1985 …2020
If you made any changes in Pure these will be visible here soon.

Research Output 1985 2019

Filter
Poster
2018

Boundaries of the field regions: A simulation based approach

Baumgartner, P., Renhart, W., Bauernfeind, T., Biro, O. & Kreindl, D., 18 Sep 2018.

Research output: Contribution to conferencePosterResearch

Identification of aortic disease by measuring conductivity changes on the human thorax

Reinbacher-Köstinger, A., Biro, O. & Magele, C., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Modified Differential Evolution Strategy based on Adaptive Parameter Space Limitation

Bauernfeind, T., Baumgartner, P., Biro, O., Magele, C., Renhart, W. & Torchio, R., 30 Oct 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Numerical simulation of conductivity changes in the human thorax caused by aortic dissection

Reinbacher-Köstinger, A., Badeli, V., Biro, O. & Magele, C., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

2017

FEM Computation in the Time Domain for Calibration of Electromagnetic Near-Field Scanning Technique

Bauer, S. M., Biro, O. & Koczka, G., 21 Jun 2017.

Research output: Contribution to conferencePosterResearch

Multi-Objective Synthesis of NFC-Transponder Systems based on PEEC Method

Bauernfeind, T., Baumgartner, P., Biro, O., Hackl, A., Magele, C., Renhart, W. & Torchio, R., 19 Jun 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Transient Behavior of Large Transformer Windings Taking Capacitances and Eddy Currents Into Account

Biro, O., Preis, K., Renhart, W. & Rabel, A., 2017.

Research output: Contribution to conferencePosterResearchpeer-review

2016

An approach to calculate the source field of complex conductor structures

Wallinger, G. & Biro, O., 30 Jun 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Application of time-domain method for electromagnetic analysis in the frequency-domain

Bauer, S. M. & Biro, O., 21 Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Deficiencies of Analytical Models for Simple Antenna Structures

Baumgartner, P., Bauernfeind, T., Renhart, W. & Biro, O., 19 Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

FEM- based Computation of Circuit Parameters for Testing Fast Transients for EMC Problems

Bauer, S. M., Biro, O. & Renhart, W., 15 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Interactive Toolbox for the Visualization of Typical Antenna Attributes

Baumgartner, P., Bauernfeind, T., Preis, K. & Biro, O., 16 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Periodic boundary conditions for 3D FEM using a non-conforming mesh

Wallinger, G. & Biro, O., Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

UHF RFID Antenna Impedance Characterization: Numerical Simulation of Interconnection Effects on the Antenna Impedance

Bauernfeind, T., Renhart, W., Alotto, P. & Biro, O., 16 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

2015

3-D FE Method Analysis of Static Fields for Non-Conforming Meshes With Second-Order Node-Based Elements

Wallinger, G. & Biro, O., 2015.

Research output: Contribution to conferencePosterResearch

Comparison of two methods for the finite element analysis of nonlinear 3D periodic eddy-current problems

Plasser, R., Takahashi, Y., Koczka, G. & Biro, O., 2015.

Research output: Contribution to conferencePosterResearch

2014

A Transient Current Vector Potential to Consider the Rotor Excitation of Synchronous Machines Under Short Circuit Condition

Wallinger, G., Biro, O. & Rieg, S., 2014.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Comparison of various methods for the finite element analysis of nonlinear, periodic eddy-current problems

Plasser, R., Takahashi, Y. & Biro, O., 2014.

Research output: Contribution to conferencePosterResearch

Consideration of Rotor Eccentricity Effects in a Multi Body Dynamics Simulation using a Finite Element Based Circuit Model Approach

Mohr, M., Biro, O. & Diwoky, F., 2014.

Research output: Contribution to conferencePosterResearch

Effects of Inverter Supply on the Iron Loss Characteristics of Doubly Fed Induction Machines

Handgruber, P., Schernthanner, S., Stermecki, A., Biro, O. & Ofner, G., 2014.

Research output: Contribution to conferencePosterResearch

Finite Element Simulation of Impedance Measurement Effects of NFC Antennas

Bauernfeind, T., Preis, K., Renhart, W., Biro, O. & Gebhart, M., 2014.

Research output: Contribution to conferencePosterResearch

Validation of Finite Element Solutions of Nonlinear, Periodic Eddy Current Problems

Plasser, R. & Biro, O., 2014.

Research output: Contribution to conferencePosterResearch

2013

A Finite Element Based Circuit Model Approach for Skewed Electrical Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013.

Research output: Contribution to conferencePosterResearch

Finite Element Analysis of Three-Phase Three-Limb Power Transformers under DC Bias

Biro, O., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2013.

Research output: Contribution to conferencePosterResearch

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator Ducts with Measurements

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013.

Research output: Contribution to conferencePosterResearch

2012

An Improved Physical Phase Variable Model for Permanent Magnet Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

A Physical Phase Variable Model for Wound Rotor Induction Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

Computation of rotating force waves in skewed induction machines using multi-slice models

Weilharter, B., Biro, O., Rainer, S. & Stermecki, A., 2012.

Research output: Contribution to conferencePosterResearch

Finite Element Based Modeling of Wound Rotor Induction Machines (Parameter Identification)

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

Scattering Calculations of Passive UHF-RFID Transponders

Bauernfeind, T., Koczka, G., Preis, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

Three-Dimensional Eddy Current Loss Modeling in Steel Laminations of Skewed Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2012.

Research output: Contribution to conferencePosterResearch

2011

3-D Finite Element Analysis of Additional Eddy Current Losses in Induction Motors

Stermecki, A., Biro, O., Bakhsh, I., Rainer, S., Ofner, G. & Ingruber, R., 2011.

Research output: Contribution to conferencePosterResearch

3-D Time-harmonic Eddy Current Problems Solved by the Geometric Multigrid Preconditioned Conjugate Gradient Method

Chen, C. & Biro, O., 2011.

Research output: Contribution to conferencePosterResearch

Application of the PSO algorithm to the Multi-objective Optimization of insulation elements based on dynamic population size

Kitak, P., Ticar, I., Glotic, A., Pihler, J., Biro, O. & Preis, K., 2011.

Research output: Contribution to conferencePosterResearch

CHARACTERIZING THE HEAT TRANSFER ON THE END-WINDINGS IN AN ELECTRICAL MACHINE DEPENDING ON GEOMETRICAL PROPERTIES OF THE END-REGION

Hettegger, M., Streibl, B., Biro, O. & Neudorfer, H., 2011.

Research output: Contribution to conferencePosterResearch

Computing Eddy Currents in Permanent Magnet Synchronous Machines by a 3D Finite Element Model without Motion

Mohr, M., Biro, O. & Stermecki, A., 2011.

Research output: Contribution to conferencePosterResearch

Frequency Domain Evaluation of Transient Finite Element Simulations of Induction Machines

Rainer, S., Biro, O., Stermecki, A. & Weilharter, B., 2011.

Research output: Contribution to conferencePosterResearch

Geometric multigrid with plane smoothing for thin elements in 3-D magnetostatic field calculation

Chen, C. & Biro, O., 2011.

Research output: Contribution to conferencePosterResearch

Influence of the Non-Linear UHF-RFID IC Impedance on the Backscatter Abilities of a T-Match Tag Antenna Design

Bauernfeind, T., Preis, K., Koczka, G., Maier, S. & Biro, O., 2011.

Research output: Contribution to conferencePosterResearch

Numerical investigation of the 3D vibrational behaviour of skewed induction machines due to rotating force waves

Weilharter, B., Biro, O. & Rainer, S., 2011.

Research output: Contribution to conferencePosterResearch

Steady-State Analysis of Power Transformers under DC Bias by the Finite Element Method with the Fixed Point Technique

Biro, O., Chen, Y., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2011.

Research output: Contribution to conferencePosterResearch

2010

A domain decomposition based method accelerated by GPU for solving wave-propagation problems

Koczka, G., Kiss, I., Bauernfeind, T., Preis, K. & Biro, O., 2010.

Research output: Contribution to conferencePosterResearch

A Model Order Reduction Method for Efficient Band Structure Calculations of Photonic Crystals

Scheiber, C., Schultschik, A., Biro, O. & Dyczij-Edlinger, R., 2010.

Research output: Contribution to conferencePosterResearch

A single-point model-order reduction scheme for band structure calculations of photonic crystals

Scheiber, C., Biro, O. & Dyczij-Edlinger, R., 2010.

Research output: Contribution to conferencePosterResearch

Characterizing the heat transfer on the end-windings of an electrical machine for transient simulations

Hettegger, M., Streibl, B., Biro, O. & Neudorfer, H., 2010.

Research output: Contribution to conferencePosterResearch

Computation of rotating force waves in induction machines using multi-slice models

Weilharter, B., Biro, O. & Rainer, S., 2010.

Research output: Contribution to conferencePosterResearch