Mario Hirz

Assoc.Prof. Dipl.-Ing. Dr.techn.

19952020
If you made any changes in Pure these will be visible here soon.

Research Output 2000 2019

Filter
Conference contribution
2019

Automatisiertes Laden von Elektrofahrzeugen mit konduktiven Ladestandards

Walzel, B., Hirz, M. & Brunner, H., May 2019, 40. Internationales Wiener Motorensymposium. Geringer, B. (ed.). Düsseldorf: VDI-Verlag Düsseldorf, Vol. 2. p. 462-476 (Fortschrittberichte VDI : Reihe 12, Verkehrstechnik, Fahrzeugtechnik; vol. 811,2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Parking
Electric vehicles
Kinematics
Cables
Automation

Database Driven Ergonomic Vehicle Development via a Fully Parametric Seating Buck

Tiefnig, J., Hirz, M. & Dietrich, W., 28 Jul 2019, Advances in Human Factors of Transportation: Proceedings of the AHFE 2019 International Conference on Human Factors in Transportation, July 24–28, 2019, Washington D.C., USA. Stanton, N. (ed.). Cham: Springer Verlag, p. 377-383 (Advances in Intelligent Systems and Computing; vol. 964).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric Propulsion Systems Design Supported by Multi-Objective Optimization Strategies

Hirz, M., Hofstetter, M. & Lechleitner, D., 9 Oct 2019, 16th European Automotive Congress EAEC 2019. 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimized Data Exchange Process between Design and Production Engineering

Kreis, A. & Hirz, M., 2019, (Accepted/In press) EAEC.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation Model for Drivability Assessment and Optimization of Hybrid Drive Trains

Domijanic, M. & Hirz, M., 9 Oct 2019, 16th European Automotive Congress EAEC 2019. 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2018

An approach supporting integrated modeling and design of complex mechatronics products by the example of automotive applications

Hirz, M., 11 Jul 2018, 22nd Multi-Conference on Systemics, Cybernetics and Informatics WMSCI 2018. p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Impact of rotor position sensor errors on speed controlled permanent magnetized synchronous machines

Gachter, J., Hirz, M. & Seebacher, R., 9 Feb 2018, 2017 IEEE 12th International Conference on Power Electronics and Drive Systems, PEDS 2017. Institute of Electrical and Electronics Engineers, Vol. 2017-December. p. 822-830 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rotors
Sensors
Electric machinery
Speed control
Torque control

Integrated Approach Supporting Virtual Conception of Passenger Ergonomics in Automated Driving Cars

Hirz, M. & Rossbacher, P., 20 Jul 2018, Applied Human Factors and Ergonomics. Springer, p. 1-11 (Advances in Intelligent Systems and Computing).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations of Rotor Shaft Position Sensor Signal Processing in Electric Drive Train Systems

Datlinger, C. & Hirz, M., 10 Aug 2018, ITEC Asia-Pacific 2018 - 2018 IEEE Transportation Electrification Conference and Expo, Asia-Pacific: E-Mobility: A Journey from Now and Beyond. Institute of Electrical and Electronics Engineers, 8433277

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric drives
Signal processing
Rotors
Powertrains
Sensors

Multi-Objective Gearbox Design Optimization for xEV-Axle Drives under Consideration of Package Restrictions

Hofstetter, M., Lechleitner, D., Hirz, M., Gintzel, M. & Schmidhofer, A., 27 Jun 2018, International VDI Congress Dritev - Drivetrain for Vehicles. Düsseldorf: VDI Wissensforum GmbH, p. 239-254 (VDI-Berichte; vol. 2328).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi-Objective System Design Synthesis for Electric Powertrain Development

Hofstetter, M., Hirz, M., Gintzel, M. & Schmidhofer, A., 13 Jun 2018, 2018 IEEE Transportation and Electrification Conference and Expo (ITEC). IEEE Publications, p. 286-292

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New Concepts in Automotive Industry

Hussein, H. M. A. & Hirz, M., 22 Feb 2018, (Submitted) 3rd International Conference On Innovative Design, Analysis & Development Practices In Aerospace And Automotive Engineering. Chennai, India

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier

Kreis, A., Hirz, M. & Stadler, S., 19 Jun 2018, 2018 5th International Conference on Industrial Engineering and Applications (ICIEA). IEEE Xplore, p. 184-188 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electronic data interchange
Computer aided manufacturing
Automotive industry
Joining
Computer aided design
2017

Development and manufacturing process optimization of mechatronics products by innovative key performance indicators

Hirz, M. & Ernst, M., 2017, MOTSP 2017 - International Conference Management of Technology – Step to Sustainable Production.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamic simulation of multi-plate clutches for automotive applications

Gradwohl, C., Belšak, A. & Hirz, M., 18 Apr 2017, ASim17-10. p. 1-17 17 p. ASim17-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Clutches
Computer simulation
Torque
Friction
Splines

Evaluation of signal processing effects on rotor position sensor systems for electric traction motors

Datlinger, C. & Hirz, M., 2017, Conference EAEC 2017.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Impact of Rotor Position Sensor Errors on Speed Controlled Permanent Magnetized Synchronous Machine

Gächter, J., Hirz, M. & Seebacher, R., 15 Dec 2017, 12th IEEE International Conference on Power Electronics and Drive Systems (IEEE PEDS 2017). p. 822-830

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimization of fail-operational automotive system and hardware architectures

Schnellbach, A. & Hirz, M., 2017, IQPC Conference ISO 26262.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Sustainable product development: provision of information in early automotive engineering phases

Brunner, H., Rossbacher, P. & Hirz, M., 2017, MOTSP 2017 - International Conference Management of Technology – Step to Sustainable Production.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Rotor Position Errors on the Dynamic Behavior of Field-Orientated Controlled PMSM

Gächter, J., Hirz, M. & Seebacher, R., 22 May 2017, Electric Machines and Drives Conference (IEMDC), 2017 IEEE International. IEEE. (ed.). 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

A new approach of a global knowledge-based engineering infrastructure

Salchner, M., Hirz, M., Stadler, S. & Ameye, J., 2016, Computer-Aided Design and Applciations.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2e-Emissionen verschiedener PKW-Technologien bei realen Nutzerverhalten im Produktlebenszyklus

Brunner, H., Hirz, M. & Fischer, P., 2016, Fortschritt-Berichte VDI Reihe 12 Nr. 799: 37. Internationales Wiener Motorensymposioum. Lenz, U-P. D. T. H-P. (ed.). Düsseldorf: VDI/VDE, Vol. 2. p. 429 - 446 18 p. (Fortschritt-Berichte VDI Reihe; vol. Reihe 12, no. 799).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Considering Influences of Sustainable Production in Early Automotive Engineering Phases

Brunner, H., Hirz, M. & Wurzer, A., 1 Jun 2016, Management of Technology Step to Sustainable Production 2016 - Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Efficient application of multi-core processors as substitute of the E-Gas (Etc) monitoring concept

Großmann, M., Hirz, M. & Fabian, J., 2016, 2016 SAI Computing Conference (SAI). London: Institute of Electrical and Electronics Engineers, p. 913-918

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Monitoring
Gases
Controllers
Automobiles

Enhanced knowledge-based 3D-CAD methods supporting automotive body-in-white production engineering

Hirz, M. & Rossbacher, P., 1 Jun 2016, Management of Technology - Step to Sustainable Production. Cosic, P. (ed.). Zagreb: Faculty of Transport and Traffic Sciences, University of Zagreb

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flexible Parameterization Strategies in Automotive 3D Vehicle Layout

Hirz, M. & Rossbacher, P., 2016, CAD and A Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Future trends in CAD – from the perspective of automotive industry

Hirz, M., Rossbacher, P. & Gavacova, J., 2016, CAD and A Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Generative Engineering Design methodology used for the development of surface-based components

Gavacova, J., Gulan, L., Forrai, M. & Hirz, M., 2016, CAD and A Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Integration of New Urban Vehicles in Transport Systems and Mobility Concepts

Brunner, H., Hirz, M. & Walzel, B., 26 Sep 2016, FISITA World Automotive Congress - Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

System Design Optimization of xEV-Axle Drives with Package Restrictions

Hofstetter, M., Hirz, M. & Ackerl, M., 26 Sep 2016, Proceedings of the FISITA 2016 World Automotive Congress. F2016-THBC-020

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Drive axles
Electric drives
Powertrains
Plug-in hybrid vehicles
Systems analysis

The FSI –an Example for Successful University –Industry Collaboration

Hirz, M., Pointner, A. & Deketele, A., 2016, INTED Conference 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Influence of Product Life Cycle Evaluation on Lightweight Design

Hirz, M., Brunner, H., Wurzer, A. & Schnöll, H. P., 26 Sep 2016, FISITA World Automotive Congress 2016 - Congress Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Analysis Methods in the Development Process of Mechatronic Drivetrain Systems with Special Focus on Automotive Software

Ernst, M., Erlachner, S., Hirz, M., Fabian, J. & Wotawa, F., 2015, Volume II. ., p. 63-68

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase

Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Proceedings International Conference Management of Technology - Step to Sustainable Production. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CO2 Reduction Potential of CFRP-Bodywork Concepts Considering Production and In-Use Phase

Schnöll, H. P., Brunner, H., Zottler, M., Hirz, M. & Ramsauer, C., 2015, Book of Abstracts - International Conference Management of Technology - Step to Sustainable Production. Zagreb: ., p. 39-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

ECO-Design in the Automotive Industry – Potentials and Challenges

Hirz, M. & Brunner, H., 2015, Proceedings International Conference Management of Technology - Step to Sustainable Production. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Framework of Knowledge Based Design in Minibus Skeleton Development

Hussein, H. M. A., Farouk, K. & Hirz, M., 2015, Industry Academia Collaboration. Cairo: IAC, p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimisation of Automotive Software Quality Management by Use of Analysis Methods in the Development Process of Mechatronic Systems

Ernst, M., Erlachner, S., Hirz, M. & Fabian, J., 2015, UR IAAST INT´L CONFERENCE. Universal Researchers in Science and Technology, p. 21-25

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Sensor Range Sensitivity of Predictive Energy Management in Plug-In Hybrid Vehicles

Hofstetter, M., Ackerl, M., Hirz, M., Kraus, H., Karoshi, P. & Fabian, J., 4 Nov 2015, 2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings. Institute of Electrical and Electronics Engineers, p. 1925-1932 8 p. 7320891

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Plug-in hybrid vehicles
Energy management
Sensors
Hybrid powertrains
Torque control

The Potential of Relational Database Framework Supporting Knowledge-Based Design

Viana Alvarez, I., Stadler, S., Hirz, M. & Rossbacher, P., 2015, (Accepted/In press) TMT 2015. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Aktuelle Forschungsthemen und innovative Trends der Elektromobilität in Österreich

Fabian, J., Brunner, H., Hirz, M., Wieland, T., Schmautzer, E., Fickert, L., Wegleiter, H., Slupetzky, W. & Schmied, R., 2014, (Accepted/In press) Innehalten und Ausblick: Effektivität und Effizienz für die Energiewende. Graz: Technische Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Anforderungen an das Fahrzeug für die multimodale Mobilität der Zukunft

Brunner, H., Hirz, M. & Fabian, J., 2014, Grazer Symposium Virtuelles Fahrzeug. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A novel approach of aerodynamic optimization on long-distance transportation trucks

Stadler, S. & Hirz, M., 2014, FISITA 2014 World Congress. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Evaluation of Angular Sensor Systems for Rotor Position Sensing of Automotive Electric Drives

Gächter, J., Fabian, J., Hirz, M., Schmidhofer, A. & Lanzenberger, H., 2014, (Accepted/In press) Smart Systems for Safe, Clean and Automated Vehicles. Berlin: VDI/VDE

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Future Trends of Advanced Power Electronics and Control Systems for Electric Vehicles

Fabian, J., Gächter, J. & Hirz, M., 2014, (Accepted/In press) Smart Systems for Safe, Clean and Automated Vehicles. Berlin: VDI/VDE

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Innovative Analysemethoden elektrifizierter Antriebsstränge zukünftiger Fahrzeuge

Ernst, M., Fabian, J. & Hirz, M., 2014, Symposium Energieinnovation. ., p. 408-408

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Life Cycle Assessment of urban mobility

Brunner, H., Hirz, M., Maurer, P. & Fabian, J., 2014, FISITA World Automotive Congress. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Measurement Systems in Battery-Electric and Hybrid Cars

Fabian, J., Lex, C., Hirz, M. & Brunner, H., 2014, (Accepted/In press) Intelligent transport to solve our future mobility, safety and environmental challenges. Curran Associates, Inc

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric batteries
Railroad cars
Propulsion
Sensors
Ground vehicles

State of the Art and Future Trends of Electric Drives and Power Electronics for Automotive Engineering

Fabian, J., Hirz, M. & Krischan, K., 2014, (Accepted/In press) SAE World Congress. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The potential of new vehicle concepts for transport optimization and GHG emission reduction in urban areas

Brunner, H. & Hirz, M., 2014, (Accepted/In press) Sustainable Materials/Manufacturing. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review