TY - JOUR
T1 - Study of creep cavitation behavior in tempered martensitic steel using synchrotron micro-tomography and serial sectioning techniques
AU - Gupta, Chiradeep
AU - Toda, Hiroyuki
AU - Schlacher, Christian
AU - Adachi, Y.
AU - Mayr, Peter
AU - Sommitsch, Christof
AU - Usegi, K.
AU - Suzuki, Y.
AU - Takeuchi, A.
AU - Kobayashi, Masakazu
PY - 2013
Y1 - 2013
N2 - Two three-dimensional (3-D) techniques, namely X-ray microtomography and serial sectioning, have been applied for characterization of creep cavitation behavior in tempered martensitic steel. For this purpose samples have been extracted from a series of specimens that were subjected to creep tests over the stress range of 120–180 MPa at 600 °C. The presence of creep voids in the series of samples was un-ambiguously detected in a non-destructive manner using synchrotron X-ray microtomography with a resolution of 1 μm. The 3-D visualization of the datasets provided an assessment of the spatial distribution and morphology of the creep voids as a function of creep stress and high temperature exposure time. The quantitative analyses of the image datasets enabled the development of functional relationships between the macroscopic creep parameters (such as rupture ductility, applied stress, creep life) and cavitation characteristics (such as volume fraction, and number density). The quantitative analyses also provided an evaluation of manifestations of growth and coalescence processes in the respective datasets. A transition of cavitation behavior of the steel has been found to occur in the stress range of 120–150 MPa at 600 °C. The evolution in the pattern of cavitation and its relation to the prior-austenite boundary was explored by combining micro-tomography and serial sectioning techniques, which revealed a new possibility in the progress of cavitation in the long term creep exposed specimens of 9–12% Cr heat resistant steels.
AB - Two three-dimensional (3-D) techniques, namely X-ray microtomography and serial sectioning, have been applied for characterization of creep cavitation behavior in tempered martensitic steel. For this purpose samples have been extracted from a series of specimens that were subjected to creep tests over the stress range of 120–180 MPa at 600 °C. The presence of creep voids in the series of samples was un-ambiguously detected in a non-destructive manner using synchrotron X-ray microtomography with a resolution of 1 μm. The 3-D visualization of the datasets provided an assessment of the spatial distribution and morphology of the creep voids as a function of creep stress and high temperature exposure time. The quantitative analyses of the image datasets enabled the development of functional relationships between the macroscopic creep parameters (such as rupture ductility, applied stress, creep life) and cavitation characteristics (such as volume fraction, and number density). The quantitative analyses also provided an evaluation of manifestations of growth and coalescence processes in the respective datasets. A transition of cavitation behavior of the steel has been found to occur in the stress range of 120–150 MPa at 600 °C. The evolution in the pattern of cavitation and its relation to the prior-austenite boundary was explored by combining micro-tomography and serial sectioning techniques, which revealed a new possibility in the progress of cavitation in the long term creep exposed specimens of 9–12% Cr heat resistant steels.
UR - http://www.elsevier.com/locate/msea
U2 - 10.1016/j.msea.2012.12.002
DO - 10.1016/j.msea.2012.12.002
M3 - Article
SN - 1873-4936
VL - A564
SP - 525
EP - 538
JO - Materials Science and Engineering A
JF - Materials Science and Engineering A
ER -