Oszkar Biro

Univ.-Prof. Dipl.-Ing. Dr.techn.

1985 …2020
If you made any changes in Pure these will be visible here soon.

Research Output 1985 2019

2011

3-D Finite Element Analysis of Additional Eddy Current Losses in Induction Motors

Stermecki, A., Biro, O., Bakhsh, I., Rainer, S., Ofner, G. & Ingruber, R., 2011, Proceedings of the 18th International Conference on the Computation of Electromagnetic Fields. ., p. CMP-485-CMP-485

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3-D Time-harmonic Eddy Current Problems Solved by the Geometric Multigrid Preconditioned Conjugate Gradient Method

Chen, C. & Biro, O., 2011.

Research output: Contribution to conferencePosterResearch

3-D Time-harmonic Eddy Current Problems Solved by the Geometric Multigrid Preconditioned Conjugate Gradient Method

Chen, C. & Biro, O., 2011, The 8th International Conference on Computation in Electromagnetics. ., p. 18-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Model Order Reduction Method for Efficient Band Structure Calculations of Photonic Crystals

Scheiber, C., Schultschik, A., Biro, O. & Dyczij-Edlinger, R., 2011, In : IEEE Transactions on Magnetics. 47, 5, p. 1534-1537

Research output: Contribution to journalArticleResearchpeer-review

Application of the PSO algorithm to the Multi-objective Optimization of insulation elements based on dynamic population size

Kitak, P., Ticar, I., Glotic, A., Pihler, J., Biro, O. & Preis, K., 2011, Proceedings of the 18th Conference on the Computation of Electromagnetic Fields. ., p. 782-782

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of the PSO algorithm to the Multi-objective Optimization of insulation elements based on dynamic population size

Kitak, P., Ticar, I., Glotic, A., Pihler, J., Biro, O. & Preis, K., 2011.

Research output: Contribution to conferencePosterResearch

CHARACTERIZING THE HEAT TRANSFER ON THE END-WINDINGS IN AN ELECTRICAL MACHINE DEPENDING ON GEOMETRICAL PROPERTIES OF THE END-REGION

Hettegger, M., Biro, O., Streibl, B. & Neudorfer, H., 2011, International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CHARACTERIZING THE HEAT TRANSFER ON THE END-WINDINGS IN AN ELECTRICAL MACHINE DEPENDING ON GEOMETRICAL PROPERTIES OF THE END-REGION

Hettegger, M., Streibl, B., Biro, O. & Neudorfer, H., 2011.

Research output: Contribution to conferencePosterResearch

Computation of Rotating Force Waves in Skewed Induction Machines Using Multi-Slice Models

Weilharter, B., Biro, O., Rainer, S. & Stermecki, A., 2011, In : IEEE Transactions on Magnetics. 47, 5, p. 1046-1049

Research output: Contribution to journalArticleResearchpeer-review

Computation of the noise radiation of an induction machine using 3D FEM/BEM

Weilharter, B., Biro, O., Lang, H. & Rainer, S., 2011, In : COMPEL - The international journal for computation and mathematics in electrical and electronic engineering. 30, 6, p. 1737-1750

Research output: Contribution to journalArticleResearchpeer-review

Computing Eddy Currents in Permanent Magnet Synchronous Machines by a 3D Finite Element Model without Motion

Mohr, M., Biro, O. & Stermecki, A., 2011, Conference on the Computation of Electromagnetic Fields. ., p. 427-427

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Computing Eddy Currents in Permanent Magnet Synchronous Machines by a 3D Finite Element Model without Motion

Mohr, M., Biro, O. & Stermecki, A., 2011.

Research output: Contribution to conferencePosterResearch

Equivalent Circuit Description for UHF-RFID Tag Antennas Utilizing Inductively Coupled Feeding Structures

Bauernfeind, T., Preis, K., Koczka, G., Renhart, W. & Biro, O., 15 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Equivalent Circuit Description for UHF-RFID Tag Antennas Utilizing Inductively Coupled Feeding Structures

Bauernfeind, T., Preis, K., Koczka, G., Renhart, W. & Biro, O., 2011, Proceedings of the 11th International Conference on Telecommunications. ., p. 23-30

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fast Time-Domain Finite Element Analysis of 3-D Nonlinear Time-Periodic Eddy Current Problems With T,Phi-Phi Formulation

Biro, O., Koczka, G. & Preis, K., 2011, In : IEEE Transactions on Magnetics. 47, 5, p. 1170-1173

Research output: Contribution to journalArticleResearchpeer-review

Frequency Domain Evaluation of Transient Finite Element Simulations of Induction Machines

Rainer, S., Biro, O., Stermecki, A. & Weilharter, B., 2011, Conference on the Computation of Electromagnetic Fields. ., p. ID 597-ID 597

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Frequency Domain Evaluation of Transient Finite Element Simulations of Induction Machines

Rainer, S., Biro, O., Stermecki, A. & Weilharter, B., 2011.

Research output: Contribution to conferencePosterResearch

Geometric multigrid with plane smoothing for thin elements in 3-D magnetostatic field calculation

Chen, C. & Biro, O., 2011.

Research output: Contribution to conferencePosterResearch

Geometric multigrid with plane smoothing for thin elements in 3-D magnetostatic field calculation

Chen, C. & Biro, O., 2011, Proceedings of the 18th Conference on the Computation of Electromagnetic Fields. ., p. 243-243

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of the Non-Linear UHF-RFID IC Impedance on the Backscatter Abilities of a T-Match Tag Antenna Design

Bauernfeind, T., Preis, K., Koczka, G., Maier, S. & Biro, O., 2011.

Research output: Contribution to conferencePosterResearch

Influence of the Non-Linear UHF-RFID IC Impedance on the Backscatter Abilities of a T-Match Tag Antenna Design

Bauernfeind, T., Preis, K., Koczka, G., Maier, S. & Biro, O., 2011, Proceedings of the 18th International Conference on the Computation of Electromagnetic Fields. ., p. 14-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multiphysical Computations of the Electrical Machines Using FEM

Stermecki, A., Biro, O., Hettegger, M., Lang, H., Ofner, G., Rainer, S. & Weilharter, B., 20 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Multiphysical Computations of the Electrical Machines Using FEM

Stermecki, A., Biro, O., Hettegger, M., Lang, H., Ofner, G., Rainer, S. & Weilharter, B., 2011, Computational Methods for Coupled Problems in Science and Engineering IV. ., p. 460-471

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical Analysis of Steady-State Operation of Induction Motors by an Approximate Frequency Domain Technique

Stermecki, A., Biro, O., Preis, K., Rainer, S. & Ofner, G., 2011, In : e&i - Elektrotechnik und Informationstechnik. 128, p. 81-85

Research output: Contribution to journalArticleResearchpeer-review

Numerical investigation of the 3D vibrational behaviour of skewed induction machines due to rotating force waves

Weilharter, B., Biro, O. & Rainer, S., 2011.

Research output: Contribution to conferencePosterResearch

Numerical investigation of the 3D vibrational behaviour of skewed induction machines due to rotating force waves

Weilharter, B., Biro, O. & Rainer, S., 2011, (Accepted/In press) ISEF 2011 - International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical Simulation of Electromagnetic Phenomena in Motor End-Regions

Stermecki, A., Biro, O., Ofner, G. & Lang, H., 2011, In : e&i - Elektrotechnik und Informationstechnik. 128, p. 167-173

Research output: Contribution to journalArticleResearchpeer-review

Numerical Simulation of the End-Winding Deformations in the Synchronous Machine under Short-Circuit Conditions using FEM

Lang, H., Stermecki, A., Biro, O. & Ofner, G., 2011, In : e&i - Elektrotechnik und Informationstechnik. 128, p. 161-166

Research output: Contribution to journalArticleResearchpeer-review

Numerische und Experimentelle Modalanalyse eines Statorblechpaketes

Mair, M., Rainer, S., Weilharter, B., Ellermann, K. & Biro, O., 2011, Proceedings in Applied Mathematics and Mechanics. Weinheim: Wiley-VCH , Vol. 11. p. 245-246

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

REPORT ON THE CHRISTIAN DOPPLER LABORATORY MULTIPHYSICAL SIMULATION, ANALYSIS AND DESIGN OF ELECTRICAL MACHINES

Biro, O., 2011, In : e&i - Elektrotechnik und Informationstechnik. 128, 5, p. a21-a23

Research output: Contribution to journalArticleResearchpeer-review

Review of Eddy Current Analysis

Biro, O., 2011, The 8th International Conference on Computation in Electromagnetics. ., p. 43-43

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Steady-State Analysis of Power Transformers under DC Bias by the Finite Element Method with the Fixed Point Technique

Biro, O., Chen, Y., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2011, Proceedings of the 18th International Conference on the Computation of Electromagnetic Fields. ., p. 429-429

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steady-State Analysis of Power Transformers under DC Bias by the Finite Element Method with the Fixed Point Technique

Biro, O., Chen, Y., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2011.

Research output: Contribution to conferencePosterResearch

Wissenschaftlicher Jahresbericht 2011

Biro, O., 2011, .

Research output: Book/ReportCommissioned reportResearch

Open Access
File
2012

3-D Eddy Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling

Handgruber, P., Stermecki, A., Biro, O., Belahcen, A. & Dlala, E., 2012, International Conference on Electrical Machines. ., p. 16-22

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

3-D Eddy Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling

Handgruber, P., Stermecki, A., Biro, O., Belahcen, A. & Dlala, E., 2 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Additional Eddy Current Losses in Induction Machines Due to Interlaminar Short Circuits

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2012, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 190-197

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Additional Eddy Current Losses in Induction Machines Due to Interlaminar Short Circuits

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 17 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An Improved Physical Phase Variable Model for Permanent Magnet Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

An Improved Physical Phase Variable Model for Permanent Magnet Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012, International Conference on Electrical Machines. ., p. 53-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An Improved Physical Phase Variable Model for Wound Rotor Induction Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012, Biennial IEEE Conference on Electromagnetic Field Computation. ., p. 274-274

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An Iterative Domain Decomposition Method for Solving Wave Propagation Problems

Koczka, G., Preis, K., Bauernfeind, T. & Biro, O., 2012, International Workshop on Finite Elements for Microwave Engineering. ., p. 66-66

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An Iterative Domain Decomposition Method for Solving Wave Propagation Problems

Koczka, G., Preis, K., Bauernfeind, T. & Biro, O., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Physical Phase Variable Model for Wound Rotor Induction Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

Computation of rotating force waves in skewed induction machines using multi-slice models

Weilharter, B., Biro, O., Rainer, S. & Stermecki, A., 2012.

Research output: Contribution to conferencePosterResearch

Experimental investigation of the 3D vibrational behaviour of an induction machine

Weilharter, B., Biro, O., Lang, H., Ofner, G. & Rainer, S., 2012, 2012 XXth International Conference on Electrical Machines. ., p. 1686-1692

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental investigation of the 3D vibrational behaviour of an induction machine

Weilharter, B., Biro, O., Lang, H., Ofner, G. & Rainer, S., 4 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Finite Element Based Modeling of Wound Rotor Induction Machines (Parameter Identification)

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012.

Research output: Contribution to conferencePosterResearch

Heat Transfer Analysis on End Windings of a Hydro Generator using a Stator-Slot-Sector Model

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2012, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. Graz: ., p. 41-46

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review