Mario Hirz

Assoc.Prof. Dipl.-Ing. Dr.techn.

19952020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2010

CAD – based synthesis of a window lifter mechanism

Harrich, A., Mayr, J., Hirz, M., Rossbacher, P., Lang, J., Gfrerrer, A. & Haselwanter, A., 2010, SAE World Congress. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

CAD-basierte Ansichtsdatenaufbereitung für die Karosserievermessung

Frener, G., Rossbacher, P. & Hirz, M., 2010, .

Research output: Book/ReportOther report

CAD-basiertes Werkzeug zur Vorauslegung der Crashstruktur eines Frontendmoduls

Harrich, A., Sinz, W., Hirz, M. & Lorenzer, M., 2010, Kongress SIMVEC Berechnung und Simulation im Fahrzeugbau. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, p. 585-600

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Die Zukunft fährt elektrisch

Pilch, G., Hirschberg, W., Niederkofler, H., Willberger, J., Hirz, M., Ackerl, M. & Eichberger, A., 29 Apr 2010, Kleine Zeitung / Stadtausgabe, p. 14-15.

Research output: Contribution to specialist publicationArticle

Open Access
File

Energy Efficient Operation of In-Wheel Motors for 4 Wheel Driven Passenger Cars

Willberger, J. & Hirz, M., 2010, (Submitted) Alternative Driveline. .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integrated design and simulation methods in conceptual suspension development

Böhm, D. F. & Hirz, M., 2010, FISITA World Congress 2010. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integration von geometrischen und funktionalen Aspekten in die parametrisch assoziative Modellgestaltung in der konzeptionellen Automobilentwicklung

Dietrich, W., Hirz, M. & Rossbacher, P., 2010, 3. Grazer Symposium Virtuelles Fahrzeug (GSVF). ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The potential of parametric design methods in automotive door development

Hirz, M., Harrich, A., Mayr, J. & Haselwanter, A., 2010.

Research output: Contribution to conferencePoster

The potential of parametric design methods in automotive door development

Hirz, M., Harrich, A., Mayr, J. & Haselwanter, A., 2010, Fisita World Congress. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The potential of parametric design methods in automotive door development

Hirz, M., Harrich, A., Mayr, J. & Haselwanter, A., 30 May 2010.

Research output: Contribution to conference(Old data) Lecture or Presentation

2009

Advanced 3D-CAD Design Methods in Education and Research

Hirz, M., Harrich, A. & Rossbacher, P., 2009, The 2nd International Multi-Conference on Engineering and Technological Innovation. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Auspuffanlage für eine Verbrennungskraftmaschine

Kirchberger, R., Hirz, M., Koller, G., Winkler, F. & Korman, M., 14 Dec 2009, (Submitted) Patent No. AT 09450235.8-2321

Research output: Patent

Catia V5 Surface Design in Mechanical Engineering

Hirz, M. & Mayr, J., 27 Mar 2009.

Research output: Contribution to conference(Old data) Lecture or Presentation

Entwicklung eines CATIA V5 Makros für PVC-Nähte im Karosseriebau

Frener, G., Tzivanopoulos, T., Rossbacher, P., Hirz, M. & Hirschberg, W., 2009, .

Research output: Book/ReportOther report

Entwicklung eines Werkzeugs zur parametergesteuerten Konzeptarbeit in der Automobilentwicklung - ConceptCar 2

Rossbacher, P., Theiss, N. & Hirz, M., 2009, .

Research output: Book/ReportOther report

Kinematic Optimisation of an Automotive Door

Harrich, A., Hirz, M., Mayr, J., Rossbacher, P. & Haselwanter, A., 2009, NAFEMS World Congress. ., p. 42-42

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Makrogestützte Steinschlaguntersuchung in CATIA V5

Rossbacher, P. & Hirz, M., 2009, .

Research output: Book/ReportOther report

Semiautomatische Erstellung von Spritzdüsen für die Hohlraumkonservierung in Catia V5

Rossbacher, P., Thum, K. & Hirz, M., 2009, Graz: .

Research output: Book/ReportOther report

The Potential of 3D-CAD Based Process Optimization in the Automotive Concept Phase

Rossbacher, P., Hirz, M., Harrich, A., Dietrich, W. & Theiss, N., 2009, SAE World Congress. ., p. 0-10

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The Potential of 3D-CAD Based Process – Optimization in the Automotive Concept Phase

Rossbacher, P., Hirz, M., Harrich, A., Dietrich, W. & Theiss, N., 2009, In : SAE International journal of materials and manufacturing. 2, 1, p. 250-257

Research output: Contribution to journalArticle

Unterstützte Auslegung einer PKW - Scheibenabsenkung

Mayr, J., Hirz, M. & Hirschberg, W., 2009, .

Research output: Book/ReportOther report

Unterstützung der Türenkonstruktion in der Konzeptphase durch parametrisch- assoziative Konstruktionsmethoden

Harrich, A., Mayr, J., Hirz, M. & Haselwanter, A., 2009, OEM Forum Fahrzeugtüren und -klappen. Düsseldorf: Springer-VDI-Verlag GmbH & Co.KG, Vol. 2064. p. 21-37 (VDI-Berichte).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2008

3. Grazer Nutzfahrzeug Workshop

Hirschberg, W. (ed.) & Hirz, M. (ed.), 2008, Graz: Eigenverlag FTG.

Research output: Book/ReportAnthology

A method for external controlled parameterised automotive design at an initial development stage

Göber, T., Hirz, M. & Krammer, S., 2008, 2008 Encyclopaedia 'Simulation in Automotive Engineering - Best Practices of OEMs and Suppliers'. 1 ed. Graz: ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingChapter

Automated support of weld spot definition processes in CATIA V5

Rossbacher, P. & Hirz, M., 2008, Graz: .

Research output: Book/ReportOther report

CAD-Methoden für Superuser in der Automobilentwicklung

Hirz, M., Harrich, A., Rossbacher, P. & Mayr, J., 21 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or Presentation

Future potential of "high tech" 50cm³ two stroke and four stroke engines

Kirchberger, R., Winkler, F., Hirz, M., Korman, M. & Eichlseder, H., 3 Mar 2008.

Research output: Contribution to conference(Old data) Lecture or Presentation

Integrated 3D-CAD Design Methods in Early Automotive Development Processes

Hirz, M., Hirschberg, W. & Dietrich, W., 2008, FISITA 2008 - The Future of Automobiles and Mobility. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integrated 3D-CAD Design Strategies in Vehicle- and Engine Development Processes

Hirz, M., Göber, T. & Lang, M., 2008, 8. Internationales Stuttgarter Symposium - Automobil- und Motorentechnik. Stuttgart: FKFS, p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synthetic Engine Concept and Modularity for a 3-Wheeler

Thien, U., Skalla, C., Hirz, M. & Kirchberger, R., 2008, SAE India International Mobility Conference 2008. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

3D-CAD Development and Design Methods in the Two Wheeler Industry

Hirz, M. & Tromayer, J., 19 Jul 2007.

Research output: Contribution to conference(Old data) Lecture or Presentation

Are low-cost, low-tech Solutions adequate for Small Capacity EU III Motorcycles?

Kirchberger, R., Eichlseder, H., Tromayer, J., Hirz, M., Neumann, G. & Steinbrenner, K., 2007, Development Trends of Motorcycles III. 1 ed. Essen: expert verlag GmbH , p. 74-95

Research output: Chapter in Book/Report/Conference proceedingChapter

Automatische Schnittgenerierung in Catia V5 R16

Lang, M., Hirz, M. & Göber, T., 2007, .

Research output: Book/ReportOther report

Bifuel Concept Forecast for a 3-Wheeler Vehicle

Thien, U., Schmidt, A., Hirz, M. & Kirchberger, R., 2007, EAEC 2007. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Conceptual automotive design and digital mock up methods supported by external parameter control

Göber, T., Hirz, M., Krammer, S. & Pollheimer, D., 2007, SAE World Congress. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development Trends of Catalytic Converters in Small Two Wheeler Applications

Korman, M., Hirz, M., Kirchberger, R., Reck, A. & Kaiser, F. W., 2007, Development Trends of Motorcycles III. 1 ed. Essen: expert verlag GmbH , p. 96-118

Research output: Chapter in Book/Report/Conference proceedingChapter

ENTWICKLUNG EINES 4-TAKT OTTOMOTORS MIT KURBELGEHÄUSEAUFLADUNG

Kirchberger, R., Hirz, M. & Korman, M., 2007, Steiermark Innovation 2007. 1 ed. Graz: Leykam Buchverlagsgesellschaft, p. 140-141

Research output: Chapter in Book/Report/Conference proceedingChapter

Exhaust Emissions of Small Capacity Engine Technologies

Korman, M., Hirz, M. & Kirchberger, R., 2007, Konference Inovativna Avtomobilska Tehnologija = Conference Innovative Automotive Technology. Ljubljana: ULJ-FS Ljubljana LAVEK, p. 115-129

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low Emission High Performance 4 Stroke Scooter Engine - PartII

Korman, M., Hirz, M. & Kirchberger, R., 2007, .

Research output: Book/ReportOther report

Macro – based CAD- and DMU- Analysis Methods

Lang, M., Hirz, M. & Göber, T., 2007, 2007 Conference - VPD in Automotive Engineering. ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contribution

MSF-PC-Test in Catia V5

Hirz, M. & Tilz, A., 2007, Graz: .

Research output: Book/ReportOther report

Potential of high technology 50cm³ two stroke and four stroke engines

Kirchberger, R., Hirz, M., Winkler, F., Korman, M. & Eichlseder, H., 30 Oct 2007.

Research output: Contribution to conference(Old data) Lecture or Presentation

Potential of high technology 50cm³ two stroke and four stroke engines

Kirchberger, R., Eichlseder, H., Winkler, F., Korman, M. & Hirz, M., 2007, SETC 2007 / Session Engine Technology. Niigata: SAE, p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Supporting Methods for Conceptual Automotive Design and Digital Mock Up Based on External Parameter Control

Göber, T., Hirz, M., Krammer, S. & Pollheimer, D., 2007, Body Engineering and Design, Glass Applications, Corrosion Prevention and Design Tools. 1 ed. Warrendale, Pa.: Society of Automotive Engineers, p. 2007-01-0462

Research output: Chapter in Book/Report/Conference proceedingChapter

2006

A Method for externally controlled parameterised Automotive Design at an initial Development Stage

Göber, T., Hirz, M. & Krammer, S., 2006, Proceedings / 2006 Conference Virtual Product Development (VPD) in Automotive Engineering. Graz: payerconsulting, p. 103-118

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Automatische Schnittgenerierung in Catia V5

Göber, T., Lang, M. & Hirz, M., 2006, .

Research output: Book/ReportOther report