Hartmuth Schröttner

Amtsdirektor Ing.

19952019
If you made any changes in Pure these will be visible here soon.

Research Output 2001 2019

Filter
Article
2019

Carbohydrates@MOFs

Astria, E., Thonhofer, M., Ricco, R., Liang, W., Angela, C., Tarzia, A., Alt, K., Hagemeyer, C., Rattenberger, J., Schröttner, H., Wrodnigg, T. M., Amenitsch, H., Huang, D., Doonan, C. & Falcaro, P., 1 Jun 2019, In : Materials Horizons. 6, 5, p. 969-977 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Degradation of ZIF-8 in phosphate buffered saline media

Velásquez-Hernández, M. D. J., Ricco, R., Carraro, F., Limpoco, F. T., Linares-Moreau, M., Leitner, E., Wiltsche, H., Rattenberger, J., Schröttner, H., Frühwirt, P., Stadler, E. M., Gescheidt, G., Amenitsch, H., Doonan, C. J. & Falcaro, P., 1 Jan 2019, In : CrystEngComm. 21, 31, p. 4538-4544 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
phosphates
Phosphates
degradation
Degradation
biotechnology

Experimental investigation of thermochemical regeneration using oxy-fuel exhaust gases

Gaber, C., Demuth, M., Prieler, R., Schluckner, C., Schroettner, H., Fitzek, H. & Hochenauer, C., 15 Feb 2019, In : Applied Energy. 236, p. 1115-1124 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Reforming reactions
Exhaust gases
regeneration
methane
carbon
Open Access
Capacitors
Carbon
Iodides
Electrodes
Electrolytes

Mineralogical and microstructural response of hydrated cement blends to leaching

Baldermann, C., Baldermann, A., Furat, O., Krüger, M., Nachtnebel, M., Schroettner, H., Juhart, J., Schmidt, V. & Tritthart, J., 30 Dec 2019, In : Construction and Building Materials. 229, 116902.

Research output: Contribution to journalArticleResearchpeer-review

Leaching
Cements
Calcium Carbonate
Ointments
hydrotalcite

Modelling convective heat transfer to non-spherical particles

Gerhardter, H., Prieler, R. J., Schluckner, C., Knoll, M., Hochenauer, C., Mühlböck, M., Tomazic, P. & Schröttner, H., 1 Feb 2019, In : Powder Technology. 343, p. 245-254 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Tribo-Charging Behaviour of Inhalable Mannitol Blendswith Salbutamol Sulphate

Zellnitz, S., Pinto, J., Brunsteiner, M., Schröttner, H., Khinast, J. & Paudel, A., 2019, In : Pharmaceutical research. 36, 6, p. 80 11 p., 36:80.

Research output: Contribution to journalArticleResearchpeer-review

2018

Adsorptive on-board desulfurization over multiple cycles for fuel-cell-based auxiliary power units operated by different types of fuels

Neubauer, R., Weinländer, C., Kienzl, N., Bitschnau, B., Schröttner, H. & Hochenauer, C., 2018, In : Journal of power sources. 385, 1, p. 45-54

Research output: Contribution to journalArticleResearchpeer-review

Investigation of NH3 Influence on Adsorptive H2S Removal from Biogas for Solid Oxide Fuel Cell Application

Weinländer, C., Neubauer, R., Hauth, M., Schröttner, H. & Hochenauer, C., 2018, In : Chemie - Ingenieur - Technik. 90, 7, p. 937-946

Research output: Contribution to journalArticleResearchpeer-review

Mechanical strength of microspheres produced by drying of acoustically levitated suspension droplets

Kreimer, M., Aigner, I., Sacher, S., Krumme, M., Mannschott, T., van der Wel, P., Kaptein, A., Schröttner, H., Brenn, G. & Khinast, J., 2018, In : Powder Technology. 325, p. 247-260

Research output: Contribution to journalArticleResearchpeer-review

Properties of nitrocarburised and oxidised steel surfaces and the correlation with their tribological behaviour under unlubricated sliding conditions

Velkavrh, I., Ausserer, F., Klien, S., Voyer, J., Lingenhöle, K., Kafexhiu, F., Mandrino, D., Podgornik, B., Rattenberger, J., Schröttner, H. & Hofer, F., 2018, In : Wear. 410-411, p. 127-141

Research output: Contribution to journalArticleResearchpeer-review

Towards a practical tool for online monitoring of solid oxide fuel cell operation: An experimental study and application of advanced data analysis approaches

Subotić, V., Stoeckl, B., Lawlor, V., Strasser, J., Schroettner, H. & Hochenauer, C., 15 Jul 2018, In : Applied Energy. 222, p. 748-761 14 p.

Research output: Contribution to journalArticleResearchpeer-review

fuel cell
Solid oxide fuel cells (SOFC)
experimental study
oxide
Monitoring
2017

Development of Cell-Protecting Methods for Carbon-Removal from Porous Ni-YSZ Anodes and Regeneration of the Cell Performance

Subotić, V., Stöckl, B., Schluckner, C., Pofahl, S., Lawlor, V., Schröttner, H. & Hochenauer, C., 2017, In : ECS Transactions. 78, 1, p. 2441-2449 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Extensive analysis of large planar SOFC: Operation with humidified methane and carbon monoxide to examine carbon deposition based degradation

Stöckl, B., Subotić, V., Reichholf, D., Schröttner, H. & Hochenauer, C., 4 Oct 2017, In : Electrochimica acta. 256, p. 325-336 11 p.

Research output: Contribution to journalArticleResearchpeer-review

In-operando Detection of Carbon Depositions and Carbon Formation Predictions for Industrial-Sized SOFCs Fueled with Synthetic Diesel Reformate

Subotić, V., Schluckner, C., Stöckl, B., Reichholf, D., Lawlor, V., Pofahl, S., Schröttner, H. & Hochenauer, C., 2017, In : ECS Transactions. 78, 1, p. 2451-2460 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Thermal in Situ and System-Integrated Regeneration Strategy for Adsorptive On-Board Desulfurization Units

Neubauer, R., Kienzl, N., Bitschnau, B., Schröttner, H. & Hochenauer, C., 19 Oct 2017, In : Energy & fuels. 31, 11

Research output: Contribution to journalArticleResearchpeer-review

Desulfurization
Adsorbents
Adsorption
Gases
Solid oxide fuel cells (SOFC)

Analysis of possibilities for carbon removal from porous anode of solid oxide fuel cells after different failure modes

Subotic, V., Schluckner, C., Schröttner, H. & Hochenauer, C., 2016, In : Journal of power sources. 302, p. 378-386

Research output: Contribution to journalArticleResearchpeer-review

In-situ electrochemical characterization methods for industrial-sizedplanar solid oxide fuel cells Part I: Methodology, qualification anddetection of carbon deposition

Subotić, V., Schluckner, C., Strasser, J., Lawlor, V., Mathe, J., Rechberger, J., Schröttner, H. & Hochenauer, C., 2016, In : Electrochimica acta. 207, p. 224-236 10 p.

Research output: Contribution to journalArticleResearchpeer-review

In-situ electrochemical characterization methods for industrial-sized planar solid oxide fuel cells Part I: Methodology, qualification and detection of carbon deposition

Subotić, V., Schluckner, C., Strasser, J., Lawlor, V., Mathe, J., Rechberger, J., Schröttner, H. & Hochenauer, C., 9 May 2016, In : Electrochimica acta. 207, p. 224-236 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Microhardness and Phase Composition of TiOy/Hydroxyapatite Nanocomposites Synthesized under Low-Temperature Annealing Conditions

Rempel, S. V., Bogdanova, E. A., Valeeva, A. A., Schröttner, H., Sabirzyanov, N. A. & Rempel, A. A., 2016, In : Inorganic materials. 52, 5, p. 476-482 6 p.

Research output: Contribution to journalArticleResearch

Strategy for Carbon Gasification from Porous Ni-YSZ Anodes of Industrial-Sized ASC-SOFCs and Effects of Carbon Growth

Subotić, V., Schluckner, C., Stöckl, B., Lawlor, V., Schröttner, H. & Hochenauer, C., 2016, In : Journal of the Electrochemical Society. 163, 14, p. F1515-F1522 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Vacuum-made nanocomposite of low-temperature hydroxyapatite and hard nonstoichiometric titanium monoxide with enhanced mechanical properties

Rempel, S. V., Valeeva, A. A., Bogdanova, E. A., Schröttner, H. & Rempel, A. A., 2016, In : Mendeleev Communications. 26, p. 543-545

Research output: Contribution to journalArticleResearchpeer-review

2015

About Microwave Solvothermal Synthesis of Solid Solutions LiFexMn1-xPO4/C and Their Electrochemical Properties

Handel, P. M., Stangl, C., God, C., Filzwieser, M., Uhlig, F., Schröttner, H. & Koller, S., 2015, In : ECS Transactions. 66, 9, p. 127-137

Research output: Contribution to journalArticleResearch

Anode regeneration following carbon depositions in an industrial-sized anode supported solid oxide fuel cell operating on synthetic diesel reformate

Subotic, V., Schluckner, C., Mathe, J., Rechberger, J., Schröttner, H. & Hochenauer, C., 2015, In : Journal of power sources. 295, p. 55-66

Research output: Contribution to journalArticleResearchpeer-review

Crystallization speed of salbutamol as a function of relative humidity and temperature

Zellnitz, S., Narygina, O., Resch, C., Schröttner, H. & Urbanetz, N. A., 2015, In : International Journal of Pharmaceutics. 489, p. 170-176

Research output: Contribution to journalArticleResearchpeer-review

Effect of Stoichiometry on the Size of Titanium Monoxide Nanoparticles Produced by Fragmentation

Valeeva, A. A., Petrovykh, K. A., Schröttner, H. & Rempel, A. A., 2015, In : Inorganic materials. 51, 11, p. 1132-1137

Research output: Contribution to journalArticleResearchpeer-review

Experimental evaluation of environmental scanning electron microscopes at high chamber pressure

Fitzek, H. M., Schröttner, H., Wagner, J., Hofer, F. & Rattenberger, J., 2015, In : Journal of microscopy. 260, p. 133-139

Research output: Contribution to journalArticleResearchpeer-review

Influence of surface characteristics of modified glass beads as model carriers in dry powder inhalers (DPIs) on the aerosolization performance

Zellnitz, S., Schröttner, H. & Urbanetz, N. A., 2015, In : Drug development and industrial pharmacy. 41, 10, p. 1710-1717

Research output: Contribution to journalArticleResearchpeer-review

2014

Imaging of the formerly bonded area of individual fibre to fibre joints with SEM and AFM

Fischer, W. J., Zankel, A., Ganser, C., Schmied, F., Schröttner, H., Hirn, U., Teichert, C., Bauer, W. & Schennach, R., 2014, In : Cellulose. 21, 1, p. 251-260

Research output: Contribution to journalArticleResearchpeer-review

NbO Disintegration by Surfactant-Assisted High-Energy Ball Milling

Valeeva, A. A., Schröttner, H. & Rempel, A. A., 2014, In : Inorganic materials. 50, p. 398-403

Research output: Contribution to journalArticleResearchpeer-review

Surface modified glass beads as model carriers in dry powder inhalers—Influence of drug load on the fine particle fraction

Zellnitz, S., Schröttner, H. & Urbanetz, N. A., 2014, In : Powder Technology. 268, p. 377-386

Research output: Contribution to journalArticleResearchpeer-review

2013

Preparation and characterization of physically modified glass beads used as model carriers in dry powder inhalers

Zellnitz, S., Redlinger-Pohn, J. D., Kappl, M., Urbanetz, N. A. & Schröttner, H., 2013, In : International Journal of Pharmaceutics. 447, p. 132-138

Research output: Contribution to journalArticleResearchpeer-review

The morphology and various densities of spray dried mannitol

Littringer, E. M., Noisternig, M. F., Mescher, A., Schröttner, H., Walzel, P., Urbanetz, N. A. & Griesser, U. J., 2013, In : Powder Technology. 246, p. 193-200

Research output: Contribution to journalArticleResearchpeer-review

2012

BiomassPyrolysisRefinery: Ein zweistufiges Konzept zur Herstellung von flüssigen Energieträgern aus Lignocellulose

Schwaiger, N., Feiner, R., Pucher, H., Schröttner, H. & Siebenhofer, M., 2012, In : Chemie - Ingenieur - Technik. 84, 8, p. 1302-1303

Research output: Contribution to journalArticleResearchpeer-review

Formation of liquid and solid products from liquidphasepyrolysis

Schwaiger, N., Witek, V., Feiner, R., Pucher, H., Pieber, A., Chernev, B. S., Wilhelm, P., Schröttner, H. & Siebenhofer, M., 2012, In : Bioresource Technology. 124, p. 90-94

Research output: Contribution to journalArticleResearchpeer-review

Investigation of friction stir welding of stainless steel using a stop-action-technique

Pfeiffer, C., Weinberger, T., Schröttner, H., Mitsche, S. & Enzinger, N., 2012, In : Advanced Materials Research. 409, p. 293-298

Research output: Contribution to journalArticleResearchpeer-review

Loss of Ductility Caused by AlN Precipitation in Hadfield Steel

Radis, R., Schlacher, C., Kozeschnik, E., Mayr, P., Enzinger, N., Schröttner, H. & Sommitsch, C., 2012, In : Metallurgical and materials transactions / A. 43, 4, p. 1132-1139

Research output: Contribution to journalArticleResearchpeer-review

Materials and Corrosion

Schönberger, A., Virtanen, S., Giese, V., Spießberger, C. & Schröttner, H., 2012, In : Materials and corrosion. 63, 3, p. Deckblatt-n/a

Research output: Contribution to journalArticleResearchpeer-review

Non-destructive detection of corrosion applied to steel and galvanized steel coated with organic paints by the pulsed phase thermography

Schönberger, A., Virtanen, S., Giese, V., Schröttner, H. & Spießberger, C., 2012, In : Materials and corrosion. 63, 3, p. 195-199

Research output: Contribution to journalArticleResearchpeer-review

Non-destructive evaluation of stone-impact damages using Pulsed Phase Thermography

Schönberger, A., Virtanen, S., Giese, V., Spießberger, H., Schröttner, H., Rattenberger, J. & Wagner, J., 2012, In : Corrosion science. 56, p. 168-175

Research output: Contribution to journalArticleResearchpeer-review

Patterned immobilisation of silicon dioxide nanoparticles on the surface of a photosensitive polymer

Muhr, N., Grinschgl, M., Griesser, T., Kern, W. & Schröttner, H., 2012, In : Thin solid films. 520, p. 1789-1793

Research output: Contribution to journalArticleResearchpeer-review

Spray drying of mannitol as a drug carrier – The impact of process parameters on the product properties

Littringer, E. M., Mescher, A., Eckhard, S., Schröttner, H., Langes, C., Fries, M., Grieser, U., Walzel, P. & Urbanetz, N. A., 2012, In : Drying technology. 30, 1, p. 114-124

Research output: Contribution to journalArticleResearchpeer-review