Porous lyocell powders as sound absorbers

Marco Beaumont*, Blasius Buchegger, Sven F. Plappert, Jean Marie Nedelec, Martina Opietnik, Antje Potthast, Thomas Rosenau

*Corresponding author for this work

Research output: Contribution to journalArticle

Abstract

Abstract: Environmentally friendly insulation materials based on renewable resources come more and more to the fore, replacing less sustainable materials, such as mineral wool or polystyrene foams. In this study, we present a straight-forward avenue to a highly porous cellulose II powder for application as sound absorber. The material was prepared from a lyocell-derived cellulose II gel by a freeze-drying approach. The powder has a porosity of 98% and a specific surface area of 177 m2/g. It featured a sound absorption maximum in the frequency range of one-third-octave bands of 400–800 Hz (65 mm thickness) and was significantly more efficient as acoustic insulation material than commercial alternatives. The high performance makes the cellulose II sound absorber especially attractive for a use in loudspeakers for small electronics. Graphical Abstract: [Figure not available: see fulltext.].

Original languageEnglish
JournalCellulose
Early online date24 Nov 2018
DOIs
Publication statusE-pub ahead of print - 24 Nov 2018

Keywords

  • Acoustic absorption
  • Cellulose
  • Freeze-drying
  • Insulation material
  • Lyocell gel
  • Sound absorber

ASJC Scopus subject areas

  • Polymers and Plastics

Fingerprint Dive into the research topics of 'Porous lyocell powders as sound absorbers'. Together they form a unique fingerprint.

Cite this