Institute of Fundamentals and Theory in Electrical Engineering (4370)

  • 8010

    Inffeldgasse 18 Graz

    Austria

Research Output 1985 2019

Filter
Poster
2019

Numerical Investigations of the Field Regions for Wire Based Antenna Systems

Baumgartner, P., Renhart, W., Biro, O. & Bauernfeind, T., 17 Jul 2019.

Research output: Contribution to conferencePosterResearch

PEEC based Design Optimization of NFC Antennas Considering the Full System Quality Factor

Baumgartner, P., Renhart, W., Biro, O., Bauernfeind, T., Torchio, R., Riener, C. & Koger, C., 20 Jun 2019.

Research output: Contribution to conferencePosterResearch

Size Reduction for Yagi-Uda Antennas by means of Reactively Loaded Reflectors and Directors

Bauernfeind, T., Baumgartner, P., Biro, O., Magele, C. & Renhart, W., 16 Jul 2019.

Research output: Contribution to conferencePosterResearchpeer-review

2018

Boundaries of the field regions: A simulation based approach

Baumgartner, P., Renhart, W., Bauernfeind, T., Biro, O. & Kreindl, D., 18 Sep 2018.

Research output: Contribution to conferencePosterResearch

Calculation of motion induced eddy currents, utilizing the T,φ-φ formulation

Wallinger, G., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Identification of aortic disease by measuring conductivity changes on the human thorax

Reinbacher-Köstinger, A., Biro, O. & Magele, C., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Modified Differential Evolution Strategy based on Adaptive Parameter Space Limitation

Bauernfeind, T., Baumgartner, P., Biro, O., Magele, C., Renhart, W. & Torchio, R., 30 Oct 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Non-conforming finite element method to simulate eddy currents due to motion using the T,Φ-Φ formulation

Wallinger, G., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Non-Uniformly Spaced Linear Antenna Array Design Using PEEC and Coyote Optimization Algorithm

Alotto, P., dos S. Coelho, L., Mariani, V. C., Pierezan, J., Bauernfeind, T. & Baumgartner, P., 18 Sep 2018.

Research output: Contribution to conferencePosterResearch

Numerical simulation of conductivity changes in the human thorax caused by aortic dissection

Reinbacher-Köstinger, A., Badeli, V., Biro, O. & Magele, C., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2017

FEM Computation in the Time Domain for Calibration of Electromagnetic Near-Field Scanning Technique

Bauer, S. M., Biro, O. & Koczka, G., 21 Jun 2017.

Research output: Contribution to conferencePosterResearch

Multi-Objective Synthesis of NFC-Transponder Systems based on PEEC Method

Bauernfeind, T., Baumgartner, P., Biro, O., Hackl, A., Magele, C., Renhart, W. & Torchio, R., 19 Jun 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Transient Behavior of Large Transformer Windings Taking Capacitances and Eddy Currents Into Account

Biro, O., Preis, K., Renhart, W. & Rabel, A., 2017.

Research output: Contribution to conferencePosterResearchpeer-review

2016

An approach to calculate the source field of complex conductor structures

Wallinger, G. & Biro, O., 30 Jun 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Application of time-domain method for electromagnetic analysis in the frequency-domain

Bauer, S. M. & Biro, O., 21 Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Deficiencies of Analytical Models for Simple Antenna Structures

Baumgartner, P., Bauernfeind, T., Renhart, W. & Biro, O., 19 Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

FEM- based Computation of Circuit Parameters for Testing Fast Transients for EMC Problems

Bauer, S. M., Biro, O. & Renhart, W., 15 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Interactive Toolbox for the Visualization of Typical Antenna Attributes

Baumgartner, P., Bauernfeind, T., Preis, K. & Biro, O., 16 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Periodic boundary conditions for 3D FEM using a non-conforming mesh

Wallinger, G. & Biro, O., Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

UHF RFID Antenna Impedance Characterization: Numerical Simulation of Interconnection Effects on the Antenna Impedance

Bauernfeind, T., Renhart, W., Alotto, P. & Biro, O., 16 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

2015

Comparison of two methods for the finite element analysis of nonlinear 3D periodic eddy-current problems

Plasser, R., Takahashi, Y., Koczka, G. & Biro, O., 2015.

Research output: Contribution to conferencePosterResearch

Firefly Algorithm for Finding Optimal Shapes of Electromagnetic Devices

Alb, M., Alotto, P., Magele, C., Preis, K., Renhart, W. & Trapp, B., 2015.

Research output: Contribution to conferencePosterResearch

Open Access
File

Influence of Different Cutting Techniques on the Magnetic Characteristics of Electrical Steels Determined by a Remagraph

Bali, M., 10 May 2015, p. 1190. 1196 p.

Research output: Contribution to conferencePosterResearchpeer-review

Real-time pose detection for magnetic-assisted medical applications by means of a hybrid deterministic/stochastic optimization method

Alotto, P., Alb, M., Guarnieri, M., Magele, C. & Renhart, W., 2015.

Research output: Contribution to conferencePosterResearch

Open Access
File
2014

A coupling method for nonconforming mehses in the 3D FEM analysis of static fields

Wallinger, G., 2014.

Research output: Contribution to conferencePosterResearch

Analysis of Temperature Distribution in the Stator of Large Synchronous Machines Considering Heat Conduction and Heat Convection

Schrittwieser, M., 2014.

Research output: Contribution to conferencePosterResearch

A Transient Current Vector Potential to Consider the Rotor Excitation of Synchronous Machines Under Short Circuit Condition

Wallinger, G., Biro, O. & Rieg, S., 2014.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Comparison of various methods for the finite element analysis of nonlinear, periodic eddy-current problems

Plasser, R., Takahashi, Y. & Biro, O., 2014.

Research output: Contribution to conferencePosterResearch

Consideration of Rotor Eccentricity Effects in a Multi Body Dynamics Simulation using a Finite Element Based Circuit Model Approach

Mohr, M., Biro, O. & Diwoky, F., 2014.

Research output: Contribution to conferencePosterResearch

Consideration of Rotor Eccentricity Effects in Finite Element Based Circuit Models

Mohr, M., Biro, O. & Diwoky, F., 2014.

Research output: Contribution to conferencePosterResearch

Effects of Inverter Supply on the Iron Loss Characteristics of Doubly Fed Induction Machines

Handgruber, P., Schernthanner, S., Stermecki, A., Biro, O. & Ofner, G., 2014.

Research output: Contribution to conferencePosterResearch

Finite Element Simulation of Impedance Measurement Effects of NFC Antennas

Bauernfeind, T., Preis, K., Renhart, W., Biro, O. & Gebhart, M., 2014.

Research output: Contribution to conferencePosterResearch

Implementation of a New Simulation Strategy for a Cooling Study of Large Hydro Generators

Klomberg, S., 2014.

Research output: Contribution to conferencePosterResearch

Numerical Study of the Cooling Air Flow in a Hydro Generator with various Ventilation Systems

Klomberg, S., 2014.

Research output: Contribution to conferencePosterResearch

Validation of a Heat Transfer Model for End Winding Bars of Large Hydro Generators

Klomberg, S., 2014.

Research output: Contribution to conferencePosterResearch

Validation of Finite Element Solutions of Nonlinear, Periodic Eddy Current Problems

Plasser, R. & Biro, O., 2014.

Research output: Contribution to conferencePosterResearch

2013

A Finite Element Based Circuit Model Approach for Skewed Electrical Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013.

Research output: Contribution to conferencePosterResearch

Finite Element Analysis of Three-Phase Three-Limb Power Transformers under DC Bias

Biro, O., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2013.

Research output: Contribution to conferencePosterResearch

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator Ducts with Measurements

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013.

Research output: Contribution to conferencePosterResearch

2012

An Improved Physical Phase Variable Model for Permanent Magnet Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

A Physical Phase Variable Model for Wound Rotor Induction Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

Computation of rotating force waves in skewed induction machines using multi-slice models

Weilharter, B., Biro, O., Rainer, S. & Stermecki, A., 2012.

Research output: Contribution to conferencePosterResearch

Finite Element Based Modeling of Wound Rotor Induction Machines (Parameter Identification)

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

Heat Transfer Analysis on End Windings of a Hydro Generator using a Stator-Slot-Sector Model

Klomberg, S., 2012.

Research output: Contribution to conferencePosterResearch

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch