Mario Hirz

Assoc.Prof. Dipl.-Ing. Dr.techn.

19952020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

A Contribution to Optimized Data Exchange Supporting Automotive Bodywork Engineering

Kreis, A., Hirz, M. & Stadler, S., 2020, In : Computer-aided design and applications. 17, 1, p. 187-189

Research output: Contribution to journalArticleResearchpeer-review

CAD-Automation in Automotive Development – Potentials, Limits and Challenges

Kreis, A., Hirz, M. & Rossbacher, P., 25 May 2020, Proceedings of CAD '20, Barcelona. CAD Solutions, LLC, p. 56-60

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

Cost Reduction of Electric Powertrains by Platform-Based Design Optimization

Lechleitner, D., Hofstetter, M. & Hirz, M., 23 Jun 2020, (Accepted/In press).

Research output: Contribution to conferencePaperResearchpeer-review

Evaluation of Methods for Identification of Driving Styles and Simulation-Based Analysis of their Influence on Energy Consumption on the Example of a Hybrid Drive Train

Domijanic, M., Hirz, M. & Pucher, G., 14 Apr 2020, SAE Technical Paper. Vol. 2020-01-0443. 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimized Data Exchange Process between Design and Production Engineering

Kreis, A. & Hirz, M., 5 Feb 2020, In : Science & Technique. 19, 1, p. 5-11

Research output: Contribution to journalArticleResearch

Open Access

Tailored Data Exchange Process to Support Production Engineering

Kreis, A. & Hirz, M., Apr 2020, 2020 IEEE 7th International Conference on Industrial Engineering and Applications (ICIEA). Vol. 2020.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Virtual Tools to Support Design and Production Engineering: Early detection of stone chips to optimize production processes

Fragner, A., Kreis, A. & Hirz, M., Apr 2020, 2020 IEEE 7th International Conference on Industrial Engineering and Applications (ICIEA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2019

An advanced electrical approach to gauge rotor position sensors for optimizing electric drive train systems

Datlinger, C. & Hirz, M., 2019, p. 12.

Research output: Contribution to conferencePaperResearchpeer-review

An extended approach for validation and optimization of position sensor signal processing in electric drive trains

Datlinger, C. & Hirz, M., 15 Jan 2019, In : Electronics. 8, 1, 24 p., 77.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Automatisiertes Laden von Elektrofahrzeugen mit konduktiven Ladestandards

Walzel, B., Hirz, M. & Brunner, H., May 2019, 40. Internationales Wiener Motorensymposium. Geringer, B. (ed.). Düsseldorf: VDI-Verlag Düsseldorf, Vol. 2. p. 462-476 (Fortschrittberichte VDI : Reihe 12, Verkehrstechnik, Fahrzeugtechnik; vol. 811,2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Database Driven Ergonomic Vehicle Development via a Fully Parametric Seating Buck

Tiefnig, J., Hirz, M. & Dietrich, W., 28 Jul 2019, Advances in Human Factors of Transportation: Proceedings of the AHFE 2019 International Conference on Human Factors in Transportation, July 24–28, 2019, Washington D.C., USA. Stanton, N. (ed.). Cham: Springer Verlag, p. 377-383 (Advances in Intelligent Systems and Computing; vol. 964).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric Propulsion Systems Design Supported by Multi-Objective Optimization Strategies

Hirz, M., Hofstetter, M. & Lechleitner, D., 9 Oct 2019, 16th European Automotive Congress EAEC 2019. 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric Propulsion Systems Design Supported by Multi-Objective Optimization Strategies

Hirz, M., Hofstetter, M. & Lechleitner, D., 26 Dec 2019, In : Science & Technique. 18, 6, p. 461-470

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Research on Autonomous Driving based on a Highly Flexible Prototype Vehicle

Brunner, H., Zhi, X., Mietschnig, M., Jones, S., Zhou, S., Steinbauer, G. & Hirz, M., 7 Nov 2019.

Research output: Contribution to conferencePaperResearchpeer-review

Robot-Based Fast Charging of Electric Vehicles

Walzel, B., Hirz, M., Brunner, H. & Kreutzer, N., 2019, p. SAE Technical Paper 2019-01-0869. 14 p.

Research output: Contribution to conferencePaperResearchpeer-review

Simulation Model for Drivability Assessment and Optimization of Hybrid Drive Trains

Domijanic, M. & Hirz, M., 9 Oct 2019, 16th European Automotive Congress EAEC 2019. 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulationsmodelle für die Bewertung des Einflusses des Fahrerverhaltens auf die Regelung von xEV Antriebssträngen

Domijanic, M. & Hirz, M., 16 May 2019, 40. International Vienna Motor Symposium - Reports of the Austrian Society of Automotive Engineers. 16 p.

Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

System Cost Reduction by Electric Powertrain Design Optimization

Hofstetter, M., Lechleitner, D. & Hirz, M., 10 Dec 2019.

Research output: Contribution to conferencePaperResearchpeer-review

Torsional vibration of multi-plate clutches analysed with hybrid method

Belšak, A. & Hirz, M., 9 Dec 2019, DAAAM International Scientific Book 2019 . Katalinic, B. (ed.). Vienna: Danube Adria Association for Automation & Manufacturing, DAAAM, Vol. 18. p. 175-190

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Open Access
2018

An approach supporting integrated modeling and design of complex mechatronics products by the example of automotive applications

Hirz, M., 11 Jul 2018, 22nd Multi-Conference on Systemics, Cybernetics and Informatics WMSCI 2018. p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Autonomes Parken und Laden von E-Fahrzeugen

Walzel, B., Brunner, H. & Hirz, M., 26 Apr 2018, Berichte des des Österreichischen Vereins für Kraftfahrzeugtechnik (ÖVK). p. 1-11 11 p.

Research output: Chapter in Book/Report/Conference proceedingOther chapter contributionResearch

File

Big Data-Based Driving Pattern Clustering and Evaluation in Combination with Driving Circumstances

Si, L., Hirz, M. & Brunner, H., 3 Apr 2018, In : SAE Technical Papers. 2018-01-1087, 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Convenient Connection Technology Data Model Supporting Optimized Information Exchange between CAx-Systems

Kreis, A., Hirz, M., Stadler, S., Salchner, M. & Rossbacher, P., 1 May 2018, In : Computer-aided design and applications. p. 1-10

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Evaluation of various means of transport for urban areas

Brunner, H., Hirz, M., Hirschberg, W. & Fallast, K., 7 Mar 2018, In : Energy, Sustainability and Society . 8, 11 p., 9.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Impact of rotor position sensor errors on speed controlled permanent magnetized synchronous machines

Gachter, J., Hirz, M. & Seebacher, R., 9 Feb 2018, 2017 IEEE 12th International Conference on Power Electronics and Drive Systems, PEDS 2017. Institute of Electrical and Electronics Engineers, Vol. 2017-December. p. 822-830 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Integrated Approach Supporting Virtual Conception of Passenger Ergonomics in Automated Driving Cars

Hirz, M. & Rossbacher, P., 20 Jul 2018, Applied Human Factors and Ergonomics. Springer, p. 1-11 (Advances in Intelligent Systems and Computing).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations of Rotor Shaft Position Sensor Signal Processing in Electric Drive Train Systems

Datlinger, C. & Hirz, M., 10 Aug 2018, ITEC Asia-Pacific 2018 - 2018 IEEE Transportation Electrification Conference and Expo, Asia-Pacific: E-Mobility: A Journey from Now and Beyond. Institute of Electrical and Electronics Engineers, 8433277

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi-objective gearbox design optimization for xEV-axle drives under consideration of package restrictions

Hofstetter, M., Lechleitner, D., Hirz, M., Gintzel, M. & Schmidhofer, A., 6 Sep 2018, In : Forschung im Ingenieurwesen.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Multi-Objective Gearbox Design Optimization for xEV-Axle Drives under Consideration of Package Restrictions

Hofstetter, M., Lechleitner, D., Hirz, M., Gintzel, M. & Schmidhofer, A., 27 Jun 2018, International VDI Congress Dritev - Drivetrain for Vehicles. Düsseldorf: VDI Wissensforum GmbH, p. 239-254 (VDI-Berichte; vol. 2328).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi-Objective System Design Synthesis for Electric Powertrain Development

Hofstetter, M., Hirz, M., Gintzel, M. & Schmidhofer, A., 13 Jun 2018, 2018 IEEE Transportation and Electrification Conference and Expo (ITEC). IEEE Publications, p. 286-292

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New Concepts in Automotive Industry

Hussein, H. M. A. & Hirz, M., 22 Feb 2018, (Submitted) 3rd International Conference On Innovative Design, Analysis & Development Practices In Aerospace And Automotive Engineering. Chennai, India

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier

Kreis, A., Hirz, M. & Stadler, S., 19 Jun 2018, 2018 5th International Conference on Industrial Engineering and Applications (ICIEA). IEEE Xplore, p. 184-188 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Sensor and object recognition technologies for self-driving cars

Hirz, M. & Walzel, B., 6 Mar 2018, In : Computer-aided design and applications. 15, 4, p. 501-508

Research output: Contribution to journalArticleResearchpeer-review

System Design Model for Parallel Hybrid Powertrains using Design of Experiments

Christian, S., Hirz, M., Allouchery, L. & Lichtenegger, S., 3 Apr 2018, In : SAE Technical Papers. 2018-01-0417, 7 p.

Research output: Contribution to journalArticleResearchpeer-review

2017

3D Vision Guided Robotic Charging Station for Electric and Plug-in Hybrid Vehicles

Miseikis, J., Rüther, M., Walzel, B., Hirz, M. & Brunner, H., 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Considering influences of sustainable production in early automotive engineering phases

Brunner, H., Hirz, M. & Wurzer, A., 30 May 2017, In : Annals of Faculty Engineering Hunedoara – International Journal of Engineering . 15, 2, p. 85-90 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Development and manufacturing process optimization of mechatronics products by innovative key performance indicators

Hirz, M. & Ernst, M., 2017, MOTSP 2017 - International Conference Management of Technology – Step to Sustainable Production.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamic simulation of multi-plate clutches for automotive applications

Gradwohl, C., Belšak, A. & Hirz, M., 18 Apr 2017, ASim17-10. p. 1-17 17 p. ASim17-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Enhanced knowledge-based 3D-CAD methods supporting automotive body-in-white production engineering

Hirz, M. & Rossbacher, P., 30 May 2017, In : ACTA Technica Corviniensis. 2012, 2, p. 123-128 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of signal processing effects on rotor position sensor systems for electric traction motors

Datlinger, C. & Hirz, M., 2017, Conference EAEC 2017.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Flexible parameterization strategies in automotive 3D vehicle layout

Rossbacher, P. & Hirz, M., 2017, In : Computer-aided design and applications. p. 549-562

Research output: Contribution to journalArticleResearchpeer-review

Future trends in CAD – from the perspective of automotive industry

Hirz, M., Rossbacher, P. & Gulanova, J., 7 Jul 2017, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

Generative engineering design methodology used for the development of surface-based components

Gulanova, J., Gulan, L., Forrai, M. & Hirz, M., 2017, In : Computer-aided design and applications.

Research output: Contribution to journalArticleResearchpeer-review

Impact of Rotor Position Sensor Errors on Speed Controlled Permanent Magnetized Synchronous Machine

Gächter, J., Hirz, M. & Seebacher, R., 15 Dec 2017, 12th IEEE International Conference on Power Electronics and Drive Systems (IEEE PEDS 2017). p. 822-830

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mechanismus und Verfahren zur Variation des Achsabstandes eines Fahrzeuges

Hirz, M., Walzel, B. & Brunner, H., 15 Jul 2017, IPC No. B62D 061/06, Patent No. AT15470U12017-09-15, Priority date 17 Jun 2016, Priority No. GM145/2016-15469

Research output: PatentResearch

Optimization of fail-operational automotive system and hardware architectures

Schnellbach, A. & Hirz, M., 2017, IQPC Conference ISO 26262.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

SENSOR CONCEPTS FOR CHARGING SLOW PROXIMITY LOCALIZATION FOR AUTOMATED CONDUCTIVE CHARGING OF ELECTRIC AND PLUG-IN HYBRID VEHICLES

Walzel, B. & Hirz, M., 6 Apr 2017. 8 p.

Research output: Contribution to conferencePaperResearchpeer-review