Mixing of commercially available 3D printing filaments for novel RF components

Jan Köhler; Wolfgang Bösch; Erich Leitgeb; Reinhard Teschl; David Johannes Pommerenke

Mixing of commercially available 3D printing filaments for novel RF components

Jan Köhler, Wolfgang Bösch^*, Erich Leitgeb^*, Reinhard Teschl^*, David Johannes Pommerenke^*

^*Corresponding author for this work

Research output: Contribution to conference › Paper › peer-review

Abstract

In this paper a new FDM manufacturing process ispresented, mixing different commercially available filaments tonew composites. Polylactide (PLA) provides the basis as a carriermedium, which has been modified dust by copper, graphite, tita-nium oxide or iron. Thanks to a special manufacturing principle,these materials can be mixed together in any ratio to form anew type of composite. This makes it possible to create novelRF components. This paper discusses the principle of the man-ufacturing process, produces different composites with differentmixing ratios, further processes these composites and determinesthe high-frequency properties in the Ku-band. An evaluation ofthe measurement results was carried out and the applicabilityof this method was checked. The evaluation showed a very goodcorrespondence of this procedure and its applicability.

Translated title of the contribution	Mischung von kommerziell verfügbaren Filamenten für 3D-Druck für neuartige RF-Komponente
Original language	English
Pages	1-6
Number of pages	6
Publication status	Accepted/In press - 24 Jul 2020
Event	28 th International Conference on Software, Telecommunications and Computer Networks - Virtuell, Croatia Duration: 17 Sept 2020 → 19 Sept 2020 http://softcom2020.fesb.unist.hr/softcom2020/

Conference

Conference	28 th International Conference on Software, Telecommunications and Computer Networks
Abbreviated title	SoftCOM 2020
Country/Territory	Croatia
City	Virtuell
Period	17/09/20 → 19/09/20
Internet address	http://softcom2020.fesb.unist.hr/softcom2020/

Cite this

@conference{8f108562df714b789294b2cc866fd5e7,

title = "Mixing of commercially available 3D printing filaments for novel RF components",

abstract = "In this paper a new FDM manufacturing process ispresented, mixing different commercially available filaments tonew composites. Polylactide (PLA) provides the basis as a carriermedium, which has been modified dust by copper, graphite, tita-nium oxide or iron. Thanks to a special manufacturing principle,these materials can be mixed together in any ratio to form anew type of composite. This makes it possible to create novelRF components. This paper discusses the principle of the man-ufacturing process, produces different composites with differentmixing ratios, further processes these composites and determinesthe high-frequency properties in the Ku-band. An evaluation ofthe measurement results was carried out and the applicabilityof this method was checked. The evaluation showed a very goodcorrespondence of this procedure and its applicability.",

author = "Jan K{\"o}hler and Wolfgang B{\"o}sch and Erich Leitgeb and Reinhard Teschl and Pommerenke, {David Johannes}",

year = "2020",

month = jul,

day = "24",

language = "English",

pages = "1--6",

note = "28 th International Conference on Software, Telecommunications and Computer Networks, SoftCOM 2020 ; Conference date: 17-09-2020 Through 19-09-2020",

url = "http://softcom2020.fesb.unist.hr/softcom2020/",

}

TY - CONF

T1 - Mixing of commercially available 3D printing filaments for novel RF components

AU - Köhler, Jan

AU - Bösch, Wolfgang

AU - Leitgeb, Erich

AU - Teschl, Reinhard

AU - Pommerenke, David Johannes

PY - 2020/7/24

Y1 - 2020/7/24

N2 - In this paper a new FDM manufacturing process ispresented, mixing different commercially available filaments tonew composites. Polylactide (PLA) provides the basis as a carriermedium, which has been modified dust by copper, graphite, tita-nium oxide or iron. Thanks to a special manufacturing principle,these materials can be mixed together in any ratio to form anew type of composite. This makes it possible to create novelRF components. This paper discusses the principle of the man-ufacturing process, produces different composites with differentmixing ratios, further processes these composites and determinesthe high-frequency properties in the Ku-band. An evaluation ofthe measurement results was carried out and the applicabilityof this method was checked. The evaluation showed a very goodcorrespondence of this procedure and its applicability.

AB - In this paper a new FDM manufacturing process ispresented, mixing different commercially available filaments tonew composites. Polylactide (PLA) provides the basis as a carriermedium, which has been modified dust by copper, graphite, tita-nium oxide or iron. Thanks to a special manufacturing principle,these materials can be mixed together in any ratio to form anew type of composite. This makes it possible to create novelRF components. This paper discusses the principle of the man-ufacturing process, produces different composites with differentmixing ratios, further processes these composites and determinesthe high-frequency properties in the Ku-band. An evaluation ofthe measurement results was carried out and the applicabilityof this method was checked. The evaluation showed a very goodcorrespondence of this procedure and its applicability.

M3 - Paper

SP - 1

EP - 6

T2 - 28 th International Conference on Software, Telecommunications and Computer Networks

Y2 - 17 September 2020 through 19 September 2020

ER -