Identification of Soil Strata from In-Situ Test Data Using Machine Learning

Stefan Rauter*, Franz Tschuchnigg

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference paperpeer-review

Abstract

An increasing number of geotechnical analyses such as settlement and stability calculations are performed using 2D or 3D models. In order to obtain a representation of the soil conditions that is as close to reality as possible, subsurface investigations such as core drillings or soundings are necessary. Based on the findings of these investigation campaigns, similar soils are grouped into layers and subsequently ground models are defined, which serve as the basis for conventional analysis or numerical investigations. In recent years, the Cone Penetration Test (CPT) has established itself as a sound alternative to costly and time-consuming core drillings. However, when using CPT, the subsoil is not visible to the engineer, making the interpretation of CPT data difficult. For the classification of soils into groups with similar properties, various soil behavior type charts based on the CPT data were published. Additionally, data science tools such as machine learning are increasingly being used to interpret CPT data. However, regardless of the interpretation method used, defining the layer boundaries and combining them into a three-dimensional model is usually done manually, thus it is still based on experience. The present work aims to provide an automatic identification of soil layers from CPT data using a combination of machine learning models. The presented approach was also tested using CPT data from a benchmark site in Austria and showed very good agreement with results of traditional (experience based) interpretation of soil investigations.
Original languageEnglish
Title of host publicationChallenges and Innovations in Geomechanics - Proceedings of the 16th International Conference of IACMAG - Volume 3
EditorsMarco Barla, Alessandra Insana, Alice Di Donna, Donatella Sterpi
Place of PublicationCham
PublisherSpringer
Pages37-44
Number of pages8
Volume3
ISBN (Electronic)978-3-031-12851-6
ISBN (Print)978-3-031-12850-9
DOIs
Publication statusPublished - 2023
Event16th International Conference on Computer Methods and Advances in Geomechanics: IACMAG 2022 - Hybrider Event, Torino, Italy
Duration: 30 Aug 20222 Sept 2022
https://iacmag2022.org/

Publication series

NameLecture Notes in Civil Engineering
Volume288 LNCE
ISSN (Print)2366-2557
ISSN (Electronic)2366-2565

Conference

Conference16th International Conference on Computer Methods and Advances in Geomechanics
Country/TerritoryItaly
CityHybrider Event, Torino
Period30/08/222/09/22
Internet address

Keywords

  • Cone penetration test
  • Kernel density estimation
  • Machine learning
  • Random forest

ASJC Scopus subject areas

  • Civil and Structural Engineering

Fingerprint

Dive into the research topics of 'Identification of Soil Strata from In-Situ Test Data Using Machine Learning'. Together they form a unique fingerprint.

Cite this