk, B. M. & Schiele, H., 2017, Proceedings of the 26th annual IPSERA Conference: Coping with the Future: Picking your Battles. Budapest, 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Combination of LNT and Passive SDPF: A System Assessment for Small Passenger Car Diesel Engines under RDE Conditions

Ratzberger, R., Schutting, E., Eichlseder, H., Hadl, K., Wieser, M. & Mitterecker, H., 2017, 26th Aachen Colloquium Automobile and Engine Technology 2017. p. 1037-1056

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Comprehensive 3d-Elastohydrodynamic Simulation of Hermetic Compressor Crank Drive

Posch, S., Hopfgartner, J. W., Berger, E., Almbauer, R. & Schöllauf, P., 2017, Proceedings of the International Conference on Compressors and their Systems 2017, London, GB.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Coupled Elastodynamics of Piston Compression Ring Subject to Sweep Excitation: Part K: Journal of Multi-body Dynamics

Offner, G., Turnbull, R., Mohammadpour, M., Rahmani, R. & Rahnejat, H., 2017, Institution of Mechanical Engineers (IMechE). p. 231(3): 469–479

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

"Culture Eats Strategy for Breakfast" - Qualitätskultur an der TU Graz

Gaberscik, G., Bauer, U. & Weichsler, M., 2017, Qualitätskultur: Ein Blick auf die gelebte Praxis der Hochschulen: Beiträge zur 4. AQ Austria Jahrestagung 2016. Hopbach, A. (ed.). Wien: Agentur für Qualitätssicherung und Akkreditierung Austria, p. 91 97 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Current and future industrial challenges: Demographic change and measures for elderly workers in industry 4.0

Wolf, M., Kleindienst, M., Ramsauer, C., Zierler, C. & Winter, E., 7 Apr 2017, Management of Technology Step to Sustainable Production: Conference Proceedings: 9 th International Sientific Conference Management of technology step to sutainiable production. Croatian Association for PLM

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of the Oil Distribution in a Hermetic Compressor Using Numerical Simulation

Posch, S., Hopfgartner, J. W., Berger, E., Zuber, B., Almbauer, R. & Schöllauf, P., 2017, Proceedings of the International Conference on Compressors and their Systems 2017, London, GB.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determining a function for the damping coefficient of a laminated stack

Zahalka, C. & Ellermann, K., 2017, SIRM 2017. p. 404-413

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development and manufacturing process optimization of mechatronics products by innovative key performance indicators

Hirz, M. & Ernst, M., 2017, MOTSP 2017 - International Conference Management of Technology – Step to Sustainable Production.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development and Validation of a Reduced Reaction Mechanism for CFD Simulation of Diesel Ignited Gas Engines

Eder, L., Kiesling, C., Pirker, G. & Wimmer, A., Aug 2017, ENCOM 2017.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a highly efficient, compact size, micro-CHP plant for the use of various biomass fuels and operational experience

Buchmayr, M., Gruber, J., Hargassner, M. & Hochenauer, C., Aug 2017, Conference Proceedings of the 25th EUBCE.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a Highly Flexible SOFC CCHP System Towards Demand-Oriented Power Generation from Renewable Fuels

Hauth, M., Seidl, M., Postl, A., Sallai, C., Soukup, N., Albert, J., Weinländer, C., Rieberer, R. & Hochenauer, C., 2017, ECS Transactions: SOFC-XV: 15th International Symposium on Solid Oxide Fuel Cells. Singhal, S. C. & Kawada, T. (eds.). 1 ed. Hollywood, FL, Vol. 78. p. 155-170 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of an Innovative Low-Cost/Low-Emission Pellet-Based Stove Technology

Gruber, T., Mehrabian Bardar, R., SHIEHNEJADHESAR, A., Bauer, T., Anca-Couce, A. & Scharler, R., 2017, Proceedings of the 25th European Biomass Conference. p. 618-622

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Development of a Segmented Single SOFC Test Equipment to Simulate Stack-Like Operating Conditions

Hauth, M., Schaffer, D., Soukup, N., Gitz, A., Dufour, C., Rachinger, M. & Fink, C., 27 Jul 2017, ECS Transactions. 1 ed. Vol. 78. p. 2115 2132 p. 270

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Solid oxide fuel cells (SOFC)
Computational fluid dynamics
Steam reforming
Gases
Anodes

Development of high creep resistant MARBN steels for forged components in high efficient power plants

Plesiutschnig, E., Zeiler, G., Sommitsch, C. & Beal, C., 2017, Proceedings - 20th International Forgemasters Meeting - IFM 2017. p. 115-123

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
Power plants
Creep
Heat treatment
Recovery

Drivers of Customer Attractiveness on Raw Material Markets

Zunk, B. M. & Marchner, M., 2017, Proceedings of the 7th International Conference on Restructuring of the Global Economy. 1 ed. Oxford, UK: Academy of Business and Retail Management , Vol. 9. p. 77

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamic simulation of multi-plate clutches for automotive applications

Gradwohl, C., Belšak, A. & Hirz, M., 18 Apr 2017, ASim17-10. p. 1-17 17 p. ASim17-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Clutches
Computer simulation
Torque
Friction
Splines

Dynamisch validierte Kältekreislaufsimulation eines Haushaltsgefrierschranks mit IPSEpro

Rohrhofer, M., Zuber, B., Posch, S., Hopfgartner, J. W., Almbauer, R. & Perz, E., 2017, Tagungsband der DKV-Tagung in Bremen 2017.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effect of Cylinder De-Activation on the Tribological Performance of Compression Ring Conjunction: Part J: Journal of Engineering Tribology

Offner, G., Bewsher, S. R., Turnbull, R., Mohammadpour, M., Rahmani, R. & Rahnejat, H., 2017, Institution of Mechanical Engineers (IMechE). p. 231(8): 997–1006

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effect of mischmetal additions and solution heat treatments (T4) on the microstructure and mechanical properties of thixocast ZK60-RE magnesium alloys

da Silva, E. P., Buzolin, R. H., Callegari, B., Warchomicka, F., Requena, G. C. & Pinto, H. C., 1 Jan 2017, THERMEC 2016. Trans Tech Publications Ltd., p. 2300-2305 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

mischmetal
Rare earth alloys
rare earth alloys
magnesium alloys
Magnesium alloys

Eine Roadmap zum Physical Internet: Anwendungsbeispiele, Methoden und erste Ergebnisse

Ehrentraut, F., Gasperlmair, A., Landschützer, C., Graf, H-C., Helmut, Z. (ed.) & Altendorfer-Kaiser, S. (ed.), 21 Sep 2017, Logistisches Produktionsmanagement. Berlin: epubli, p. 39-54

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electron beam welding of TZM sheets

Stütz, M., Oliveira, D., Rüttinger, M., Reheis, N., Kestler, H. & Enzinger, N., 2017, THERMEC 2016. Trans Tech Publications Ltd., Vol. 879. p. 1865-1869 5 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

electron beam welding
Electron beam welding
Welds
Welding
Fusion reactions

Energy Consumption Factor as a new Classification Figure to compare Production Processes

Haas, F., 2017, Jahrbuch Instandhaltungstage 2017. Isopp, J. & Dankl, A. (eds.). p. 139-142 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Energy efficiency benchmarking concept for diverse automated storage and retrieval systems

Schadler, M., Stöhr, T. & Hafner, N., 4 Oct 2017, International Conference on Material Handling, Constructions and Logistics 2017. Zrnic, N., Bosnjak, S. & Kartnig, G. (eds.). Belgrade, Vol. 22. p. 133-138 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Energy Efficiency Calculator Model to Optimize Intralogistics Systems

Stöhr, T. & Hafner, N., 4 Oct 2017, International Conference on Material Handling Constructions and Logistics 2017. Zrnic, N., Bosnjak, S. & Kartnig, G. (eds.). Vol. 22. p. 129-132 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review