• 8010

    Kopernikusgasse 24 Graz

    Austria

Research Output

Filter
Article
2021

In situ assessment of isochronal phase transformations in a lamellar Ti–5Al–5Mo-5V–3Cr–1Zr alloy using synchrotron X-ray diffraction

Callegari, B., Campo, L., Aristizabal, K., Guitar, M. A., Warchomicka, F. G., Coelho, R. S., Brito, P. P., Soldera, F., Mücklich, F. & Cavalcanti Pinto, H., 5 Feb 2021, In : Journal of Alloys and Compounds. 853, 157105.

Research output: Contribution to journalArticle

Refinement of the Ti-17 microstructure after hot deformation: Coupled mesoscale model

Buzolin, R. H., Canelo Yubero, D., Warchomicka, F. G., Lasnik, M., Krumphals, A. & Poletti, M. C., 7 Jan 2021, In : Materials Science and Engineering / A. 800, 19 p., 140268.

Research output: Contribution to journalArticle

2020

Analysis of Splitting and Martensitic Transformation of AlNi Intermetallic Obtained by Transient Liquid Phase Bonding

Poliserpi, M., Buzolin, R., Boeri, R., Poletti, C. & Sommadossi, S., 1 Jan 2020, In : Metallurgical and Materials Transactions / B. 51, p. 916–924

Research output: Contribution to journalArticle

An investigation on micro-hardness, micro-structure and ductility of clad layer in copper clad aluminum wire under multi stage-NCWD

Sichani, F. F., Rahnama, S., Raghebi, M. & Sommitsch, C., 4 May 2020, In : Materials Research Express. 7, 5, 056501.

Research output: Contribution to journalArticle

Open Access
Open Access

Durability of Metal-Composite Friction Spot Joints under Environmental Conditions

Goushegir, S. M., Scharnagl, N., dos Santos, J. F. & Amancio-Filho, S. T., 4 Mar 2020, In : Materials. 13, 5, 20 p., 1144.

Research output: Contribution to journalArticle

Open Access

Effect of processing conditions on the structural properties and corrosion behavior of TiO2-SiO2 multilayer coatings derived via the sol-gel method

Khosravi H, S., Veerapandiyan, V. K., Vallant, R. & Reichmann, K., 1 Aug 2020, In : Ceramics International. 46, 11, p. 17741-17751 11 p.

Research output: Contribution to journalArticle

Effect of Strain Rate on the Hot Ductility Behaviorof a Continuously Cast Ti–Nb Microalloyed Steel

Melo Gontijo, M., Hoflehner, C., Estermann, P., Ilie, S., Six, J. & Sommitsch, C., 10 Jul 2020, In : Steel Research International. 2020, 10 p.

Research output: Contribution to journalArticle

Open Access

Electron Beam Structuring of Ti6Al4V: New Insights on the Metal Surface Properties Influencing the Bacterial Adhesion

Ferraris, S., Warchomicka, F., Iranshahi, F., Lia, R., Cochis, A. & Spriano, S., 15 Jan 2020, In : Materials. 13, 2, 11 p., 409.

Research output: Contribution to journalArticle

Open Access

Impact resistance of metal-composite hybrid joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Feb 2020, In : Composite Structures. 233, 111754.

Research output: Contribution to journalArticle

In Situ Analysis of the Phase Transformation Kinetics in the β-Water-Quenched Ti-5Al-5Mo-5V-3Cr-1Zr Alloy during Ageing after Fast Heating

Paiotti Marcondes Guimaraes, R., Callegari, B., Warchomicka, F. G., Aristizabal, K., Soldera, F., Mücklich, F. & Pinto, H. C., 21 Feb 2020, In : Quantum Beam Science. 4, 1, p. 1-16 16 p., 12.

Research output: Contribution to journalArticle

Open Access

Low cycle fatigue behavior of AZ31B extrusion at elevated temperatures

Jabbari, A. H., Sedighi, M., Jahed, H. & Sommitsch, C., 2020, In : International Journal of Fatigue. 139, 105803.

Research output: Contribution to journalArticle

Low cycle fatigue behavior of magnesium matrix nanocomposite at ambient and elevated temperatures

Jabbari, A. H., Shafiee Sabet, A., Sedighi, M., Jahed, H. & Sommitsch, C., 2020, In : Materials Science and Engineering / A. 793, 13 p., 139890.

Research output: Contribution to journalArticle

Open Access

Low-velocity impact response of friction riveted joints for aircraft application

Borba, N. Z., Körbelin, J., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, In : Materials & Design. 186, 13 p., 108369.

Research output: Contribution to journalArticle

Open Access

Mechanical integrity of friction-riveted joints for aircraft applications

Borba, N. Z., Kötter, B., Fiedler, B., dos Santos, J. F. & Amancio-Filho, S. T., 15 Jan 2020, In : Composite Structures. 232, 111542.

Research output: Contribution to journalArticle

Mechanical properties and fracture modes of thin butt-joined aluminum-steel blanks for automotive applications

Silvayeh, Z., Domitner, J., Sommitsch, C., Hartmann, M., Karner, W. & Götzinger, B., 2020, In : Journal of Manufacturing Processes. 59, p. 456-467

Research output: Contribution to journalArticle

Open Access

Microstructure investigation of duplex stainless steel welds using arc heat treatment technique

Putz, A., Hosseini, V. A., Westin, E. M. & Enzinger, N., 1 Jul 2020, In : Welding in the World. 64, 7, p. 1135-1147 13 p.

Research output: Contribution to journalArticle

Open Access

Modeling the Failure Behavior of Self-Piercing Riveting Joints of 6xxx Aluminum Alloy

Hönsch, F., Domitner, J., Sommitsch, C. & Götzinger, B., 2020, In : Journal of Materials Engineering and Performance. 29, p. 4888–4897

Research output: Contribution to journalArticle

Open Access

Modelling the Competitive Growth of Primary, Allotriomorphic, and Secondary Alpha in Ti-6Al-4V

Buzolin, R. H., Weiß, D., Krumphals, A., Lasnik, M. & Poletti, M. C., 1 Aug 2020, In : Metallurgical and materials transactions / A. 51, 8, p. 3967-3980 14 p.

Research output: Contribution to journalArticle

Open Access

Prediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfaces

Pereira Alessio, R., Manente André, N., Goushegir, S. M., dos Santos, J. F., Mazzaferro, J. A. E. & Amancio-Filho, S. T., Sep 2020, In : Materials Today / Communications. 24, 9 p., 101205.

Research output: Contribution to journalArticle

Open Access

Process-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)

Abibe, A. B., Sônego, M., Canto, L. B., dos Santos, J. F. & Amancio-Filho, S. T., 25 Feb 2020, In : Materials. 13, 5, 17 p., 1027.

Research output: Contribution to journalArticle

Open Access

Sechs Monate in Schweden ... ein Kurzbericht

Enzinger, N., Jul 2020, Schweiss- & Prüftechnik, 07/08, p. 122-123 2 p.

Research output: Contribution to specialist publicationArticle

Similar and dissimilar welds of ultrafine grained aluminium obtained by friction stir welding

Orłowska, M., Brynk, T., Hütter, A., Goliński, J., Enzinger, N., Olejnik, L. & Lewandowska, M., 10 Mar 2020, In : Materials Science and Engineering / A. 777, 15 p., 139076.

Research output: Contribution to journalArticle

Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness

Skalon, M., Meier, B., Gruberbauer, A., Amancio-Filho, S. T. & Sommitsch, C., 1 Feb 2020, In : Materials. 13, 3, 14 p., 808.

Research output: Contribution to journalArticle

Open Access
File

Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance

Buzolin, R. H., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 12 Jan 2020, In : Materials and corrosion. 71, 3, p. 339-351 13 p.

Research output: Contribution to journalArticle

Open Access

Wire-Based Additive Manufacturing of Ti-6Al-4V Using Electron Beam Technique

Pixner, F., Warchomicka, F. G., Peter, P. R., Steuwer, A., Hörnqvist Colliander, M., Pederson, R. & Enzinger, N., Aug 2020, In : Materials. 13, 15, 3310.

Research output: Contribution to journalArticle

Open Access
2019
Open Access

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticle

Open Access
File

Basic alloy development of low-transformationtemperature fillers for AISI 410 martensitic stainless steel

Hosseini, S. A., Gheisari, K., Moshayedi, H., Warchomicka, F. G. & Enzinger, N., 22 Oct 2019, In : Science and technology of welding and joining. 2019, 8 p.

Research output: Contribution to journalArticle

Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets

Schuster, P. A., Österreicher, J. A., Kirov, G., Sommitsch, C., Kessler, O. & Mukeli, E., 1 Mar 2019, In : Metals. 9, 3, 305.

Research output: Contribution to journalArticle

Open Access

CMT additive manufacturing of a high strength steel alloy for application in crane construction

Plangger, J., Schabhüttl, P., Vuherer, T. & Enzinger, N., 1 Jun 2019, In : Metals. 9, 6, 14 p., 650.

Research output: Contribution to journalArticle

Open Access

Corrosion behavior of metal–composite hybrid joints: Influence of precipitation state and bonding zones

André, N. M., Boualib, A., Maawad, E., Staron, P., Santos, J. F. D., Zheludkevich, M. L. & Amancio-Filho, S. T., 1 Sep 2019, In : Corrosion science. 158, 108075.

Research output: Contribution to journalArticle

Digital Entrepreneurship: Geschäftsaufbau und Geschäftstätigkeit im digitalen Zeitalter

Poandl, E. M. & Glinik, M., 3 Apr 2019, WING-Business, 52. Jahrgang, 01/19, p. 32-37.

Research output: Contribution to specialist publicationArticle

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticle

Open Access

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

Kaar, S., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 19 Oct 2019, In : Metals. 9, 10, 1122.

Research output: Contribution to journalArticle

Open Access

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticle

Open Access
File

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Translated title of the contribution: Influence of the phase transformation behaviour on the microstructure and mechanical properties of a 4.5 wt.-% Mn Q&P steelKaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, p. 70-84 15 p.

Research output: Contribution to specialist publicationArticle

Elektronenstrahl-Schweißungen eines martensitischen Chromstahls mit lokalem Legieren

Rabl, A., Pixner, F., Duarte, B., Beal, C. & Enzinger, N., Mar 2019, In : Schweiss- & Prüftechnik. 72, 3/4, p. 54-60

Research output: Contribution to journalArticle

Evaluation of joint formation and mechanical performance of the AA7075-T6/CFRP spot joints produced by frictional heat

André, N. M., dos Santos, J. F. & Amancio-Filho, S. T., 1 Mar 2019, In : Materials. 16, 6, 891.

Research output: Contribution to journalArticle

Open Access

Fatigue crack growth in full-scale railway axles – Influence of secondary stresses and load sequence effects

Rieger, M., Moser, C., Brunnhofer, P., Simunek, D., Weber, F. J., Deisl, A., Gänser, H. P., Pippan, R. & Enzinger, N., 1 Jan 2019, In : International Journal of Fatigue. 11 p., 105360.

Research output: Contribution to journalArticle

Friction stir welding of API X70 steel incorporating Ti-dioxide

Pouriamanesh, R., Dehghani, K. & Vallant, R., 2 Jan 2019, In : Canadian Metallurgical Quarterly. 58, 1, p. 69-81 13 p.

Research output: Contribution to journalArticle

Gas Metal Arc Root Welding of Pearlitic Rails Using Magnetic Arc Deflection

Weingrill, L. A., Schwald, M., Faustmann, C., Frühstück, D. & Enzinger, N., Jan 2019, In : MATEC Web of Conferences. 269, 8 p., 02001.

Research output: Contribution to journalArticle

Open Access

Improving the integrity and the microstructural features of electron beam welds of a creep-resistant martensitic steel by local (de-)alloying

Rabl, A., Pixner, F., Duarte, B., Blatesic, D., Beal, C. & Enzinger, N., 8 Mar 2019, In : Welding in the World. 63, 2, p. 575-582 8 p.

Research output: Contribution to journalArticle

Open Access

Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties

Skalon, M., Görtler, M., Meier, B., Arneitz, S., Urban, N., Mitsche, S., Huber, C., Franke, J. & Sommitsch, C., 29 Dec 2019, In : Materials. 13, 1, 14 p., 139.

Research output: Contribution to journalArticle

Open Access

Influence of the focus wobbling technique on the integrity and the properties of electron beam welded MarBN steel

Rabl, A., Pixner, F., Blatesic, D., Béal, C. & Enzinger, N., 6 Jan 2019, In : Welding in the World. 63, 3, p. 715-724

Research output: Contribution to journalArticle

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

Kaar, S., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., Mar 2019, In : Metals. 9, 3, 353.

Research output: Contribution to journalArticle

Open Access

In Situ Formation of TiB2 in Fe-B System with Titanium Addition and Its Influence on Phase Composition, Sintering Process and Mechanical Properties

Skalon, M., Hebda, M., Schrode, B., Resel, R., Kazior, J. & Sommitsch, C., 13 Dec 2019, In : Materials. 12, 12 p., 4188.

Research output: Contribution to journalArticle

Open Access
File