Selection of the Proper Diffusion Welding Parameters for the Heterogeneous Joint Ti Grade2/AISI 316L

Jaromir Moravec, Martina Dikovits, Coline Beal, Iva Novakova, Rebecca Chandezon, Jiri Sobotka

Research output: Contribution to journalArticlepeer-review

Abstract

The creation of the heterogeneous joints at materials with the different physical and mechanical properties is always problematic. As one of methods by which can be achieved very good results is there a diffusion welding. The aim of paper is to show the possibilities of diffusion welding utilization at creation the heterogeneous joints between Titan grade 2 and high-alloyed austenitic steel AISI 316L. The fundamental theory of diffusion and also scheme and realization of experimentally created diffusion welds in the thermal-mechanical simulator Gleeble® 3500 is described in the article. Furthermore, procedure of technological parameters selection when optimization of heterogeneous joint strength properties including metallographic evaluation are taken into account, are also presented. © 2017. Published by Manufacturing Technology. All rights reserved.
Original languageEnglish
Pages (from-to)231-237
JournalManufacturing technology
Volume17
Issue number2
DOIs
Publication statusPublished - Apr 2017

Fingerprint

Dive into the research topics of 'Selection of the Proper Diffusion Welding Parameters for the Heterogeneous Joint Ti Grade2/AISI 316L'. Together they form a unique fingerprint.

Cite this