Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2

J. Kotschenreuther, J. Fleischer, L. Delonnoy, V. Schulze, D. Löhe, T. Hochrainer, M. Weber, P. Gumbsch

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abstract

With the miniaturization of cutting processes the relative influence of not similarly scaleable quantities on the process results increases. This has consequences on the applicability of cutting force models known from conventional cutting. By means of similarity mechanics and on the basis of finite element simulations important process parameters are identified. An equation for the prediction of specific cutting forces in micro cutting is developed. Results deduced from the equation with parameters fitted to the simulations are compared to experimental results.

Original languageEnglish
Title of host publicationProceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006
PublisherEuspen
Pages156-159
Number of pages4
Volume2
ISBN (Electronic)0955308208, 9780955308208
Publication statusPublished - 2006
Event6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006 - Baden bei Wien, Vienna, Austria
Duration: 28 May 20061 Jun 2006

Conference

Conference6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006
CountryAustria
CityBaden bei Wien, Vienna
Period28/05/061/06/06

Fingerprint

miniaturization
Mechanics
simulation
predictions

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Materials Science(all)
  • Mechanical Engineering
  • Instrumentation
  • Environmental Engineering

Cite this

Kotschenreuther, J., Fleischer, J., Delonnoy, L., Schulze, V., Löhe, D., Hochrainer, T., ... Gumbsch, P. (2006). Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2. In Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006 (Vol. 2, pp. 156-159). Euspen.

Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2. / Kotschenreuther, J.; Fleischer, J.; Delonnoy, L.; Schulze, V.; Löhe, D.; Hochrainer, T.; Weber, M.; Gumbsch, P.

Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Vol. 2 Euspen, 2006. p. 156-159.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Kotschenreuther, J, Fleischer, J, Delonnoy, L, Schulze, V, Löhe, D, Hochrainer, T, Weber, M & Gumbsch, P 2006, Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2. in Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. vol. 2, Euspen, pp. 156-159, 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006, Baden bei Wien, Vienna, Austria, 28/05/06.
Kotschenreuther J, Fleischer J, Delonnoy L, Schulze V, Löhe D, Hochrainer T et al. Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2. In Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Vol. 2. Euspen. 2006. p. 156-159
Kotschenreuther, J. ; Fleischer, J. ; Delonnoy, L. ; Schulze, V. ; Löhe, D. ; Hochrainer, T. ; Weber, M. ; Gumbsch, P. / Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2. Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Vol. 2 Euspen, 2006. pp. 156-159
@inproceedings{d7dda5da11614ea99c2aad12214e78d4,
title = "Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2",
abstract = "With the miniaturization of cutting processes the relative influence of not similarly scaleable quantities on the process results increases. This has consequences on the applicability of cutting force models known from conventional cutting. By means of similarity mechanics and on the basis of finite element simulations important process parameters are identified. An equation for the prediction of specific cutting forces in micro cutting is developed. Results deduced from the equation with parameters fitted to the simulations are compared to experimental results.",
author = "J. Kotschenreuther and J. Fleischer and L. Delonnoy and V. Schulze and D. L{\"o}he and T. Hochrainer and M. Weber and P. Gumbsch",
year = "2006",
language = "English",
volume = "2",
pages = "156--159",
booktitle = "Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006",
publisher = "Euspen",

}

TY - GEN

T1 - Modeling and experimental analyses of size effects in turning of quenched and tempered AISI O2

AU - Kotschenreuther, J.

AU - Fleischer, J.

AU - Delonnoy, L.

AU - Schulze, V.

AU - Löhe, D.

AU - Hochrainer, T.

AU - Weber, M.

AU - Gumbsch, P.

PY - 2006

Y1 - 2006

N2 - With the miniaturization of cutting processes the relative influence of not similarly scaleable quantities on the process results increases. This has consequences on the applicability of cutting force models known from conventional cutting. By means of similarity mechanics and on the basis of finite element simulations important process parameters are identified. An equation for the prediction of specific cutting forces in micro cutting is developed. Results deduced from the equation with parameters fitted to the simulations are compared to experimental results.

AB - With the miniaturization of cutting processes the relative influence of not similarly scaleable quantities on the process results increases. This has consequences on the applicability of cutting force models known from conventional cutting. By means of similarity mechanics and on the basis of finite element simulations important process parameters are identified. An equation for the prediction of specific cutting forces in micro cutting is developed. Results deduced from the equation with parameters fitted to the simulations are compared to experimental results.

UR - http://www.scopus.com/inward/record.url?scp=84908341365&partnerID=8YFLogxK

M3 - Conference contribution

VL - 2

SP - 156

EP - 159

BT - Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006

PB - Euspen

ER -