Mario Hirz

Assoc.Prof. Dipl.-Ing. Dr.techn.

19952020
If you made any changes in Pure these will be visible here soon.

Research Output 2000 2019

3. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.) & Hirz, M. (ed.), 2008, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthologyResearch

3D-CAD Development and Design Methods in the Two Wheeler Industry

Hirz, M. & Tromayer, J., 19 Jul 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

3D CAD parametric design strategies with interlinked CAE reference object creation for the overall vehicle layout optimization in the early automotive concept phase

Rossbacher, P., Hirz, M. & Dietrich, W., 2010, Fisita World Congress. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3D Vision Guided Robotic Charging Station for Electric and Plug-in Hybrid Vehicles

Miseikis, J., Rüther, M., Walzel, B., Hirz, M. & Brunner, H., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

4. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.) & Hirz, M. (ed.), 2010, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthologyResearch

5. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.), Stadler, S. (ed.) & Hirz, M. (ed.), 2012, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthologyResearch

6. Grazer Nutzfahrzeuge Workshop

Hirschberg, W. (ed.), Stadler, S. (ed.) & Hirz, M. (ed.), 2014, .

Research output: Book/ReportAnthologyResearch

A CAD-based layout environment for a semi-automated test bench assembly

Gradwohl, C., Stadler, S., Hirz, M. & Waser, H. M., 2015, In : Computer-aided design and applications. 12, 5, p. 617-626

Research output: Contribution to journalArticleResearchpeer-review

A contribution to advanced knowledge-based design in the development of complex mechanical products

Stadler, S. & Hirz, M., 2013, ICED13 - Design for Harmonies. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Contribution to Optimized Data Exchange Supporting Automotive Bodywork Engineering

Kreis, A., Hirz, M. (Guest ed.) & Stadler, S. (Guest ed.), 2019, (Accepted/In press) In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

Automotive engineering
Data Exchange
Electronic data interchange
Data Management
Development Process

Advanced 3D-CAD Design Methods in Education and Research

Hirz, M., Harrich, A. & Rossbacher, P., 2010, In : Journal of systemics, cybernetics and informatics. 7, 6, p. 30-34

Research output: Contribution to journalArticleResearchpeer-review

Advanced 3D-CAD Design Methods in Education and Research

Hirz, M., Harrich, A. & Rossbacher, P., 2009, The 2nd International Multi-Conference on Engineering and Technological Innovation. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Advanced Computer Aided Design in Conceptual Automotive Development

Hirz, M., 2011

Research output: ThesisHabilitationResearch

Open Access
File

Advanced computer aided design methods for integrated virtual product development processes

Hirz, M., Harrich, A. & Rossbacher, P., 2011, In : Computer-aided design and applications. 8, 6, p. 901-913

Research output: Contribution to journalArticleResearchpeer-review

Advanced computer aided design methods for integrated virtual product development processes

Hirz, M., Harrich, A. & Rossbacher, P., 2011, CAD Conference 2011. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Aerodynamic investigations in conceptual vehicle development supported by integrated design and simulation methods

Hirz, M., Stadler, S., Prenner, M. & Mayr, J., 2012, FISITA World Congress 2012. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Aerodynamische Grundsatzuntersuchungen an einem LKW-Hängerzug

Stadler, S. & Hirz, M., 2011, .

Research output: Book/ReportOther reportResearch

A knowledge-based framework for integration of computer aided styling and computer aided engineering

Stadler, S. & Hirz, M., 2016, In : Computer-aided design and applications. 13, 4, p. 558-569

Research output: Contribution to journalArticleResearchpeer-review

Aktuelle Forschungsthemen und innovative Trends der Elektromobilität in Österreich

Fabian, J., Brunner, H., Hirz, M., Wieland, T., Schmautzer, E., Fickert, L., Wegleiter, H., Slupetzky, W. & Schmied, R., 2014, (Accepted/In press) Innehalten und Ausblick: Effektivität und Effizienz für die Energiewende. Graz: Technische Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Layoutframework for Conceptual Automotive Seat Development

Hirz, M., Rossbacher, P., Harrich, A. & Hintringer, H., 2011, In : Journal of engineering and technology. 2, 1, p. NN-NN

Research output: Contribution to journalArticleResearch

A method for external controlled parameterised automotive design at an initial development stage

Göber, T., Hirz, M. & Krammer, S., 2008, 2008 Encyclopaedia 'Simulation in Automotive Engineering - Best Practices of OEMs and Suppliers'. 1 ed. Graz: ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

A Method for externally controlled parameterised Automotive Design at an initial Development Stage

Göber, T., Hirz, M. & Krammer, S., 2006, Proceedings / 2006 Conference Virtual Product Development (VPD) in Automotive Engineering. Graz: payerconsulting, p. 103-118

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Method of CAD based Automation and Simulation by the Example of Virtual Stone Chipping Investigation

Ernst, M., Hirz, M. & Stadler, S., 2014, In : Computer-aided design and applications. 11, 3, p. 295-304

Research output: Contribution to journalArticleResearchpeer-review

An advanced electrical approach to gauge rotor position sensors for optimizing electric drive train systems

Datlinger, C. & Hirz, M., 12 Apr 2019, (Accepted/In press).

Research output: Contribution to conferencePaperResearchpeer-review

Analysis Methods in the Development Process of Mechatronic Drivetrain Systems with Special Focus on Automotive Software

Ernst, M., Erlachner, S., Hirz, M., Fabian, J. & Wotawa, F., 2015, Volume II. ., p. 63-68

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An application of enhanced 3D-CAD methods with integrated geometry creation algorithms for PVC-seams in automotive body in white design

Frener, G., Thum, K., Hirz, M. & Harrich, A., 2012, In : 3D Research . p. 1-10

Research output: Contribution to journalArticleResearch

An Application of Enhanced Knowledge-Based Design in Automotive Seat Development

Stadler, S. & Hirz, M., 2013, In : Computer-aided design and applications. 11, 3, p. 335-345

Research output: Contribution to journalArticleResearchpeer-review

An Approach of Multi Disciplinary Collaboration in Conceptual Automotive Development

Hirz, M., 2011, In : International journal of collaborative enterprise. p. 39-56

Research output: Contribution to journalArticleResearchpeer-review

An approach supporting integrated modeling and design of complex mechatronics products by the example of automotive applications

Hirz, M., 11 Jul 2018, 22nd Multi-Conference on Systemics, Cybernetics and Informatics WMSCI 2018. p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A new approach for the reduction of aerodynamic drag of long-distance transportation vehicles

Hirz, M. & Stadler, S., 1 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A new approach for the reduction of aerodynamic drag of long-distance transportation vehicles

Hirz, M. & Stadler, S., 2013, SAE 2013 Commercial Vehicle Engineering Congress. SAE, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A New Approach for the Reduction of Aerodynamic Drag of Long-Distance Transportation Vehicles

Hirz, M. & Stadler, S., 2013, In : SAE International journal of commercial vehicles. 6, 2, p. 453-458

Research output: Contribution to journalConference articleResearchpeer-review

A new approach of a global knowledge-based engineering infrastructure

Salchner, M., Hirz, M., Stadler, S. & Ameye, J., 2016, Computer-Aided Design and Applciations.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A new approach of a global knowledge-based engineering infrastructure

Salchner, M., Hirz, M., Stadler, S. & Ameye, J., 2016.

Research output: Contribution to conferenceAbstractResearchpeer-review

A new approach of a global knowledge-based engineering infrastructure

Salchner, M., Hirz, M., Stadler, S. & Ameye, J., 2016.

Research output: Contribution to conferencePaperResearchpeer-review

An extended approach for validation and optimization of position sensor signal processing in electric drive trains

Datlinger, C. & Hirz, M., 15 Jan 2019, In : Electronics. 8, 1, 24 p., 77.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Anforderungen an das Fahrzeug für die multimodale Mobilität der Zukunft

Brunner, H., Hirz, M. & Fabian, J., 2014, Grazer Symposium Virtuelles Fahrzeug. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Anforderungen an die Tankstelle im Jahr 2025

Walzel, B., Hirz, M. & Brunner, H., 10 Feb 2016.

Research output: Contribution to conferencePaperResearch

Open Access
File
Gases
Superchargers

Anforderungen an die Tankstelle im Jahr 2025

Walzel, B. & Hirz, M., 10 Feb 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A novel approach of aerodynamic optimization on long-distance transportation trucks

Stadler, S. & Hirz, M., 2014, FISITA 2014 World Congress. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Are low-cost, low-tech Solutions adequate for Small Capacity EU III Motorcycles?

Kirchberger, R., Eichlseder, H., Tromayer, J., Hirz, M., Neumann, G. & Steinbrenner, K., 2007, Development Trends of Motorcycles III. 1 ed. Essen: expert verlag GmbH , p. 74-95

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Aspects of Future Mobility & Trends in Automotive Industry

Hirz, M., 12 Sep 2016, p. 1-30. 30 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Auspuffanlage für eine Verbrennungskraftmaschine

Kirchberger, R., Hirz, M., Koller, G., Winkler, F. & Korman, M., 14 Dec 2009, (Submitted) Patent No. AT 09450235.8-2321

Research output: PatentResearch

Automated robot-based charging system for electric vehicles

Walzel, B. & Hirz, M., 15 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Automated robot-based charging system for electric vehicles

Walzel, B., Sturm, C., Fabian, J. & Hirz, M., 15 Mar 2016. 14 p.

Research output: Contribution to conferencePaperResearch

File
Electric vehicles
Parking
Robots
Charging (batteries)
Hybrid vehicles

Automated support of weld spot definition processes in CATIA V5

Rossbacher, P. & Hirz, M., 2008, Graz: .

Research output: Book/ReportOther reportResearch

Automatische Schnittgenerierung in Catia V5

Göber, T., Lang, M. & Hirz, M., 2006, .

Research output: Book/ReportOther reportResearch

Automatische Schnittgenerierung in Catia V5 R16

Lang, M., Hirz, M. & Göber, T., 2007, .

Research output: Book/ReportOther reportResearch