The shielding effect of a multi-cable harness as function of IC output termination impedance

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abstract

Integrated circuits for automotive applications must not violate certain limits for maximum electromagnetic emissions. One of many standardized compliance tests is the CISPR 25 ALSE test, where the radiated emission from a straight cable harness attached to a device is evaluated. For devices with multiple outputs this harness may contain multiple cables. It is critical to understand, that non-operated cables have a certain shielding effect, which is a function of their termination impedance. The radiated emission originating from a harness consisting of multiple cables will, in some cases, be drastically lower than that of a single wire. By applying fundamental electrostatic relations this paper demonstrates how to estimate the deviation by simple calculations. The analytical results are compared to measurements and 3D EM simulation.

LanguageEnglish
Title of host publication2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018
PublisherInstitute of Electrical and Electronics Engineers
Pages707-712
Number of pages6
ISBN (Electronic)9781509059973
DOIs
StatusPublished - 22 Jun 2018
Event60th IEEE International Symposium on Electromagnetic Compatibility and 9th IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018 - Suntec City, Singapore
Duration: 14 May 201818 May 2018

Conference

Conference60th IEEE International Symposium on Electromagnetic Compatibility and 9th IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018
CountrySingapore
CitySuntec City
Period14/05/1818/05/18

Fingerprint

harnesses
Shielding
cables
shielding
Cables
impedance
output
Acceptance tests
integrated circuits
Integrated circuits
Electrostatics
wire
Wire
electrostatics
electromagnetism
deviation
estimates
simulation

Keywords

  • 3D simulation
  • ALSE
  • CISPR 25
  • Electromagnetic compatibility
  • Electrostatic
  • Harness
  • IC output termination
  • Radiated emission

ASJC Scopus subject areas

  • Aerospace Engineering
  • Electrical and Electronic Engineering
  • Safety, Risk, Reliability and Quality
  • Radiation

Fields of Expertise

  • Information, Communication & Computing

Cite this

Hackl, H., Auinger, B., Deutschmann, B., & Gheonjian, A. (2018). The shielding effect of a multi-cable harness as function of IC output termination impedance. In 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018 (pp. 707-712). Institute of Electrical and Electronics Engineers. DOI: 10.1109/ISEMC.2018.8393873

The shielding effect of a multi-cable harness as function of IC output termination impedance. / Hackl, Herbert; Auinger, Bernhard; Deutschmann, Bernd; Gheonjian, Anna.

2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018. Institute of Electrical and Electronics Engineers, 2018. p. 707-712.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hackl, H, Auinger, B, Deutschmann, B & Gheonjian, A 2018, The shielding effect of a multi-cable harness as function of IC output termination impedance. in 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018. Institute of Electrical and Electronics Engineers, pp. 707-712, 60th IEEE International Symposium on Electromagnetic Compatibility and 9th IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018, Suntec City, Singapore, 14/05/18. DOI: 10.1109/ISEMC.2018.8393873
Hackl H, Auinger B, Deutschmann B, Gheonjian A. The shielding effect of a multi-cable harness as function of IC output termination impedance. In 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018. Institute of Electrical and Electronics Engineers. 2018. p. 707-712. Available from, DOI: 10.1109/ISEMC.2018.8393873
Hackl, Herbert ; Auinger, Bernhard ; Deutschmann, Bernd ; Gheonjian, Anna. / The shielding effect of a multi-cable harness as function of IC output termination impedance. 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018. Institute of Electrical and Electronics Engineers, 2018. pp. 707-712
@inproceedings{be051b69900d4812991e06dd248c2df2,
title = "The shielding effect of a multi-cable harness as function of IC output termination impedance",
abstract = "Integrated circuits for automotive applications must not violate certain limits for maximum electromagnetic emissions. One of many standardized compliance tests is the CISPR 25 ALSE test, where the radiated emission from a straight cable harness attached to a device is evaluated. For devices with multiple outputs this harness may contain multiple cables. It is critical to understand, that non-operated cables have a certain shielding effect, which is a function of their termination impedance. The radiated emission originating from a harness consisting of multiple cables will, in some cases, be drastically lower than that of a single wire. By applying fundamental electrostatic relations this paper demonstrates how to estimate the deviation by simple calculations. The analytical results are compared to measurements and 3D EM simulation.",
keywords = "3D simulation, ALSE, CISPR 25, Electromagnetic compatibility, Electrostatic, Harness, IC output termination, Radiated emission",
author = "Herbert Hackl and Bernhard Auinger and Bernd Deutschmann and Anna Gheonjian",
year = "2018",
month = "6",
day = "22",
doi = "10.1109/ISEMC.2018.8393873",
language = "English",
pages = "707--712",
booktitle = "2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018",
publisher = "Institute of Electrical and Electronics Engineers",
address = "United States",

}

TY - GEN

T1 - The shielding effect of a multi-cable harness as function of IC output termination impedance

AU - Hackl,Herbert

AU - Auinger,Bernhard

AU - Deutschmann,Bernd

AU - Gheonjian,Anna

PY - 2018/6/22

Y1 - 2018/6/22

N2 - Integrated circuits for automotive applications must not violate certain limits for maximum electromagnetic emissions. One of many standardized compliance tests is the CISPR 25 ALSE test, where the radiated emission from a straight cable harness attached to a device is evaluated. For devices with multiple outputs this harness may contain multiple cables. It is critical to understand, that non-operated cables have a certain shielding effect, which is a function of their termination impedance. The radiated emission originating from a harness consisting of multiple cables will, in some cases, be drastically lower than that of a single wire. By applying fundamental electrostatic relations this paper demonstrates how to estimate the deviation by simple calculations. The analytical results are compared to measurements and 3D EM simulation.

AB - Integrated circuits for automotive applications must not violate certain limits for maximum electromagnetic emissions. One of many standardized compliance tests is the CISPR 25 ALSE test, where the radiated emission from a straight cable harness attached to a device is evaluated. For devices with multiple outputs this harness may contain multiple cables. It is critical to understand, that non-operated cables have a certain shielding effect, which is a function of their termination impedance. The radiated emission originating from a harness consisting of multiple cables will, in some cases, be drastically lower than that of a single wire. By applying fundamental electrostatic relations this paper demonstrates how to estimate the deviation by simple calculations. The analytical results are compared to measurements and 3D EM simulation.

KW - 3D simulation

KW - ALSE

KW - CISPR 25

KW - Electromagnetic compatibility

KW - Electrostatic

KW - Harness

KW - IC output termination

KW - Radiated emission

UR - http://www.scopus.com/inward/record.url?scp=85050094148&partnerID=8YFLogxK

U2 - 10.1109/ISEMC.2018.8393873

DO - 10.1109/ISEMC.2018.8393873

M3 - Conference contribution

SP - 707

EP - 712

BT - 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018

PB - Institute of Electrical and Electronics Engineers

ER -