• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output

2020

Analysis of Splitting and Martensitic Transformation of AlNi Intermetallic Obtained by Transient Liquid Phase Bonding

Poliserpi, M., Buzolin, R., Boeri, R., Poletti, C. & Sommadossi, S., 1 Jan 2020, In : Metallurgical and Materials Transactions / B. 51, p. 916–924

Research output: Contribution to journalArticleResearchpeer-review

Durability of Metal-Composite Friction Spot Joints under Environmental Conditions

Goushegir, S. M., Scharnagl, N., dos Santos, J. F. & Amancio-Filho, S. T., 4 Mar 2020, In : Materials. 13, 5, 20 p., 1144.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of processing conditions on the structural properties and corrosion behavior of TiO2-SiO2 multilayer coatings derived via the sol-gel method

Khosravi H, S., Veerapandiyan, V. K., Vallant, R. & Reichmann, K., 6 Apr 2020, In : Ceramics International.

Research output: Contribution to journalArticleResearchpeer-review

Electron Beam Structuring of Ti6Al4V: New Insights on the Metal Surface Properties Influencing the Bacterial Adhesion

Ferraris, S., Warchomicka, F., Iranshahi, F., LIA, RIMONDINI., Cochis, A. & Spriano, S., 15 Jan 2020, In : Materials. 13, 2, 11 p., 409.

Research output: Contribution to journalArticleResearchpeer-review

Impact resistance of metal-composite hybrid joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Feb 2020, In : Composite Structures. 233, 111754.

Research output: Contribution to journalArticleResearchpeer-review

In Situ Analysis of the Phase Transformation Kinetics in the β-Water-Quenched Ti-5Al-5Mo-5V-3Cr-1Zr Alloy during Ageing after Fast Heating

Paiotti Marcondes Guimaraes, R., Callegari, B., Warchomicka, F. G., Aristizabal, K., Soldera, F., Mücklich, F. & Pinto, H. C., 21 Feb 2020, In : Quantum Beam Science. 4, 1, p. 1-16 16 p., 12.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

In-situ characterization of continuous dynamic recrystallization during hot torsion of an Al–Si–Mg alloy

Canelo-Yubero, D., Kovács, Z., Simonet Fotso, J. F. T., Tolnai, D., Schell, N., Groma, I. & Poletti, C., 5 May 2020, In : Journal of Alloys and Compounds. 822, 153282.

Research output: Contribution to journalLetterResearchpeer-review

Low-velocity impact response of friction riveted joints for aircraft application

Borba, N. Z., Körbelin, J., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, In : Materials & Design. 186, 13 p., 108369.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Mechanical integrity of friction-riveted joints for aircraft applications

Borba, N. Z., Kötter, B., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, In : Composite Structures. 232, 111542.

Research output: Contribution to journalArticleResearchpeer-review

Microstructure investigation of duplex stainless steel welds using arc heat treatment technique

Putz, A., Hosseini, V. A., Westin, E. M. & Enzinger, N., 8 May 2020, In : Welding in the World. 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Numerical simulation of hybrid joining processes: self-piercing riveting combined with adhesive bonding

Potgorschek, L., Domitner, J., Hönsch, F., Sommitsch, C. & Kaufmann, S., 2020, In : Procedia Manufacturing. 47, p. 413-418

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Prediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfaces

Pereira Alessio, R., Manente André, N., Goushegir, S. M., dos Santos, J. F., Mazzaferro, J. A. E. & Amancio-Filho, S. T., 20 May 2020, In : Materials Today / Communications. 24, 9 p., 101205.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Preface - to the issue on BHM

Sommitsch, C., Hackl, G. & Hribernik, B., 14 Jan 2020, In : Berg- und hüttenmännische Monatshefte. 2020, 1, p. 1 2 p.

Research output: Contribution to journalEditorialResearch

Process-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)

Abibe, A. B., Sônego, M., Canto, L. B., dos Santos, J. F. & Amancio-Filho, S. T., 25 Feb 2020, In : Materials. 13, 5, 17 p., 1027.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Similar and dissimilar welds of ultrafine grained aluminium obtained by friction stir welding

Orłowska, M., Brynk, T., Hütter, A., Goliński, J., Enzinger, N., Olejnik, L. & Lewandowska, M., 10 Mar 2020, In : Materials Science and Engineering A. 777, 15 p., 139076.

Research output: Contribution to journalArticleResearchpeer-review

Stability of a Melt Pool during 3D-Printingof an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 10 Feb 2020, In : Materials. 13, 3, 14 p., 808.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 10 Feb 2020, In : Materials. 13, 14 p., 808.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Surface topographies on the micro and nanoscale of metal alloys for tissue regeneration

Warchomicka, F. G., 1 Jan 2020, Nanostructured Biomaterials for Regenerative Medicine. Woodhead Publishing, p. 315-336

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance

Buzolin, R. H., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 12 Jan 2020, In : Materials and corrosion. p. 1-13 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2019

4-D Printing of NiTi Shape Memory Alloys

Paiotti Marcondes Guimaraes, R., Pixner, F., Trimmel, G. & Amancio-Filho, S. T., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Open Access
File

A continuous dynamic recrystallization model to describe the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Lasnik, M., Krumphals, A. & Poletti, M. C., 14 Aug 2019, In : Journal of Physics: Conference Series. 1270, 1, 012048.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

A dissipation potential approach to describe flow instability in alloys during hot deformation

Wang, P., Hogrefe, K., PIOT, D., MONTHEILLET, F. & Poletti, M. C., 13 Jan 2019.

Research output: Contribution to conferenceAbstractResearch

File

A flow instability criterion for alloys during hot deformation

Wang, P., Hogrefe, K., Piot, D., Montheillet, F. & Poletti, M. C., 1 Jan 2019, In : Procedia Manufacturing. 37, p. 319-326 8 p.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

An analytical solution for temperature distribution in fillet arc welding based on an adaptive function

Nasiri, M. B. & Enzinger, N., 8 Mar 2019, In : Welding in the World. 63, 2, p. 409-419 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

An investigation of the Ultrasonic Joining process parameters effect on the mechanical properties of metalcomposite hybrid joints

Pina Cipriano, G. F., Blaga, L. A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 2019, IIW Bratislava - Conference Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2019, European Conference on Heat Treatment ECHT 2019.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Basic alloy development of low-transformationtemperature fillers for AISI 410 martensitic stainless steel

Hosseini, S. A., Gheisari, K., Moshayedi, H., Warchomicka, F. G. & Enzinger, N., 22 Oct 2019, In : Science and technology of welding and joining. 2019, 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets

Schuster, P. A., Österreicher, J. A., Kirov, G., Sommitsch, C., Kessler, O. & Mukeli, E., 1 Mar 2019, In : Metals. 9, 3, 305.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

CMT additive manufacturing of a high strength steel alloy for application in crane construction

Plangger, J., Schabhüttl, P., Vuherer, T. & Enzinger, N., 1 Jun 2019, In : Metals. 9, 6, 14 p., 650.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Continuous dynamic recrystallization during hot torsion of an aluminum alloy.

Poletti, M. C., Simonet-Fotso, T., Halici, D., Canelo-Yubero, D., Montheillet, F., Piot, D., Kovács, Z., Schell, N. & Tolnai, D., 14 Aug 2019, In : Journal of Physics: Conference Series. 1270, 1, 012049.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Corrosion behavior of metal–composite hybrid joints: Influence of precipitation state and bonding zones

André, N. M., Boualib, A., Maawad, E., Staron, P., Santos, J. F. D., Zheludkevich, M. L. & Amancio-Filho, S. T., 1 Sep 2019, In : Corrosion science. 158, 108075.

Research output: Contribution to journalArticleResearchpeer-review

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CP-FE modelling and experimental investigation of gradient structured Al wires

Pourbashiri, M., Poletti, M. C., Sedighi, M. & Sommitsch, C., 26 Sep 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, In : AIP Conference Proceedings. 2113, p. 050002-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Design of a roll test bench for investigating thermo-mechanical tool wear

Domitner, J., Stern, T., Leitner, A. T., Aigner, M., Paar, A., Trickl, T., Elizondo, L. & Sommitsch, C., 2019, Proceedings of the TOOLING 2019 Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Development of the UNAB facade

Schober, H., Boskovic, V., Auer, P., Brandl, D. & Mach, T., 2019, Sustainable Design Process & Integrated Facades. Kreiner, H. & Passer, A. (eds.). Graz: Verlag der Technischen Universität Graz, p. 76-87

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Digital Entrepreneurship: Geschäftsaufbau und Geschäftstätigkeit im digitalen Zeitalter

Poandl, E. M. & Glinik, M., 3 Apr 2019, WING-Business, 52. Jahrgang, 01/19, p. 32-37.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

Kaar, S., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 19 Oct 2019, In : Metals. 9, 10, 1122.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Effect of the reuse of powder on material properties of Ti6Al4V processed by SLM

Meier, B., Skalon, M., Warchomicka, F. G., Belei Feliciano, C. A., Görtler, M., Kaindl, R. & Sommitsch, C., Jul 2019, In : AIP Conference Proceedings. 2113, 1, 150006.

Research output: Contribution to journalConference articleResearchpeer-review

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Kaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, p. 70-84 15 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Elektronenstrahl-Schweißungen eines martensitischen Chromstahls mit lokalem Legieren

Rabl, A., Pixner, F., Duarte, B., Beal, C. & Enzinger, N., Mar 2019, In : Schweiss- & Prüftechnik. 72, 3/4, p. 54-60

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of joint formation and mechanical performance of the AA7075-T6/CFRP spot joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Mar 2019, In : Materials. 16, 6, 891.

Research output: Contribution to journalArticleResearchpeer-review

Open Access