Prediction of the anisotropic mechanical properties of compacted powders

Research output: Contribution to journalArticleResearchpeer-review

Abstract

The multi-particle finite element method (MPFEM) was used to test the anisotropic elastic and plastic properties of compacted powders with cohesive contacts. A representative volume element (RVE) of monodisperse, spherical, deformable particles was used to investigate the powder properties after compaction. Efficient periodic boundary conditions and an RVE of only 50 particles allowed extensive parameter studies. During parameter studies the relative density after compaction, the contact cohesion strength and the strain path during compaction were varied. The strain paths were characterized by the ratios of the applied principal strains during compaction that results in different Dirichlet boundary conditions on the RVE. Seven different strain paths were considered including the practically important isostatic and closed die compaction. The outcome of the parameter study were the elastic constants of an orthotropic material model, the uniaxial yield strength for tension and compression, and the yield surfaces for general load cases. No anisotropy was observed for isostatic compaction but increasing anisotropy was observed with increasing ratio of the principal strains during compaction. Regression curves were generated to describe the mechanical properties as a function of the model parameters. In this way, continuous functions were obtained which were capable to describe the distribution of the mechanical material properties in a FEM model of a heterogeneous compacted powder part.

Original languageEnglish
Pages (from-to)589-600
Number of pages12
JournalPowder Technology
Volume345
DOIs
Publication statusPublished - 2019

Fingerprint

Powders
Compaction
Mechanical properties
Anisotropy
Boundary conditions
Finite element method
Elastic constants
Yield stress
Materials properties
Plastics

Keywords

  • Anisotropy
  • Cohesive particle contact
  • Elasticity
  • Multi-particle finite element method
  • Powder compaction
  • Yield surface

ASJC Scopus subject areas

  • Chemical Engineering(all)

Fields of Expertise

  • Advanced Materials Science

Cite this

Prediction of the anisotropic mechanical properties of compacted powders. / Loidolt, Peter; Ulz, Manfred Hannes; Khinast, Johannes.

In: Powder Technology, Vol. 345, 2019, p. 589-600.

Research output: Contribution to journalArticleResearchpeer-review

@article{6cd89a5233a246c5aa01bf6f7311c513,
title = "Prediction of the anisotropic mechanical properties of compacted powders",
abstract = "The multi-particle finite element method (MPFEM) was used to test the anisotropic elastic and plastic properties of compacted powders with cohesive contacts. A representative volume element (RVE) of monodisperse, spherical, deformable particles was used to investigate the powder properties after compaction. Efficient periodic boundary conditions and an RVE of only 50 particles allowed extensive parameter studies. During parameter studies the relative density after compaction, the contact cohesion strength and the strain path during compaction were varied. The strain paths were characterized by the ratios of the applied principal strains during compaction that results in different Dirichlet boundary conditions on the RVE. Seven different strain paths were considered including the practically important isostatic and closed die compaction. The outcome of the parameter study were the elastic constants of an orthotropic material model, the uniaxial yield strength for tension and compression, and the yield surfaces for general load cases. No anisotropy was observed for isostatic compaction but increasing anisotropy was observed with increasing ratio of the principal strains during compaction. Regression curves were generated to describe the mechanical properties as a function of the model parameters. In this way, continuous functions were obtained which were capable to describe the distribution of the mechanical material properties in a FEM model of a heterogeneous compacted powder part.",
keywords = "Anisotropy, Cohesive particle contact, Elasticity, Multi-particle finite element method, Powder compaction, Yield surface",
author = "Peter Loidolt and Ulz, {Manfred Hannes} and Johannes Khinast",
year = "2019",
doi = "10.1016/j.powtec.2019.01.048",
language = "English",
volume = "345",
pages = "589--600",
journal = "Powder Technology",
issn = "0032-5910",
publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Prediction of the anisotropic mechanical properties of compacted powders

AU - Loidolt, Peter

AU - Ulz, Manfred Hannes

AU - Khinast, Johannes

PY - 2019

Y1 - 2019

N2 - The multi-particle finite element method (MPFEM) was used to test the anisotropic elastic and plastic properties of compacted powders with cohesive contacts. A representative volume element (RVE) of monodisperse, spherical, deformable particles was used to investigate the powder properties after compaction. Efficient periodic boundary conditions and an RVE of only 50 particles allowed extensive parameter studies. During parameter studies the relative density after compaction, the contact cohesion strength and the strain path during compaction were varied. The strain paths were characterized by the ratios of the applied principal strains during compaction that results in different Dirichlet boundary conditions on the RVE. Seven different strain paths were considered including the practically important isostatic and closed die compaction. The outcome of the parameter study were the elastic constants of an orthotropic material model, the uniaxial yield strength for tension and compression, and the yield surfaces for general load cases. No anisotropy was observed for isostatic compaction but increasing anisotropy was observed with increasing ratio of the principal strains during compaction. Regression curves were generated to describe the mechanical properties as a function of the model parameters. In this way, continuous functions were obtained which were capable to describe the distribution of the mechanical material properties in a FEM model of a heterogeneous compacted powder part.

AB - The multi-particle finite element method (MPFEM) was used to test the anisotropic elastic and plastic properties of compacted powders with cohesive contacts. A representative volume element (RVE) of monodisperse, spherical, deformable particles was used to investigate the powder properties after compaction. Efficient periodic boundary conditions and an RVE of only 50 particles allowed extensive parameter studies. During parameter studies the relative density after compaction, the contact cohesion strength and the strain path during compaction were varied. The strain paths were characterized by the ratios of the applied principal strains during compaction that results in different Dirichlet boundary conditions on the RVE. Seven different strain paths were considered including the practically important isostatic and closed die compaction. The outcome of the parameter study were the elastic constants of an orthotropic material model, the uniaxial yield strength for tension and compression, and the yield surfaces for general load cases. No anisotropy was observed for isostatic compaction but increasing anisotropy was observed with increasing ratio of the principal strains during compaction. Regression curves were generated to describe the mechanical properties as a function of the model parameters. In this way, continuous functions were obtained which were capable to describe the distribution of the mechanical material properties in a FEM model of a heterogeneous compacted powder part.

KW - Anisotropy

KW - Cohesive particle contact

KW - Elasticity

KW - Multi-particle finite element method

KW - Powder compaction

KW - Yield surface

UR - http://www.scopus.com/inward/record.url?scp=85060689683&partnerID=8YFLogxK

U2 - 10.1016/j.powtec.2019.01.048

DO - 10.1016/j.powtec.2019.01.048

M3 - Article

VL - 345

SP - 589

EP - 600

JO - Powder Technology

JF - Powder Technology

SN - 0032-5910

ER -