Modeling injection of electrical fast transients into power and IO pins of ICs

Ji Zhang, Jayong Koo, Richard Moseley, Scott Herrin, Xiang Li, David Pommerenke, Daryl G. Beetner

Research output: Contribution to journalArticle

Abstract

A SPICE-based model of a microcontroller was developed to investigate its immunity to electrical fast transients (EFTs). The model includes representations of the on-die power delivery network, the ESD protection clamps, and the I/O driver circuits. Several measurement approaches were developed to characterize the linear and nonlinear components within the model. EFTs were injected into pins of the microcontroller to verify the accuracy of the proposed model. General purpose I/O were tested in several configurations (i.e., pull-up-enabled input, logical-high output, and logical-low output). The model was able to predict the voltage waveform and maximum voltage at each pin within 5∼6% of the measured values. A parasitic bipolar junction transistor associated with the output driver was found to have a critical impact on the noise coupled to the power bus. The simplicity and accuracy of this model shows its promise for understanding and predicting immunity issues in integrated circuits.

Original languageEnglish
Article number6863668
Pages (from-to)1576-1584
Number of pages9
JournalIEEE Transactions on Electromagnetic Compatibility
Volume56
Issue number6
DOIs
Publication statusPublished - 1 Dec 2014
Externally publishedYes

Keywords

  • Electromagnetic interference
  • integrated circuit (IC) design
  • measurement
  • modeling
  • power distribution

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Modeling injection of electrical fast transients into power and IO pins of ICs'. Together they form a unique fingerprint.

  • Cite this