Affinity of Serum Albumin and Fibrinogen to Cellulose, Its Hydrophobic Derivatives and Blends

Rupert Kargl, Matej Bračič, Matic Resnik, Miran Mozetič, Wolfgang Bauer, Karin Stana Kleinschek, Tamilselvan Mohan

Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

Abstract

This work describes the preparation of spin-coated thin polymer films composed of cellulose (CE), ethyl cellulose (EC), and cellulose acetate (CA) in the form of bi- or mono-component coatings on sensors of a quartz crystal microbalance with dissipation monitoring (QCM-D). Depending on the composition and derivative, hydrophilicity can be varied resulting in materials with different surface properties. The surfaces of mono- and bi-component films were also analyzed by atomic force microscopy (AFM) and large differences in the morphologies were found comprising nano- to micrometer sized pores. Extended protein adsorption studies were performed by a QCM-D with 0.1 and 10 mg mL−1 bovine serum albumin (BSA) and 0.1 and 1 mg mL−1 fibrinogen from bovine plasma in phosphate buffered saline. Analysis of the mass of bound proteins was conducted by applying the Voigt model and a comparison was made with the Sauerbrey wet mass of the proteins for all films. The amount of deposited proteins could be influenced by the composition of the films. It is proposed that the observed effects can be exploited in biomaterial science and that they can be used to extent the applicability of bio-based polymer thin films composed of commercial cellulose derivatives.

Originalspracheenglisch
Aufsatznummer581
FachzeitschriftFrontiers in Chemistry
Jahrgang7
DOIs
PublikationsstatusVeröffentlicht - 6 Sep 2019

Fingerprint

Serum Albumin
Cellulose
Fibrinogen
Derivatives
Quartz crystal microbalances
Polymer films
Proteins
Cellulose derivatives
Thin films
Monitoring
Hydrophilicity
Biocompatible Materials
Bovine Serum Albumin
Chemical analysis
Surface properties
Atomic force microscopy
Phosphates
Plasmas
Adsorption
Coatings

Schlagwörter

    ASJC Scopus subject areas

    • !!Chemistry(all)

    Dies zitieren

    Affinity of Serum Albumin and Fibrinogen to Cellulose, Its Hydrophobic Derivatives and Blends. / Kargl, Rupert; Bračič, Matej; Resnik, Matic; Mozetič, Miran; Bauer, Wolfgang; Stana Kleinschek, Karin; Mohan, Tamilselvan.

    in: Frontiers in Chemistry, Jahrgang 7, 581, 06.09.2019.

    Publikation: Beitrag in einer FachzeitschriftArtikelForschungBegutachtung

    @article{759c02158b5e4d73be10432f20a65890,
    title = "Affinity of Serum Albumin and Fibrinogen to Cellulose, Its Hydrophobic Derivatives and Blends",
    abstract = "This work describes the preparation of spin-coated thin polymer films composed of cellulose (CE), ethyl cellulose (EC), and cellulose acetate (CA) in the form of bi- or mono-component coatings on sensors of a quartz crystal microbalance with dissipation monitoring (QCM-D). Depending on the composition and derivative, hydrophilicity can be varied resulting in materials with different surface properties. The surfaces of mono- and bi-component films were also analyzed by atomic force microscopy (AFM) and large differences in the morphologies were found comprising nano- to micrometer sized pores. Extended protein adsorption studies were performed by a QCM-D with 0.1 and 10 mg mL−1 bovine serum albumin (BSA) and 0.1 and 1 mg mL−1 fibrinogen from bovine plasma in phosphate buffered saline. Analysis of the mass of bound proteins was conducted by applying the Voigt model and a comparison was made with the Sauerbrey wet mass of the proteins for all films. The amount of deposited proteins could be influenced by the composition of the films. It is proposed that the observed effects can be exploited in biomaterial science and that they can be used to extent the applicability of bio-based polymer thin films composed of commercial cellulose derivatives.",
    keywords = "albumin, cellulose acetate, ethyl cellulose, fibrinogen, hydrophilicity, protein adsorption, quartz crystal microbalance",
    author = "Rupert Kargl and Matej Bračič and Matic Resnik and Miran Mozetič and Wolfgang Bauer and {Stana Kleinschek}, Karin and Tamilselvan Mohan",
    year = "2019",
    month = "9",
    day = "6",
    doi = "10.3389/fchem.2019.00581",
    language = "English",
    volume = "7",
    journal = "Frontiers in Chemistry",
    issn = "2296-2646",
    publisher = "Frontiers Media S. A.",

    }

    TY - JOUR

    T1 - Affinity of Serum Albumin and Fibrinogen to Cellulose, Its Hydrophobic Derivatives and Blends

    AU - Kargl, Rupert

    AU - Bračič, Matej

    AU - Resnik, Matic

    AU - Mozetič, Miran

    AU - Bauer, Wolfgang

    AU - Stana Kleinschek, Karin

    AU - Mohan, Tamilselvan

    PY - 2019/9/6

    Y1 - 2019/9/6

    N2 - This work describes the preparation of spin-coated thin polymer films composed of cellulose (CE), ethyl cellulose (EC), and cellulose acetate (CA) in the form of bi- or mono-component coatings on sensors of a quartz crystal microbalance with dissipation monitoring (QCM-D). Depending on the composition and derivative, hydrophilicity can be varied resulting in materials with different surface properties. The surfaces of mono- and bi-component films were also analyzed by atomic force microscopy (AFM) and large differences in the morphologies were found comprising nano- to micrometer sized pores. Extended protein adsorption studies were performed by a QCM-D with 0.1 and 10 mg mL−1 bovine serum albumin (BSA) and 0.1 and 1 mg mL−1 fibrinogen from bovine plasma in phosphate buffered saline. Analysis of the mass of bound proteins was conducted by applying the Voigt model and a comparison was made with the Sauerbrey wet mass of the proteins for all films. The amount of deposited proteins could be influenced by the composition of the films. It is proposed that the observed effects can be exploited in biomaterial science and that they can be used to extent the applicability of bio-based polymer thin films composed of commercial cellulose derivatives.

    AB - This work describes the preparation of spin-coated thin polymer films composed of cellulose (CE), ethyl cellulose (EC), and cellulose acetate (CA) in the form of bi- or mono-component coatings on sensors of a quartz crystal microbalance with dissipation monitoring (QCM-D). Depending on the composition and derivative, hydrophilicity can be varied resulting in materials with different surface properties. The surfaces of mono- and bi-component films were also analyzed by atomic force microscopy (AFM) and large differences in the morphologies were found comprising nano- to micrometer sized pores. Extended protein adsorption studies were performed by a QCM-D with 0.1 and 10 mg mL−1 bovine serum albumin (BSA) and 0.1 and 1 mg mL−1 fibrinogen from bovine plasma in phosphate buffered saline. Analysis of the mass of bound proteins was conducted by applying the Voigt model and a comparison was made with the Sauerbrey wet mass of the proteins for all films. The amount of deposited proteins could be influenced by the composition of the films. It is proposed that the observed effects can be exploited in biomaterial science and that they can be used to extent the applicability of bio-based polymer thin films composed of commercial cellulose derivatives.

    KW - albumin

    KW - cellulose acetate

    KW - ethyl cellulose

    KW - fibrinogen

    KW - hydrophilicity

    KW - protein adsorption

    KW - quartz crystal microbalance

    UR - http://www.scopus.com/inward/record.url?scp=85072828986&partnerID=8YFLogxK

    U2 - 10.3389/fchem.2019.00581

    DO - 10.3389/fchem.2019.00581

    M3 - Article

    VL - 7

    JO - Frontiers in Chemistry

    JF - Frontiers in Chemistry

    SN - 2296-2646

    M1 - 581

    ER -