Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier

Alexander Kreis; Mario Hirz; Severin Stadler

doi:10.1109/IEA.2018.8387093

Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier

Alexander Kreis, Mario Hirz, Severin Stadler

Institute of Automotive Engineering (3310)

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Abstract

In recent years it has become more and more important in the automotive industry to find new ways to reduce the time required in developing a new vehicle. This reduction in development time can be ascertained through the introduction of new systems and strategies. One such example was the introduction of different CAx-systems and tools during past decades. However, there are still a number of issues that could be optimized or enhanced. For example; the data exchange process between different CAx-systems, especially in regards to design, analyses and manufacturing. This paper focuses on a proposed optimization approach of data exchange processes between CAD and CAM, in an attempt to further reduce the effort of data management and costs. However, the process presented in this paper is not only applicable to the automotive industry but can also be used in other industries, e.g. aircraft industry or general mechanical engineering.

Translated title of the contribution	Optimierter Informationsaustauschprozess zwischen CAD und CAM: Verbesserter Datenaustauch im Bereich der Verbindungstechnik aus der Sicht eines Automobilzulieferers
Original language	English
Title of host publication	2018 5th International Conference on Industrial Engineering and Applications (ICIEA)
Publisher	IEEE Xplore
Pages	184-188
Number of pages	5
ISBN (Electronic)	978-1-5386-5748-5
ISBN (Print)	978-1-5386-5747-8
DOIs	https://doi.org/10.1109/IEA.2018.8387093
Publication status	E-pub ahead of print - 19 Jun 2018
Event	2018 5th International Conference on Industrial Engineering and Applications (ICIEA) - National University of Singapore, Singapore, Singapore Duration: 26 Apr 2018 → 28 Apr 2018

Conference

Conference	2018 5th International Conference on Industrial Engineering and Applications (ICIEA)
Abbreviated title	ICIEA 2018
Country/Territory	Singapore
City	Singapore
Period	26/04/18 → 28/04/18

Keywords

data exchange
joining technology
design integration
manufacturing systems
process optimization
analysis
simulation

Fields of Expertise

Mobility & Production

Access to Document

10.1109/IEA.2018.8387093

Cite this

Kreis, A., Hirz, M., & Stadler, S. (2018). Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier. In 2018 5th International Conference on Industrial Engineering and Applications (ICIEA) (pp. 184-188). IEEE Xplore. Advance online publication. https://doi.org/10.1109/IEA.2018.8387093

Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier. / Kreis, Alexander ; Hirz, Mario ; Stadler, Severin.
2018 5th International Conference on Industrial Engineering and Applications (ICIEA). IEEE Xplore, 2018. p. 184-188.

Research output: Chapter in Book/Report/Conference proceeding › Conference paper

Kreis, A , Hirz, M & Stadler, S 2018, Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier. in 2018 5th International Conference on Industrial Engineering and Applications (ICIEA). IEEE Xplore, pp. 184-188, 2018 5th International Conference on Industrial Engineering and Applications (ICIEA) , Singapore, Singapore, 26/04/18. https://doi.org/10.1109/IEA.2018.8387093

@inproceedings{f406638f795f45f2a8776e1b78367373,

title = "Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier",

abstract = "In recent years it has become more and more important in the automotive industry to find new ways to reduce the time required in developing a new vehicle. This reduction in development time can be ascertained through the introduction of new systems and strategies. One such example was the introduction of different CAx-systems and tools during past decades. However, there are still a number of issues that could be optimized or enhanced. For example; the data exchange process between different CAx-systems, especially in regards to design, analyses and manufacturing. This paper focuses on a proposed optimization approach of data exchange processes between CAD and CAM, in an attempt to further reduce the effort of data management and costs. However, the process presented in this paper is not only applicable to the automotive industry but can also be used in other industries, e.g. aircraft industry or general mechanical engineering.",

keywords = "data exchange, joining technology, design integration, manufacturing systems, process optimization, analysis , simulation ",

author = "Alexander Kreis and Mario Hirz and Severin Stadler",

year = "2018",

month = jun,

day = "19",

doi = "10.1109/IEA.2018.8387093",

language = "English",

isbn = "978-1-5386-5747-8 ",

pages = "184--188",

booktitle = "2018 5th International Conference on Industrial Engineering and Applications (ICIEA)",

publisher = "IEEE Xplore",

note = "2018 5th International Conference on Industrial Engineering and Applications (ICIEA) , ICIEA 2018 ; Conference date: 26-04-2018 Through 28-04-2018",

}

TY - GEN

T1 - Optimized Information Exchange Process between CAD and CAM

T2 - 2018 5th International Conference on Industrial Engineering and Applications (ICIEA)

AU - Kreis, Alexander

AU - Hirz, Mario

AU - Stadler, Severin

PY - 2018/6/19

Y1 - 2018/6/19

N2 - In recent years it has become more and more important in the automotive industry to find new ways to reduce the time required in developing a new vehicle. This reduction in development time can be ascertained through the introduction of new systems and strategies. One such example was the introduction of different CAx-systems and tools during past decades. However, there are still a number of issues that could be optimized or enhanced. For example; the data exchange process between different CAx-systems, especially in regards to design, analyses and manufacturing. This paper focuses on a proposed optimization approach of data exchange processes between CAD and CAM, in an attempt to further reduce the effort of data management and costs. However, the process presented in this paper is not only applicable to the automotive industry but can also be used in other industries, e.g. aircraft industry or general mechanical engineering.

AB - In recent years it has become more and more important in the automotive industry to find new ways to reduce the time required in developing a new vehicle. This reduction in development time can be ascertained through the introduction of new systems and strategies. One such example was the introduction of different CAx-systems and tools during past decades. However, there are still a number of issues that could be optimized or enhanced. For example; the data exchange process between different CAx-systems, especially in regards to design, analyses and manufacturing. This paper focuses on a proposed optimization approach of data exchange processes between CAD and CAM, in an attempt to further reduce the effort of data management and costs. However, the process presented in this paper is not only applicable to the automotive industry but can also be used in other industries, e.g. aircraft industry or general mechanical engineering.

KW - data exchange

KW - joining technology

KW - design integration

KW - manufacturing systems

KW - process optimization

KW - analysis

KW - simulation

U2 - 10.1109/IEA.2018.8387093

DO - 10.1109/IEA.2018.8387093

M3 - Conference paper

SN - 978-1-5386-5747-8

SP - 184

EP - 188

BT - 2018 5th International Conference on Industrial Engineering and Applications (ICIEA)

PB - IEEE Xplore

Y2 - 26 April 2018 through 28 April 2018

ER -

Optimized Information Exchange Process between CAD and CAM: Enhanced Data Exchange in the Field of Joining Technology from the Viewpoint of an Automotive Supplier

Abstract

Conference

Keywords

Fields of Expertise

Access to Document

Fingerprint

Cite this