Hartmuth Schröttner

Amtsdirektor Ing.

19952019
If you made any changes in Pure these will be visible here soon.

Research Output 2001 2019

Filter
Poster
2019

Correlative anaysis of dust particels by SEM, EDXS and Raman

Nachtnebel, M., Steitz, A., Munoz-Czerny, U., Mantler, J., Grüll, G. & Schröttner, H., 16 Sep 2019, p. IT6-4.

Research output: Contribution to conferencePosterResearch

Immunogold labeling of allergens on fine dust filters for SEM investigation.

Rattenberger, J., Nachtnebel, M., Führer, B., Kirchnawy, C., Kaufmann, L., Hartl, C., Schröttner, H. & Ettenberger-Bornberg, G., 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Microbiologically influenced corrosion (MIC) of steel - A study using correlative SEM, EDX and Raman microscopy

Planko, T., Fitzek, H. M., Eichinger, S., Koraimann, G. & Schröttner, H., 2019.

Research output: Contribution to conferencePosterResearchpeer-review

2018

Correlative Scanning Electron Microscopy and Raman Microscopy-Synergies and best Practices

Fitzek, H. M., Zankel, A., Nachtnebel, M., Schmidt, R., Mayrhofer, C. & Schröttner, H., 10 Sep 2018, p. 108.

Research output: Contribution to conferencePosterResearch

Effect of trace elements on microstructure and material properties of an aluminium alloy

Pabel, T., Petkov, T., Schröttner, H., Albu, M., Rossmann-Perner, A., Peter, S. & Li, J., 2018.

Research output: Contribution to conferencePosterResearch

Identification of disturbances in SOFC operation and prediction of cell degradation

Subotić, V., Juricic, D., Stöckl, B., Preininger, M., Boskoski, P., Dolenc, B., Nusev, G., Menzler, N. H., Schröttner, H. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Large planar SOFC-MEA operation with ammonia: Experimental analysis and performance evaluation

Stöckl, B., Subotić, V., Preininger, M., Schwaiger, M., Klopcic, N., Schröttner, H. & Hochenauer, C., 4 Jul 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2016

Carbon removal from the fuel electrode of ASC-SOFC and regeneration of the cell performance

Subotić, V., Schluckner, C., Stöckl, B., Schröttner, H. & Hochenauer, C., Jul 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Effect of trace elements on the material properties of an aluminium casting alloy

Schröttner, H., Albu, M., Rossmann, A., Mertschnigg, S., Pabel, T. & Petkov, T., Sep 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Optimizing the Environmental Scanning Electron Microscope for In Situ Applications

Rattenberger, J., Fitzek, H. M., Schröttner, H., Wagner, J. & Hofer, F., Sep 2016.

Research output: Contribution to conferencePosterResearch

File

Pushing the Limits of Environmental Scanning Electron Microscopy

Rattenberger, J., Fitzek, H. M., Schröttner, H., Wagner, J. & Hofer, F., 2016.

Research output: Contribution to conferencePosterResearch

File
2015

An Experimental Investigation Of Carbon Formation On SOFC-Anodes

Subotic, V., Schluckner, C., Schröttner, H. & Hochenauer, C., 2015.

Research output: Contribution to conferencePosterResearch

Crystallization kinetics of inhalable size amorphous salbutamol as a function of relative humidity and temperature

Zellnitz, S., Narygina, O., Resch, C., Schröttner, H. & Paudel, A., 2015.

Research output: Contribution to conferencePosterResearch

2014

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014.

Research output: Contribution to conferencePosterResearch

Investigation of surface modified glass beads as potential carriers in dry powder inhalers

Zellnitz, S., Kappl, M., Schröttner, H. & Urbanetz, N. A., 2014.

Research output: Contribution to conferencePosterResearch

Multi-Scale-Analysis of Modern Aluminium-Alloys

Schröttner, H., Panzirsch, B., Albu, M., Mitsche, S., Gspan, C., Rattenberger, J., Wagner, J. & Hofer, F., 2014.

Research output: Contribution to conferencePosterResearch

Sputtering thin films for high resolution scanning electron microscopy

Rattenberger, J., Melischnig, A., Schröttner, H., Letofsky-Papst, I., Mertschnigg, S. & Hofer, F., 2014.

Research output: Contribution to conferencePosterResearch

Surface coverage of surface modified glass beads as model carriers in dry powder inhalers influences the FPF

Zellnitz, S., Schröttner, H. & Urbanetz, N. A., 2014.

Research output: Contribution to conferencePosterResearch

2013

Characterisation of single stone impact defects of anticorrosive coated automotive steel plates

Schröttner, H., Schönberger, A., Rattenberger, J., Wagner, J. & Mertschnigg, S., 2013.

Research output: Contribution to conferencePosterResearch

Characterization of physically modified glass beads as potential carrier particles in dry powder inhalates

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H., Kappl, M. & Urbanetz, N. A., 2013.

Research output: Contribution to conferencePosterResearch

Lichtbogenspritzen von Metallschichten für den Verschleiß- und Korrosionsschutz

Jesse, M., Schröttner, H. & Vallant, R., 2013.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface modified model carrier particles for the use in dry powder inhalates

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H., Kappl, M. & Urbanetz, N. A., 2013.

Research output: Contribution to conferencePosterResearch

Understanding the mixing behavior of mechanically modified glass beads as model carriers in DPIs and salbutamol sulphate

Zellnitz, S., Schröttner, H., Kappl, M. & Urbanetz, N. A., 2013.

Research output: Contribution to conferencePosterResearch

X-ray microanalysis in the environmental or variable pressure scanning electron microscope

Rattenberger, J., Schröttner, H., Wagner, J. & Hofer, F., 2013.

Research output: Contribution to conferencePosterResearch

2012

CHEMICAL SURFACE MODIFICATION OF GLASS BEADS AS MODEL CARRIERS FOR DRY POWDER INHALATES

Zellnitz, S., Schröttner, H. & Urbanetz, N. A., 2012.

Research output: Contribution to conferencePosterResearch

Coordinate measurement with nano-metric resolution from multiple SEM images

Danzl, R., Schröttner, H., Scherer, S. & Helmli, F., 2012.

Research output: Contribution to conferencePosterResearch

Mechanical modification of glass beads used as model carrier particles in dry powder inhalers

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H. & Urbanetz, N. A., 2012.

Research output: Contribution to conferencePosterResearch

Modifying the fine particle fraction of dry powder inhalers by carrier surface modification

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H. & Urbanetz, N. A., 2012.

Research output: Contribution to conferencePosterResearch

Serial block face scanning electron microscopy for three dimensional analysis in materials science

Zankel, A., Reingruber, H., Schröttner, H. & Pölt, P., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface optimized model carrier systems for pulmonary drug delivery

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H. & Urbanetz, N. A., 2012.

Research output: Contribution to conferencePosterResearch

The influence of droplet size on the crystallization behavior of aqueous mannitol solutions during spray drying

Littringer, E. M., Mescher, A., Paus, R., Luger, T., Schröttner, H., Walzel, P. & Urbanetz, N. A., 2012.

Research output: Contribution to conferencePosterResearch

2011

3D reconstruction of organic and inorganic materials using in situ ultramicrotomy

Reingruber, H., Zankel, A., Schröttner, H. & Pölt, P., 2011.

Research output: Contribution to conferencePosterResearch

Enhancing the performance of dry powder inhalers by tailoring interparticle forces via surface modification of carrier and active

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H. & Urbanetz, N. A., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Improving the performance of dry powder inhalers by tailoring interparticle interactions

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H. & Urbanetz, N. A., 2011.

Research output: Contribution to conferencePosterResearch

Studien zur Ausbildung der Partikelmorphologie im Sprühtrocknungsprozess zur Steuerung der Leistungsmerkmale von Pulverinhalaten

Littringer, E. M., Maas, S., Schröttner, H. & Urbanetz, N. A., 2011.

Research output: Contribution to conferencePosterResearch

The importance of interparticle interactions for the performance of dry powder inhalers

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H. & Urbanetz, N. A., 2011.

Research output: Contribution to conferencePosterResearch

The importance of interparticle interactions for the performance of dry powder inhalers

Zellnitz, S., Redlinger-Pohn, J. D., Schröttner, H. & Urbanetz, N. A., 2011.

Research output: Contribution to conferencePosterResearch

The influence of carrier morphology on the fine particle fraction of dry powder inhaler formulations

Littringer, E. M., Mescher, A., Schröttner, H., Walzel, P. & Urbanetz, N. A., 2011.

Research output: Contribution to conferencePosterResearch

2010

Determining the total scattering cross section of imaging gases in a LVSEM

Rattenberger, J., Wagner, J. & Schröttner, H., 2010.

Research output: Contribution to conferencePosterResearch

Flüssigphasen-Pyrolyse von Fichtenholz

Schwaiger, N., Mertlitz, V., Schröttner, H., Pucher, P., Ahn, E. & Siebenhofer, M., 2010.

Research output: Contribution to conferencePosterResearch

Influence of carrier particle morphology on the performance of dry powder inhalers

Littringer, E. M., Schröttner, H., Mescher, A., Maier, M., Walzel, P. & Urbanetz, N. A., 2010.

Research output: Contribution to conferencePosterResearch

SPRAY DRIED MANNITOL CARRIER PARTICLES WITH OPTIMIZED SURFACE PROPERTIES

Littringer, E. M., Maas, S., Mescher, A., Schröttner, H., Walzel, P. & Urbanetz, N. A., 2010.

Research output: Contribution to conferencePosterResearch

Spray drying as a novel method for producing nanoparticles intended for the application in DPI`s

Schnepfleitner, S., Schröttner, H. & Urbanetz, N. A., 2010.

Research output: Contribution to conferencePosterResearch

Surface modification of mannitol inhaler carrier particles via spray drying

Littringer, E. M., Mescher, A., Schröttner, H., Walzel, P. & Urbanetz, N. A., 2010.

Research output: Contribution to conferencePosterResearch

The benefit of design of experiments (DOE) for studying the influence of spray drying conditions on particle morphology

Littringer, E. M., Schröttner, H., Mescher, A., Walzel, P. & Urbanetz, N. A., 2010.

Research output: Contribution to conferencePosterResearch

2009

Comparative AFM and SEM investigations on kraft pulp fiber surfaces

Schmied, F., Teichert, C., Kappel, L., Hirn, U., Schennach, R. & Schröttner, H., 2009.

Research output: Contribution to conferencePosterResearch