On the choice of closure complexity in anisotropic drag closures for filtered Two Fluid Models

Jan Hendrik Cloete, Schalk Cloete, Stefan Radl, Shahriar Amini

Research output: Contribution to journalArticleResearchpeer-review

Abstract

Filtered Two Fluid Models (fTFMs) aim to enable accurate industrial-scale simulations of fluidized beds by means of closures accounting for the effects of bubbles and clusters. The present study aims to improve anisotropic closures for the drift velocity, which is the primary sub-grid effect altering the filtered drag force, by deriving increasingly complex closures by considering additional independent variables (markers). Three different anisotropic closures, as well as an isotropic closure, are evaluated. A priori tests revealed a significant increase in the predictive capability of the closures as the complexity, in terms of the number of markers considered, increases. However, this improvement is relatively small when compared to the effect of considering anisotropy. Next, a posteriori tests were completed by comparing coarse-grid simulations of bubbling, turbulent and core-annular fluidization against benchmark resolved TFM simulations. This analysis shows good performance of all anisotropic closures, with negligible to minor effects of increasing the drag closure’s complexity by considering additional markers. On the other hand, the isotropic closure lacks generality and shows poor grid independence behaviour. It is therefore concluded that it is essential to include important physical effects, such as anisotropy, in fTFM closures, while complexity in terms of the number of markers considered is of lesser importance.
Original languageEnglish
JournalChemical Engineering Science
DOIs
Publication statusPublished - 8 Jun 2019

Fingerprint

Drag
Anisotropy
Fluids
Fluidization
Fluidized beds

Keywords

  • Fluidized bed
  • Computational Fluid Dynamics
  • Filtered Two Fluid Model
  • Coarse-grid simulations
  • drag

Fields of Expertise

  • Mobility & Production
  • Information, Communication & Computing

Cite this

On the choice of closure complexity in anisotropic drag closures for filtered Two Fluid Models. / Cloete, Jan Hendrik ; Cloete, Schalk; Radl, Stefan; Amini, Shahriar.

In: Chemical Engineering Science, 08.06.2019.

Research output: Contribution to journalArticleResearchpeer-review

@article{c46042f718a64761bd7bfb83908854be,
title = "On the choice of closure complexity in anisotropic drag closures for filtered Two Fluid Models",
abstract = "Filtered Two Fluid Models (fTFMs) aim to enable accurate industrial-scale simulations of fluidized beds by means of closures accounting for the effects of bubbles and clusters. The present study aims to improve anisotropic closures for the drift velocity, which is the primary sub-grid effect altering the filtered drag force, by deriving increasingly complex closures by considering additional independent variables (markers). Three different anisotropic closures, as well as an isotropic closure, are evaluated. A priori tests revealed a significant increase in the predictive capability of the closures as the complexity, in terms of the number of markers considered, increases. However, this improvement is relatively small when compared to the effect of considering anisotropy. Next, a posteriori tests were completed by comparing coarse-grid simulations of bubbling, turbulent and core-annular fluidization against benchmark resolved TFM simulations. This analysis shows good performance of all anisotropic closures, with negligible to minor effects of increasing the drag closure’s complexity by considering additional markers. On the other hand, the isotropic closure lacks generality and shows poor grid independence behaviour. It is therefore concluded that it is essential to include important physical effects, such as anisotropy, in fTFM closures, while complexity in terms of the number of markers considered is of lesser importance.",
keywords = "Fluidized bed, Computational Fluid Dynamics, Filtered Two Fluid Model, Coarse-grid simulations, drag",
author = "Cloete, {Jan Hendrik} and Schalk Cloete and Stefan Radl and Shahriar Amini",
year = "2019",
month = "6",
day = "8",
doi = "10.1016/j.ces.2019.06.006",
language = "English",
journal = "Chemical Engineering Science",
issn = "0009-2509",
publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - On the choice of closure complexity in anisotropic drag closures for filtered Two Fluid Models

AU - Cloete, Jan Hendrik

AU - Cloete, Schalk

AU - Radl, Stefan

AU - Amini, Shahriar

PY - 2019/6/8

Y1 - 2019/6/8

N2 - Filtered Two Fluid Models (fTFMs) aim to enable accurate industrial-scale simulations of fluidized beds by means of closures accounting for the effects of bubbles and clusters. The present study aims to improve anisotropic closures for the drift velocity, which is the primary sub-grid effect altering the filtered drag force, by deriving increasingly complex closures by considering additional independent variables (markers). Three different anisotropic closures, as well as an isotropic closure, are evaluated. A priori tests revealed a significant increase in the predictive capability of the closures as the complexity, in terms of the number of markers considered, increases. However, this improvement is relatively small when compared to the effect of considering anisotropy. Next, a posteriori tests were completed by comparing coarse-grid simulations of bubbling, turbulent and core-annular fluidization against benchmark resolved TFM simulations. This analysis shows good performance of all anisotropic closures, with negligible to minor effects of increasing the drag closure’s complexity by considering additional markers. On the other hand, the isotropic closure lacks generality and shows poor grid independence behaviour. It is therefore concluded that it is essential to include important physical effects, such as anisotropy, in fTFM closures, while complexity in terms of the number of markers considered is of lesser importance.

AB - Filtered Two Fluid Models (fTFMs) aim to enable accurate industrial-scale simulations of fluidized beds by means of closures accounting for the effects of bubbles and clusters. The present study aims to improve anisotropic closures for the drift velocity, which is the primary sub-grid effect altering the filtered drag force, by deriving increasingly complex closures by considering additional independent variables (markers). Three different anisotropic closures, as well as an isotropic closure, are evaluated. A priori tests revealed a significant increase in the predictive capability of the closures as the complexity, in terms of the number of markers considered, increases. However, this improvement is relatively small when compared to the effect of considering anisotropy. Next, a posteriori tests were completed by comparing coarse-grid simulations of bubbling, turbulent and core-annular fluidization against benchmark resolved TFM simulations. This analysis shows good performance of all anisotropic closures, with negligible to minor effects of increasing the drag closure’s complexity by considering additional markers. On the other hand, the isotropic closure lacks generality and shows poor grid independence behaviour. It is therefore concluded that it is essential to include important physical effects, such as anisotropy, in fTFM closures, while complexity in terms of the number of markers considered is of lesser importance.

KW - Fluidized bed

KW - Computational Fluid Dynamics

KW - Filtered Two Fluid Model

KW - Coarse-grid simulations

KW - drag

U2 - 10.1016/j.ces.2019.06.006

DO - 10.1016/j.ces.2019.06.006

M3 - Article

JO - Chemical Engineering Science

JF - Chemical Engineering Science

SN - 0009-2509

ER -