Armin Zankel

Dipl.-Ing. Dr.techn.

19952019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

2019

Cobalt Ferrite Nanoparticles for Three-Dimensional Visualization of Micro- and Nanostructured Cellulose in Paper

Hobisch, M., Fischer, W. J., Zankel, A., Eckhart, R., Bauer, W., Zabler, S., Spirk, S. & Müller, D., 23 May 2019, In : ACS Applied Nano Materials. 2019, p. 3864-3869 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Combined Effect of the Morphology and Rate of Addition of Fine Cellulosic Materials Produced from Chemical Pulp on Paper Properties

Bossu, J., Czibula, C. V., Winter, A., Gindl-Altmutter, W., Eckhart, R., Zankel, A. & Bauer, W., May 2019, Proceedings of the International Paper Physics Conference 2019: Held in conjunction with PaperCon 2019, May 5-8, 2019, Indianapolis. Tappi Press, p. 247-259 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
Chemical pulp
Cellulose
Air permeability
Mechanical properties
Papermaking

Correlative and Automated Particle Analysis by SEM, EDXS and Raman: Features and Limitations

Nachtnebel, M., Schmidt, R., Fitzek, H. M., Mayrhofer, C., Zankel, A. & Schröttner, H., Apr 2019, Conference Proceedings. p. 47-50 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Correlative Microscopy - The New System RISE Combined With EDXS Applied on Complex Materials

Schmidt, R., Nachtnebel, M., Fitzek, H. M., Mayrhofer, C., Schröttner, H. & Zankel, A., Apr 2019, Workshop Handbook:Program & Abstract. p. 29

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Correlative Raman microscopy, SEM and EDX – examples of application and application and best practice

Fitzek, H. M., Schmidt, R., Nachtnebel, M., Mayrhofer, C., Zankel, A. & Schröttner, H., 2019, Proceedings-14th Multinational Congress on Microscopy, Belgrad-Serbia, Sept. 15-20 2019. p. 72-73

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Correlative Raman microscopy, SEM and EDX – synergies and best practices

Fitzek, H. M., Schmidt, R., Nachtnebel, M., Mayrhofer, C., Zankel, A. & Schröttner, H., 2019, (Accepted/In press) ICVAS.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fine Cellulosic Materials Produced from Chemical Pulp: the Combined Effect of Morphology and Rate of Addition on Paper Properties

Bossu, J., Eckhart, R., Czibula, C., Winter, A., Zankel, A., Gindl-Altmutter, W. & Bauer, W., 1 Mar 2019, In : Nanomaterials. 9, 3, 17 p., 321.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
chemical pulp
cellulosic materials
papermaking
cellulose
mechanical pulp

Localization of Cellulosic Fines in paper Sheets

Hobisch, M., Mueller, D., Fischer, W. J., Zankel, A., Bauer, W., Eckhart, R., Zabler, S. & Spirk, S., Apr 2019, p. 88. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

Raman Imaging and Scanning Electron Microscopy (RISE) combined with EDX: correlativemicroscopy for different fields of science and technology

Zankel, A., 2019, Program MC2019/Mini lunchtime lecture: Carl Zeiss Microscopy GmbH. Vol. Program. p. 62 H 0111

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

The combination of electron microscopy, Raman microscopy and energydispersive X-ray spectroscopy – new methodic possibilities for materialsscience

Zankel, A., Fitzek, H. M., Mayrhofer, C., Nachtnebel, M., Schmidt, R. & Schröttner, H., 2019, Abstract MC 2019. p. 385 IM1.P018

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Three Dimensional Localization and Visualization of Paper Fines in Sheets

Hobisch, M., Müller, D., Eckhart, R., Fischer, W., Zankel, A., Bauer, W., Zabler, S. & Spirk, S., 4 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

2018

Alginate and chitosan as a functional barrier for paper-based packaging materials

Kopacic, S., Walzl, A., Zankel, A., Leitner, E. & Bauer, W., 3 Jul 2018, In : Coatings. 8, 7, 15 p., 235.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Packaging materials
Alginate
Chitosan
packaging
Mineral Oil
Open Access
Chitosan
Surface treatment
Drying
Biopolymers
Coatings

Barrier Coating of Paperboard

Kopacic, S., Bauer, W., Walzl, A., Kniely, R. & Zankel, A., 14 Nov 2018, DITP .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Correlative Scanning Electron Microscopy and Raman Microscopy-Synergies and best Practices

Fitzek, H. M., Zankel, A., Nachtnebel, M., Schmidt, R., Mayrhofer, C. & Schröttner, H., 10 Sep 2018, p. 108.

Research output: Contribution to conferencePosterResearch

Correlative Scanning Electron Microscopy and Raman Microscopy-Synergies and best Practices

Fitzek, H. M., Zankel, A., Nachtnebel, M., Schmidt, R., Mayrhofer, C. & Schröttner, H., 10 Sep 2018, p. 108-109. 1 p.

Research output: Contribution to conferenceAbstractResearch

Deposition of Cellulose based Thin Films on Flexible Substrates

Schlemmer, W., Zankel, A., Niegelhell, K., Hobisch, M., Süßenbacher, M., Zajki-Zechmeister, K., Weißl, M., Reishofer, D., Plank, H. & Spirk, S., 2018, In : Materials. 11, 12, 2433.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Fracture behavior of polymer blends – Can particles, cracks and crystallinity be combined in one 3D representation?

Zankel, A., Theissing, M., Nachtnebel, M., Mayrhofer, C., Gahleitner, M. & Pölt, P., 2018, p. 127. 1 p.

Research output: Contribution to conferenceAbstractResearchpeer-review

From Electron Microscopy to 3D Printing: Serial Block-Face Scanning Electron Microscopy of Spores

Zankel, A., Nachtnebel, M., Mayrhofer, C. & Wechsler, K., Mar 2018, In : Imaging & microscopy. 2018, 1, p. 38-40

Research output: Contribution to journalArticleResearch

Green Procedure to Manufacture Nanoparticle-Decorated Paper Substrates

Schlemmer, W., Fischer, W. J., Zankel, A., Vukušić, T., Filipič, G., Jurov, A., Blažeka, D., Goessler, W., Bauer, W., Spirk, S. & Krstulović, N., 2018, In : Materials. 11, 12, 2412.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Homogeneous cellulose thin films by regeneration of cellulose xanthate: properties and characterization

Weißl, M., Niegelhell, K., Reishofer, D., Zankel, A., Innerlohinger, J. & Spirk, S., 2018, In : Cellulose. 25, 1, p. 711-721 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
2017

3D-Reconstruction of cracks in polymers – New insight in the fracture behaviour?

Nachtnebel, M., Zankel, A., Mayrhofer, C., Gahleitner, M. & Pölt, P., 2017, Deformation and Fracture Behaviour of Polymer Materials. 1 ed. Springer International Publishing AG , (Springer Series in Materials Science; vol. 247).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Acoustic Emission Analysis for Assessment of Damage Kinetics of Short-Glass Fibre-Reinforced Thermoplastics-ESEM Investigations and Instrumented Charpy Impact Test

Schoßig, M., Zankel, A., Bierögel, C., Pölt, P. & Grellmann, W., 2017, Deformation and Fracture Behaviour of Polymer Materials: Advanced Structure-Sensitive Methods for Analysing Cracks and Fracture Surfaces. Springer International Publishing AG , Vol. 247. p. 139-164 Chapter 10. (Springer Series in Materials Science ; vol. 247).

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Characterisation of polymers in the scanning electron microscope from low voltage surface imaging to the 3D reconstruction of specimens

Zankel, A., Nachtnebel, M., Mayrhofer, C. & Wewerka, K., 2017, Deformation and Fracture Behaviour of Polymer Materials. Grellmann, W. & Langer, B. (eds.). 1 ed. Springer International Publishing AG , (Springer Series in Materials Science; vol. 247).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Cold Plasma and Femtosecond Laser Treatment for the Modification of Cellulose based Thin Films

Schlemmer, W., Krstulović, N., Reishofer, D., Zankel, A., Trimmel, G. & Spirk, S., Aug 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Fracture mechanics characterisation of peelfilms

Nase, M., Rennert, M., Henning, S., Zankel, A., Naumenko, K. & Grellmann, W., 2017, Springer Series in Materials Science. Springer Verlag Wien, Vol. 247. p. 271-281 11 p. (Springer Series in Materials Science; vol. 247).

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Fracture mechanics
Energy release rate
Adhesives
Polyethylene
Polybutenes

Fracture mechanics characterization of peel films

Nase, M., Rennert, M., Henning, S., Zankel, A., Naumenko, K. & Grellmann, W., 2017, Deformation and Fracture Behaviour of Polymer Materials. Grellmann, W. & Langer, B. (eds.). Cham: Springer International Publishing AG , (Springer Series in Materials Science; vol. 247).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Morphological Properties of Methacrylate-Based Polymer Monoliths: From Gel Porosity to Macroscopic Inhomogeneities

Müllner, T., Zankel, A., Höltzel, A., Svec, F. & Tallarek, U., 2017, In : Langmuir. 33, 9, p. 2205-2214

Research output: Contribution to journalArticleResearchpeer-review

Nonspecific protein adsorption on cationically modified Lyocell fibers monitored by zeta potential measurements

Payerl, C., Bracic, M., Zankel, A., Fischer, W. J., Kaschowitz, M., Fröhlich, E., Kargl, R., Stelzer, F. & Spirk, S., 26 Jan 2017, In : Carbohydrate Polymers. 164, p. 49-56

Research output: Contribution to journalArticleResearchpeer-review

Polymer fracture – Analysis by 3D reconstructions of the fracture region

Nachtnebel, M., Mayrhofer, C., Zankel, A. & Pölt, P., 2017, 13th Multinational Congress on Microscopy September 24-29, 2017 in Rovinj, Croatia. p. 556-558

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Polymer fracture – What can the 3D reconstruction of the crack region tell us about the microscopic fracture mechanisms

Nachtnebel, M., Mayrhofer, C., Zankel, A. & Pölt, P., 2017, ASEM. p. 48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Pulp Fines—Characterization, Sheet Formation, and Comparison to Microfibrillated Cellulose

Fischer, J. W., Mayr, M., Spirk, S., Reishofer, D., Jagiello, A. L., Schmiedt, R., Colson, J., Zankel, A. & Bauer, W., 17 Aug 2017, In : Polymers . 9, 8

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Reconstructing a looming sensitive pathway in locusts using serial block-face SEM (SBEM)

Wernitznig, S., Zankel, A., Rind, C., Summerauer, S., Nikolic, M., Sele, M., Pölt, P. & Leitinger, G., 2017, 13th Multinational Congress on Microscopy September 24-29, 2017 in Rovinj, Croatia. p. 397-398

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Reconstructing a looming sensitive pathway in locusts using serial block-face SEM (SBEM)

Wernitznig, S., Zankel, A., Rind, C., Summerauer, S., Nikolic, M., Sele, M., Pölt, P. & Leitinger, G., 2017.

Research output: Contribution to conferencePosterResearch

Regenerated cellulose fiber solar cell

Ebner, M., Schennach, R., CHIEN, H-T., Mayrhofer, C., Zankel, A. & Friedel, B., 2017, In : Flexible and Printed Electronics. 2, 1, 014002 .

Research output: Contribution to journalArticleResearchpeer-review

Open Access

The fracture behavior of particle modified polypropylene - 3D reconstructions and interparticle distances

Nachtnebel, M., Rastel, M., Mayrhofer, C., Zankel, A., Gahleitner, M. & Pölt, P., 2017, In : Polymer. 126, p. 65-73

Research output: Contribution to journalArticleResearchpeer-review

2016

Analysis of the fracture behavior of polymers – 2D compared to 3D

Poelt, P., Nachtnebel, M., Zankel, A., Mayrhofer, C. & Gahleitner, M., 17 Jun 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis of the fracture behavior of polymers – 2D compared to 3D

Pölt, P., Nachtnebel, M., Zankel, A., Mayrhofer, C. & Gahleitner, M., 15 Jun 2016, Abstractband Polymertec 16. p. 104 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

An Esterase from Anaerobic Clostridium hathewayi Can Hydrolyze Aliphatic−Aromatic Polyesters

Perz, V., Hromic, A., Steinkellner, G., Pavkov-Keller, T., Gruber, K., Bleymaier, K., Zitzenbacher, S., Zankel, A., Mayrhofer, C., Sinkel, C., Kueper, U., Schlegel, K., Ribitsch, D. & Guebitz, G. M., 2016, In : Environmental science & technology. 50, p. 2899-2907 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Optimizing the 3D-reconstruction technique for serial block-face scanning electron microscopy

Wernitznig, S., Sele, M., Urschler, M., Zankel, A., Pölt, P., Rind, F. C. & Leitinger, G., 27 Feb 2016, In : Journal of neuroscience methods. 264, p. 16-24 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Electron Scanning Microscopy
Neurons
Anatomy
Locusta migratoria
Grasshoppers

Synergy of SEM and Ultramicrotomy: SBEM Spreading from Life Sciences to Materials Science

Zankel, A., Wernitznig, S. & Nachtnebel, M., 2016, In : Imaging & microscopy. 18 Nr. 4, p. 34-36

Research output: Contribution to journalArticleResearchpeer-review

Two identified looming detectors in the locust: ubiquitous lateral connections among their inputs contribute to selective responses to looming objects

Rind, C., Wernitznig, S., Pölt, P., Zankel, A., Gütl, D., Leitinger, G. & Gütl, D., 2016, In : Scientific reports. p. 6:35525

Research output: Contribution to journalArticleResearchpeer-review