Temperature and heat effects on polyethylene behaviour in the presence of imperfections

Alin Constantin Murariu; Jasmina Lozanovic Sajic

doi:10.2298/TSCI151110220M

Temperature and heat effects on polyethylene behaviour in the presence of imperfections

Alin Constantin Murariu, Jasmina Lozanovic Sajic

Publikation: Beitrag in einer Fachzeitschrift › Artikel › Begutachtung

Abstract

This paper highlights the changes of polyethylene behaviour during various loading rate as well as the influence of test temperature on the material characteristics. Passive infrared thermography (IRT) method and a high speed infrared camera were used to observe the temperature changes of the sample surface during the tests. The experimental program was carried out on samples taken from PE80 polyethylene gas pipes with simulated imperfections with bilateral V-notch, U-notch and central hole. Samples have been tensile tested (TT) and the results are correlated with the temperature distribution of the samples surface.

Originalsprache	englisch
Seiten (von - bis)	1703-1712
Seitenumfang	10
Fachzeitschrift	Thermal Science
Jahrgang	20
Ausgabenummer	5
DOIs	https://doi.org/10.2298/TSCI151110220M
Publikationsstatus	Veröffentlicht - 2016
Extern publiziert	Ja

ASJC Scopus subject areas

Erneuerbare Energien, Nachhaltigkeit und Umwelt

UN SDGs

Dieser Output leistet einen Beitrag zu folgendem(n) Ziel(en) für nachhaltige Entwicklung

Zugriff auf Dokument

10.2298/TSCI151110220MLizenz: CC BY-NC-ND 4.0

Andere Dateien und Links

http://www.scopus.com/inward/record.url?scp=85027836706&partnerID=8YFLogxK

Dieses zitieren

@article{291de436a0e04ae59f2ae41f70fe5b3e,

title = "Temperature and heat effects on polyethylene behaviour in the presence of imperfections",

abstract = "This paper highlights the changes of polyethylene behaviour during various loading rate as well as the influence of test temperature on the material characteristics. Passive infrared thermography (IRT) method and a high speed infrared camera were used to observe the temperature changes of the sample surface during the tests. The experimental program was carried out on samples taken from PE80 polyethylene gas pipes with simulated imperfections with bilateral V-notch, U-notch and central hole. Samples have been tensile tested (TT) and the results are correlated with the temperature distribution of the samples surface.",

keywords = "tensile tests, polyethylene pipes, infrared thermography, imperfections",

author = "Murariu, {Alin Constantin} and {Lozanovic Sajic}, Jasmina",

year = "2016",

doi = "10.2298/TSCI151110220M",

language = "English",

volume = "20",

pages = "1703--1712",

journal = "Thermal Science",

issn = "0354-9836",

publisher = "Vin{\v c}a Institute of Nuclear Sciences",

number = "5",

}

TY - JOUR

T1 - Temperature and heat effects on polyethylene behaviour in the presence of imperfections

AU - Murariu, Alin Constantin

AU - Lozanovic Sajic, Jasmina

PY - 2016

Y1 - 2016

N2 - This paper highlights the changes of polyethylene behaviour during various loading rate as well as the influence of test temperature on the material characteristics. Passive infrared thermography (IRT) method and a high speed infrared camera were used to observe the temperature changes of the sample surface during the tests. The experimental program was carried out on samples taken from PE80 polyethylene gas pipes with simulated imperfections with bilateral V-notch, U-notch and central hole. Samples have been tensile tested (TT) and the results are correlated with the temperature distribution of the samples surface.

AB - This paper highlights the changes of polyethylene behaviour during various loading rate as well as the influence of test temperature on the material characteristics. Passive infrared thermography (IRT) method and a high speed infrared camera were used to observe the temperature changes of the sample surface during the tests. The experimental program was carried out on samples taken from PE80 polyethylene gas pipes with simulated imperfections with bilateral V-notch, U-notch and central hole. Samples have been tensile tested (TT) and the results are correlated with the temperature distribution of the samples surface.

KW - tensile tests

KW - polyethylene pipes

KW - infrared thermography

KW - imperfections

UR - http://www.scopus.com/inward/record.url?scp=85027836706&partnerID=8YFLogxK

U2 - 10.2298/TSCI151110220M

DO - 10.2298/TSCI151110220M

M3 - Article

AN - SCOPUS:85027836706

SN - 0354-9836

VL - 20

SP - 1703

EP - 1712

JO - Thermal Science

JF - Thermal Science

IS - 5

ER -