• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output 1992 2020

Filter
Poster
2019

Hot deformation behavior of a precipitate free Ni-based superalloy

Godavarthy Anantha Venkata, R. K. P., Lizzi, F., Schaden, G., Stanojevic, A., Stockinger, M., Sommadossi, S. & Poletti, M. C., 6 Aug 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Integrated contactless temperature-control for Electron Beam Additive Manufacturing

Theuermann, D., Pixner, F. & Enzinger, N., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

2018

Aluminiumpaneele für thermisch aktive Gebäudefassaden

Eckhard, R., Auer, P., Stern, T., Schober, H., Brandl, D. & Domitner, J., 2018.

Research output: Contribution to conferencePosterResearch

Electron beam welding of wear-resistant steels

Schneider, C., Ernst, W., Vallant, R. & Enzinger, N., 12 Jul 2018.

Research output: Contribution to conferencePosterResearch

Experimentelle Untersuchung und statistische Analyse wesentlicher Prozessparameter beim Stanznieten von 6xxx Aluminiumblechen

Hönsch, F., Domitner, J., Sommitsch, C. & Götzinger, B., 2018.

Research output: Contribution to conferencePosterResearch

Force-Controlled Friction Riveting - A Hybrid Joining Process

Pina Cipriano, G. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Joining
Friction
Aluminum

Modelling Material Flow in Friction Riveting of Polymeric Materials

Pina Cipriano, G. F., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Riveting
Rivets
Friction
Polymers
Plastic deformation

Modelling the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Krumphals, A., Lasnik, M., Wang, P., Kumar, S. & Poletti, M. C., 2018.

Research output: Contribution to conferencePosterResearch

On the feasibility of Friction Surfacing as an Additive Manufacturing technique

Belei Feliciano, C. A., 21 Sep 2018.

Research output: Contribution to conferencePosterResearchpeer-review

3D printers
Hard facing
Friction
Deposition rates
Fusion reactions
2017

Ermittlung von Materialparameter für Umformverfahren

Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Joining of steel and aluminium sheets by CMT process using a local zinc coating

Fritsch, S. & Stummer, M., 24 Jan 2017.

Research output: Contribution to conferencePosterResearch

Rotary Friction Welding of Molybdenum Components

Stütz, M., Pixner, F., Wagner, J., Reheis, NI., Raiser, E., Kestler, H. & Enzinger, N., 30 May 2017.

Research output: Contribution to conferencePosterResearch

Thermo-mechanical Damage Models of Quenched and Tempered Carbon Steel for Railway Wheels

Enzinger, N. & Maier, K., May 2017.

Research output: Contribution to conferencePosterResearch

Carbon steel
Wheels
Brakes
Residual stresses
Temperature
2016

Characterization of Electron Beam Welded Copper Using Plasma Spraying for Filler Metal Application

Stütz, M., Aumayr, A., Stummer, M., Voglreiter, C. M. & Enzinger, N., 30 Sep 2016.

Research output: Contribution to conferencePosterResearch

Filler metals
Plasma spraying
Electron beams
Welds
Copper

Combination of microstructural investigation and simulation during the heat treatment of a creep resistant 11% Cr-steel

Gsellmann, B., Halici, D., Albu, M., Beal, C. & Sonderegger, B., 1 Jun 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Corrosion behavior of ZK40 alloys modified with Gd, Nd, Y or CaO using potentiodynamic polarization curves and SKPFM

Buzolin, R. H., MOHEDANO, M., Mendis, C. L., MINGO, B., BLAWERT, C., Tolnai, D., Pinto, H. C., Kainer, K. U. & Hort, N., 8 Jun 2016.

Research output: Contribution to conferencePosterResearch

Dissimilar electron beam welds of nickel base alloy A625 with a 9% Cr-steel for high temperature applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 1 May 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Electron Beam Welding of TZM Sheets

Stütz, M., Oliveira, D., Rüttinger, M., Reheis, N., Kestler, H. & Enzinger, N., 2 Jun 2016.

Research output: Contribution to conferencePosterResearch

Influence of different welding processes on the mechanical properties of structural steel S960

Schneider, C., Enzinger, N., Vallant, R., Ernst, W., Staufer, H. & Schnitzer, R., 1 Jun 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

In-situ Characterization of Hydrogen Absorption in Nanoporous Palladium by Dilatometry and Resistometry

Steyskal, E-M., Wiednig, C. A., Enzinger, N. & Würschum, R., 2016.

Research output: Contribution to conferencePosterResearch

In Situ Phase Investigations of X20Cr13 High Cr Steel

Mitsche, S., Plesiutschnig, E. & Sommitsch, C., 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Temperature field evolution during flash-butt welding of railway rails

Weingrill, L. A., Krutzler, J. & Enzinger, N., 1 Jun 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Umsetzung nachhaltigen Bauens durch optimierte Projektsteuerungsprozesse und integrale Gebäudehüllen (UNAB) – AP2

Schober, H., Brandl, D., Zellinger, M., Mach, T., Boskovic, V., Banozic, M., Stavric, M. & Englhardt, O., 16 Jun 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Validierung Computertomografie-Reinheitsgradmessung mittels automatisierter Lichtmikroskopie

Decker, C., Schützenhöfer, W., Plank, B., Plesiutschnig, E. & Sommitsch, C., 10 May 2016.

Research output: Contribution to conferencePosterResearch

2015

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Enzinger, N., Haas, F. & Pfanner, S., 2015.

Research output: Contribution to conferencePosterResearch

Open Access
File

Filler Material Insertion for Electron Beam Welding of Thick Walled Copper Components

Voglreiter, C. M., Stütz, M. & Enzinger, N., 28 Sep 2015.

Research output: Contribution to conferencePosterResearch

Improved evaluation of the instrumented Charpy V-notch test

Krenmayr, B., Schuler, M. & Enzinger, N., 2015.

Research output: Contribution to conferencePosterResearch

Relation between prior austenite grain size creep rupture life and pore evolution of 9% Cr steels

Plesiutschnig, E., Dikovits, M., Prodinger, D., Sommitsch, C., Wallner, S. & Zeiler, G., 2015.

Research output: Contribution to conferencePosterResearch

2014

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Experimental investigation and numerical simulation of resistance spot welding for residual stress evaluation of DP1000 steel

Pakkanen, J., Kicin, M. & Vallant, R., 2014.

Research output: Contribution to conferencePosterResearch

Friction Welding of TZM Components

Reheis, N., Tabernig, B., Kestler, H., Sigl, L. S., de Pretis, D. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Influence of nickel on the mechanical properties of a creep resistant CB2 flux cored wire weld metal

Baumgartner, S., Schuler, M., Schnitzer, R. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Know-how and process development for components used in (A)USC power plants

Lochbichler, C., Füreder-Kitzmüller, F., Zeiler, G., Paul, S., Klarner, J., Vogl, T., Baumgartner, S., Schnitzer, R., Hanus, R., Schmitz-Niederau, M., Kreuzer-Zagar, D., Schrammhauser, S., Trenkmann, U., Schuler, M. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePosterResearch

Simulation of microstructure and modelling of mechanical properties of CB2 flux cored wires weld metal

Schuler, M., Ramskogler, C., Baumgartner, S., Schnitzer, R. & Enzinger, N., 2014.

Research output: Contribution to conferencePosterResearch

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface Structuring of Biomaterials by Electron Beam Technique

Stütz, M., Warchomicka, F. G., Ramskogler, C., Poletti, M. C. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Systematic Materials Selection for Warehouse Shuttle Vehicles

Aigner, M., Caliskanoglu, O. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2014.

Research output: Contribution to conferencePosterResearch

Werkstoffwahl für einen Rohrbündelwärmetauscher mittels CES

Kandutsch, P. G., Brillinger, M., Dobretsberger, J., Reiner, C. W. & Poletti, M. C., 2014.

Research output: Contribution to conferencePosterResearch

2013

Assessing the Surface Cracking Susceptibility during Continuous Casting of in-situ Melted and Solidified Steels

Caliskanoglu, O., Ilie, S., Beal, C. & Sommitsch, C., 2013.

Research output: Contribution to conferencePosterResearch

Elektronenstrahlschweißen dickwandiger Gussbauteile aus CB2 und Alloy 625

Wiednig, C. A., Enzinger, N., Beal, C. & Lochbichler, C., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Kleben von Schneidkeramik-Sägezähnen auf ein Stahlsägeblatt / Grundlagenuntersuchungen und Potential

Moser, F., Vallant, R. & Hampel, S., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Lichtbogenspritzen von Metallschichten für den Verschleiß- und Korrosionsschutz

Jesse, M., Schröttner, H. & Vallant, R., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File