Local gas holdup simulation and validation of industrial-scale aerated bioreactors

Christian Witz, Daniel Franz Treffer, Timo Hardiman, Johannes Khinast

Research output: Contribution to journalArticleResearchpeer-review

Abstract

To date, the efficiency of industrial-size bioreactors has mainly been improved based on empirical knowledge. Computer simulation may help to understand the processes that occur inside the reactor and to develop new reactor designs. Euler-Lagrange simulations of the two-phase flow in large bioreactors, which could not be performed within a timeframe suitable for engineering purposes due to the limited computation resources, were made possible by the calculation power of graphic cards. The lattice Boltzmann method is well suited for parallelization which makes it ideal for calculating the fluid field inside a reactor driven by multiple Rushton turbines on graphic processing units. The bubble movements were captured via a Lagrangian approach by solving the Newton's equations of motion. A two-way coupling between the disperse and continuous phases was applied. Break up and coalescence of the bubbles were modeled via stochastic algorithms using the approach rate of small turbulent eddies and the comparison of the contact time and film breakage time, respectively. To gather experimental data, a conductivity sensor was used to measure the local gas holdup. The rate and the duration of current drops were recorded to estimate the bubble size and the void fraction around the sensor's tip position. The sensor was used in a 150l custom-built acrylic reactor. Several flow regimes with varying gas flow rates and stirrer speeds were investigated. The experimental results were in good agreement with the simulation data, especially at low stirring and low aeration rates. To prove the applicability of the code to large-scale problems, a 40 m3 reactor was simulated.

Original languageEnglish
Pages (from-to)636-648
Number of pages13
JournalChemical Engineering Science
Volume152
DOIs
Publication statusPublished - 2 Oct 2016

Fingerprint

Bioreactor
Bioreactors
Reactor
Gases
Bubble
Sensors
Simulation
Void fraction
Sensor
Bubbles (in fluids)
Coalescence
Two phase flow
Acrylics
Equations of motion
Flow of gases
Turbines
Void Fraction
Flow rate
Breakage
Stochastic Algorithms

Keywords

  • Bioreactor
  • CFD
  • Gas holdup
  • GPU
  • Lagrangian bubble tracking
  • Lattice Boltzmann method

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Industrial and Manufacturing Engineering
  • Applied Mathematics

Cite this

Local gas holdup simulation and validation of industrial-scale aerated bioreactors. / Witz, Christian; Treffer, Daniel Franz; Hardiman, Timo; Khinast, Johannes.

In: Chemical Engineering Science, Vol. 152, 02.10.2016, p. 636-648.

Research output: Contribution to journalArticleResearchpeer-review

@article{562acb3dc63a44558090df010944fa84,
title = "Local gas holdup simulation and validation of industrial-scale aerated bioreactors",
abstract = "To date, the efficiency of industrial-size bioreactors has mainly been improved based on empirical knowledge. Computer simulation may help to understand the processes that occur inside the reactor and to develop new reactor designs. Euler-Lagrange simulations of the two-phase flow in large bioreactors, which could not be performed within a timeframe suitable for engineering purposes due to the limited computation resources, were made possible by the calculation power of graphic cards. The lattice Boltzmann method is well suited for parallelization which makes it ideal for calculating the fluid field inside a reactor driven by multiple Rushton turbines on graphic processing units. The bubble movements were captured via a Lagrangian approach by solving the Newton's equations of motion. A two-way coupling between the disperse and continuous phases was applied. Break up and coalescence of the bubbles were modeled via stochastic algorithms using the approach rate of small turbulent eddies and the comparison of the contact time and film breakage time, respectively. To gather experimental data, a conductivity sensor was used to measure the local gas holdup. The rate and the duration of current drops were recorded to estimate the bubble size and the void fraction around the sensor's tip position. The sensor was used in a 150l custom-built acrylic reactor. Several flow regimes with varying gas flow rates and stirrer speeds were investigated. The experimental results were in good agreement with the simulation data, especially at low stirring and low aeration rates. To prove the applicability of the code to large-scale problems, a 40 m3 reactor was simulated.",
keywords = "Bioreactor, CFD, Gas holdup, GPU, Lagrangian bubble tracking, Lattice Boltzmann method",
author = "Christian Witz and Treffer, {Daniel Franz} and Timo Hardiman and Johannes Khinast",
year = "2016",
month = "10",
day = "2",
doi = "10.1016/j.ces.2016.06.053",
language = "English",
volume = "152",
pages = "636--648",
journal = "Chemical Engineering Science",
issn = "0009-2509",
publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Local gas holdup simulation and validation of industrial-scale aerated bioreactors

AU - Witz, Christian

AU - Treffer, Daniel Franz

AU - Hardiman, Timo

AU - Khinast, Johannes

PY - 2016/10/2

Y1 - 2016/10/2

N2 - To date, the efficiency of industrial-size bioreactors has mainly been improved based on empirical knowledge. Computer simulation may help to understand the processes that occur inside the reactor and to develop new reactor designs. Euler-Lagrange simulations of the two-phase flow in large bioreactors, which could not be performed within a timeframe suitable for engineering purposes due to the limited computation resources, were made possible by the calculation power of graphic cards. The lattice Boltzmann method is well suited for parallelization which makes it ideal for calculating the fluid field inside a reactor driven by multiple Rushton turbines on graphic processing units. The bubble movements were captured via a Lagrangian approach by solving the Newton's equations of motion. A two-way coupling between the disperse and continuous phases was applied. Break up and coalescence of the bubbles were modeled via stochastic algorithms using the approach rate of small turbulent eddies and the comparison of the contact time and film breakage time, respectively. To gather experimental data, a conductivity sensor was used to measure the local gas holdup. The rate and the duration of current drops were recorded to estimate the bubble size and the void fraction around the sensor's tip position. The sensor was used in a 150l custom-built acrylic reactor. Several flow regimes with varying gas flow rates and stirrer speeds were investigated. The experimental results were in good agreement with the simulation data, especially at low stirring and low aeration rates. To prove the applicability of the code to large-scale problems, a 40 m3 reactor was simulated.

AB - To date, the efficiency of industrial-size bioreactors has mainly been improved based on empirical knowledge. Computer simulation may help to understand the processes that occur inside the reactor and to develop new reactor designs. Euler-Lagrange simulations of the two-phase flow in large bioreactors, which could not be performed within a timeframe suitable for engineering purposes due to the limited computation resources, were made possible by the calculation power of graphic cards. The lattice Boltzmann method is well suited for parallelization which makes it ideal for calculating the fluid field inside a reactor driven by multiple Rushton turbines on graphic processing units. The bubble movements were captured via a Lagrangian approach by solving the Newton's equations of motion. A two-way coupling between the disperse and continuous phases was applied. Break up and coalescence of the bubbles were modeled via stochastic algorithms using the approach rate of small turbulent eddies and the comparison of the contact time and film breakage time, respectively. To gather experimental data, a conductivity sensor was used to measure the local gas holdup. The rate and the duration of current drops were recorded to estimate the bubble size and the void fraction around the sensor's tip position. The sensor was used in a 150l custom-built acrylic reactor. Several flow regimes with varying gas flow rates and stirrer speeds were investigated. The experimental results were in good agreement with the simulation data, especially at low stirring and low aeration rates. To prove the applicability of the code to large-scale problems, a 40 m3 reactor was simulated.

KW - Bioreactor

KW - CFD

KW - Gas holdup

KW - GPU

KW - Lagrangian bubble tracking

KW - Lattice Boltzmann method

UR - http://www.scopus.com/inward/record.url?scp=84978531967&partnerID=8YFLogxK

U2 - 10.1016/j.ces.2016.06.053

DO - 10.1016/j.ces.2016.06.053

M3 - Article

VL - 152

SP - 636

EP - 648

JO - Chemical Engineering Science

JF - Chemical Engineering Science

SN - 0009-2509

ER -