Institut für Werkstoffkunde, Fügetechnik und Umformtechnik (3030)

  • 8010

    Kopernikusgasse 24 Graz

    Österreich

Forschungsoutput 1992 2020

2020

In-situ characterization of continuous dynamic recrystallization during hot torsion of an Al–Si–Mg alloy

Canelo-Yubero, D., Kovács, Z., Simonet Fotso, J. F. T., Tolnai, D., Schell, N., Groma, I. & Poletti, C., 5 Mai 2020, in : Journal of Alloys and Compounds. 822, 153282.

Publikation: Beitrag in einer FachzeitschriftShort communicationForschungBegutachtung

Dynamic recrystallization
Synchrotron radiation
Torsional stress
Restoration
Textures

Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance

Buzolin, R. H., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 12 Jan 2020, in : Materials and corrosion. S. 1-13 13 S.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Magnesium alloys
Corrosion resistance
corrosion
magnesium
Spectroelectrochemistry
2019

4-D Printing of NiTi Shape Memory Alloys

Paiotti Marcondes Guimaraes, R., Pixner, F., Trimmel, G. & Amancio-Filho, S. T., 26 Sep 2019.

Publikation: KonferenzbeitragPosterForschung

Open Access
Datei
Shape memory effect
Printing
Titanium
Nickel
3D printers

A continuous dynamic recrystallization model to describe the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Lasnik, M., Krumphals, A. & Poletti, M. C., 14 Aug 2019, in : Journal of Physics: Conference Series. 1270, 1, 012048.

Publikation: Beitrag in einer FachzeitschriftKonferenzartikelForschungBegutachtung

Open Access
microstructure
strain rate
grain boundaries
titanium alloys
recovery
3D printers
Polymers
Metals
Aircraft
Substrates

A dissipation potential approach to describe flow instability in alloys during hot deformation

Wang, P., Hogrefe, K., PIOT, D., MONTHEILLET, F. & Poletti, M. C., 13 Jan 2019.

Publikation: KonferenzbeitragAbstractForschung

Datei
dissipation
continuum mechanics
microstructure
nonequilibrium thermodynamics
plastic flow

An analytical solution for temperature distribution in fillet arc welding based on an adaptive function

Nasiri, M. B. & Enzinger, N., 8 Mär 2019, in : Welding in the world. 63, 2, S. 409-419 11 S.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Electric arc welding
Welding
Temperature Distribution
Analytical Solution
Welds

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, in : Materials. 12, 11, 15 S., 1798.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Datei
Boron
Dimensional stability
Silicon nitride
Mechanical properties
Eutectics

Basic alloy development of low-transformationtemperature fillers for AISI 410 martensitic stainless steel

Hosseini, S. A., Gheisari, K., Moshayedi, H., Warchomicka, F. G. & Enzinger, N., 22 Okt 2019, in : Science and technology of welding and joining. 2019, 8 S.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets

Schuster, P. A., Österreicher, J. A., Kirov, G., Sommitsch, C., Kessler, O. & Mukeli, E., 1 Mär 2019, in : Metals. 9, 3, 305.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Aluminum sheet
Stamping
Aging of materials
Compression testing
Crashworthiness

CMT additive manufacturing of a high strength steel alloy for application in crane construction

Plangger, J., Schabhüttl, P., Vuherer, T. & Enzinger, N., 1 Jun 2019, in : Metals. 9, 6, 14 S., 650.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
3D printers
High strength alloys
Alloy steel
Cranes
High strength steel

Continuous dynamic recrystallization during hot torsion of an aluminum alloy.

Poletti, M. C., Simonet-Fotso, T., Halici, D., Canelo-Yubero, D., Montheillet, F., Piot, D., Kovács, Z., Schell, N. & Tolnai, D., 14 Aug 2019, in : Journal of Physics: Conference Series. 1270, 1, 012049.

Publikation: Beitrag in einer FachzeitschriftKonferenzartikelForschungBegutachtung

Open Access
aluminum alloys
torsion
misalignment
wrought alloys
microstructure

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . S. 312-327

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, in : AIP Conference Proceedings. 2113, S. 050002-1-6

Publikation: Beitrag in einer FachzeitschriftKonferenzartikelForschungBegutachtung

Open Access

Design of a roll test bench for investigating thermo-mechanical tool wear

Domitner, J., Stern, T., Leitner, A. T., Aigner, M., Paar, A., Trickl, T., Elizondo, L. & Sommitsch, C., 2019, Proceedings of the TOOLING 2019 Conference.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. S. 147-1-6

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschung

Development of the UNAB facade

Schober, H., Boskovic, V., Auer, P., Brandl, D. & Mach, T., 2019, Sustainable Design Process & Integrated Facades. Kreiner, H. & Passer, A. (Hrsg.). Graz: Verlag der Technischen Universität Graz, S. 76-87

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Buch/BerichtForschung

Digital Entrepreneurship: Geschäftsaufbau und Geschäftstätigkeit im digitalen Zeitalter

Poandl, E. M. & Glinik, M., 3 Apr 2019, WING-Business, 52. Jahrgang, 01/19, S. 32-37.

Publikation: Beitrag in Zeitung/MagazinArtikelForschungBegutachtung

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, in : Metals. 9, 6, 672.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

Kaar, S., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 19 Okt 2019, in : Metals. 9, 10, 1122.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Steel
Manganese
Martensite
Austenite
Quenching

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mär 2019, in : Materials. 12, 6, 13 S., 930.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Datei
Preheating
Residual stresses
Melting
Hatches
Lasers

Effect of the reuse of powder on material properties of Ti6Al4V processed by SLM

Meier, B., Skalon, M., Warchomicka, F. G., Belei Feliciano, C. A., Görtler, M., Kaindl, R. & Sommitsch, C., Jul 2019, in : AIP Conference Proceedings. 2113, 1, 150006.

Publikation: Beitrag in einer FachzeitschriftKonferenzartikelForschungBegutachtung

reuse
titanium
powders
titanium alloys
tensile strength

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. S. paper nr. 26

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

casts
heat treatment
Heat treatment
microstructure
Microstructure

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Kaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, S. 70-84 15 S.

Publikation: Beitrag in Zeitung/MagazinArtikelForschungBegutachtung

Steel
Austenite
Quenching
Phase transitions
Martensite

Elektronenstrahl-Schweißungen eines martensitischen Chromstahls mit lokalem Legieren

Rabl, A., Pixner, F., Duarte, B., Beal, C. & Enzinger, N., Mär 2019, in : Schweiss- & Prüftechnik. 72, 3/4, S. 54-60

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Fatigue crack growth in full-scale railway axles – Influence of secondary stresses and load sequence effects

Rieger, M., Moser, C., Brunnhofer, P., Simunek, D., Weber, F. J., Deisl, A., Gänser, H. P., Pippan, R. & Enzinger, N., 1 Jan 2019, in : International Journal of Fatigue. 11 S., 105360.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Fatigue Crack Growth
Axles
Railway
Fatigue crack propagation
Wheel

Fracture behavior of welded T-joints of aluminum alloy EN AW-6063

Silvayeh, Z., Domitner, J., Grünbart, F., Götzinger, B. & Sommitsch, C., 2019, (Eingereicht) Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Friction Riveting – Single-phase Process Variant

Pina Cipriano, G., Vilaça, P. & Amancio-Filho, S. T., 2019.

Publikation: KonferenzbeitragPosterForschungBegutachtung

Riveting
Rivets
Friction
Joining
Plastic deformation

Gas Metal Arc Root Welding of Pearlitic Rails Using Magnetic Arc Deflection

Weingrill, L. A., Schwald, M., Faustmann, C., Frühstück, D. & Enzinger, N., Jan 2019, in : MATEC Web of Conferences. 269, 8 S., 02001.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access

Hot deformation behavior of a precipitate free Ni-based superalloy

Godavarthy Anantha Venkata, R. K. P., Lizzi, F., Schaden, G., Stanojevic, A., Stockinger, M., Sommadossi, S. & Poletti, M. C., 6 Aug 2019.

Publikation: KonferenzbeitragPosterForschungBegutachtung

HOT DUCTILITY BEHAVIOR OF A CONTINUOUSLY CAST Ti-Nb MICROALLOYED STEEL

Hoflehner, C., Beal, C., Sommitsch, C., Six, J. & Ilie, S., 15 Nov 2019, METAL 2019: 28th International Conference on Metallurgy and Materials ; proceedings. Ostrava: TANGER Ltd., Ostrava, S. 84 - 89 6 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Ductility
Testing
Grain boundary sliding
Steel
Continuous casting

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Publikation: KonferenzbeitragPosterForschung

Improving the integrity and the microstructural features of electron beam welds of a creep-resistant martensitic steel by local (de-)alloying

Rabl, A., Pixner, F., Duarte, B., Blatesic, D., Beal, C. & Enzinger, N., 8 Mär 2019, in : Welding in the world. 63, 2, S. 575-582 8 S.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Martensitic steel
Steel
Alloying
Electron beams
Creep

Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties

Skalon, M., Görtler, M., Meier, B., Arneitz, S., Urban, N., Mitsche, S., Huber, C., Franke, J. & Sommitsch, C., 29 Dez 2019, in : Materials. 13, 1, 14 S., 139.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Magnets
Printing
Magnetic properties
Powders
Demagnetization

Influence of the focus wobbling technique on the integrity and the properties of electron beam welded MarBN steel

Rabl, A., Pixner, F., Blatesic, D., Béal, C. & Enzinger, N., 6 Jan 2019, in : Welding in the world. 63, 3, S. 715-724

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., Mär 2019, in : Metals. 9, 3, 353.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Steel
Manganese
Plasticity
Quenching
Hardness

In Situ Formation of TiB2 in Fe-B System with Titanium Addition and Its Influence on Phase Composition, Sintering Process and Mechanical Properties

Skalon, M., Hebda, M., Schrode, B., Resel, R., Kazior, J. & Sommitsch, C., 13 Dez 2019, in : Materials. 12, 12 S., 4188.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Datei
Borides
Titanium
Phase composition
Boron
Sintering

In-situ synchrotron X-ray diffraction of Ti-6Al-4V during thermomechanical treatment in the beta field

Warchomicka, F., Canelo-Yubero, D., Zehetner, E., Requena, G., Stark, A. & Poletti, C., 1 Aug 2019, in : Metals. 9, 8, 14 S., 862.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access
Thermomechanical treatment
Synchrotrons
Restoration
X ray diffraction
Strain rate

Integrated contactless temperature-control for Electron Beam Additive Manufacturing

Theuermann, D., Pixner, F. & Enzinger, N., 26 Sep 2019.

Publikation: KonferenzbeitragPosterForschung

Investigation of the fibre type influence on the energy desnity of the induction heating process through a semi-analytic method

Forstner, T., Sommitsch, C. & Fischer, F., 2019, Procedia Manufacturing 37 : Science Direct, Elsevier. S. 286-293 37

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Induction heating
Carbon fibers
Heating
Welding
Fibers

Investigation of the influence of the welding speed and current on the parameters of the adaptive function

Nasiri, M. B. & Enzinger, N., 2019, Mathematical Modelling of Weld Phenomena 12. Graz: Verlag der Technischen Universität Graz, S. 1-20

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Open Access
Welding
Welds
Experimental Data
Finite element method
Stainless Steel

Layered Structures of Ti-6Al-4V Alloy and Metal Matrix Composites on Its Base Joint by Diffusion Bonding and Friction Welding

Prikhodko, S. V., Savvakin, D. G., Markovsky, P. E., Stasiuk, O. O., Enzinger, N., Deley, F., Flipo, B., Shirzadi, A., Davies, H. M., Davies, P. D., Penny, J., Bozhilov, K. & Ivasishin, O. M., 2019, in : Microscopy and microanalysis. 25, S2, S. 812-813

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Open Access

Mathematical Modelling of Weld Phenomena 12

Sommitsch, C., Enzinger, N. & Mayr, P., 2019, Graz: Verlag der Technischen Universität Graz. 1074 S.

Publikation: Buch/Bericht/KonferenzbandBuch (Autorenwerk)ForschungBegutachtung

Open Access

Methods for the measurement of ferrite content in multipass duplex stainless steel welds

Putz, A., Althuber, M., Zelić, A., Westin, E. M., Willidal, T. & Enzinger, N., 1 Jun 2019, in : Welding in the world. 63, 4, S. 1075-1086 12 S.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Stainless Steel
Image analysis
Ferrite
Welds
Stainless steel

Microstructurally Based Modelling of Creep Deformation of Martensitic Steels

Sonderegger, B., Krenmayr, B., Riedlsperger, F. K., Fercher, B., Niederl, B. & Sommitsch, C., Okt 2019, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials 2019: Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials. ASM International, S. 360-369 10 S.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Microstructure development of molybdenum during rotary friction welding

Stütz, M., Buzolin, R. H., Pixner, F., Poletti, M. C. & Enzinger, N., 2019, in : Materials characterization. 151, S. 506-518 13 S.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

friction welding
Friction welding
Molybdenum
molybdenum
Welding

Modeling single-side inflating of flow channels in roll-bonded aluminum panels

Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, (Eingereicht) Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in einem KonferenzbandForschungBegutachtung

Non-destructive microstructural analysis by electrical conductivity: Comparison with hardness measurements in different materials

Sorger, G. L., Oliveira, J. P., Inácio, P. L., Enzinger, N., Vilaça, P., Miranda, R. M. & Santos, T. G., 1 Mär 2019, in : Journal of Materials Science and Technology. 35, 3, S. 360-368 9 S.

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Hardness
Eddy currents
Eddy current testing
Tungsten
Steel