Integrated design of a compact Ka-band one-port vector reflectometer

M. Fallahpour*, M. Baumgartner, M. T. Ghasr, R. Zoughi, D. Pommerenke

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, an integrated design of a compact one-port vector millimeter wave reflectometer or network analyzer (VNA), operating in the Ka-band (26.5-40 GHz) frequency range is presented. The design follows that of a recently-developed VNA, but with the goal of incorporating its critical components into one integrated system so as to make it smaller, improve its measurement accuracy and source stability, while incorporating on-board control and data collection approach. The most critical high-frequency component of this design is an electronically-controlled phase shifter, designed using sub-resonant PIN diode-loaded slots incorporated in the broad wall of a rectangular waveguide. Using a non-uniform spacing scheme used in the placement of the slots is shown to significantly reduce unwanted resonances. In addition, slot-coupled rectangular waveguide-tee configuration is used for the standing-wave probe section of this reflectometer which is incorporated into the phase shifter on the same high-frequency printed circuit board (PCB). Finally, this new design provides the possibility of using a more accurate three-port S-parameters characterization instead of a two-port characterization. The design foundation and some results of extensive simulations are shown in this paper.

Original languageEnglish
Title of host publication2011 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2011 - Proceedings
Pages154-158
Number of pages5
DOIs
Publication statusPublished - 25 Aug 2011
Externally publishedYes
Event2011 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2011 - Binjiang, Hangzhou, China
Duration: 10 May 201112 May 2011

Publication series

NameConference Record - IEEE Instrumentation and Measurement Technology Conference
ISSN (Print)1091-5281

Conference

Conference2011 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2011
CountryChina
CityBinjiang, Hangzhou
Period10/05/1112/05/11

Keywords

  • phase shifter
  • standing-wave probe
  • sub-resonant slots
  • vector netwrok analyzer

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Integrated design of a compact Ka-band one-port vector reflectometer'. Together they form a unique fingerprint.

  • Cite this

    Fallahpour, M., Baumgartner, M., Ghasr, M. T., Zoughi, R., & Pommerenke, D. (2011). Integrated design of a compact Ka-band one-port vector reflectometer. In 2011 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2011 - Proceedings (pp. 154-158). [5944200] (Conference Record - IEEE Instrumentation and Measurement Technology Conference). https://doi.org/10.1109/IMTC.2011.5944200