Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abstract

In this paper a post-processing framework is presented that can be applied during the design phase of integrated circuits. The aim of this work is to help designers to identify electromagnetic interference issues of their designs, already during the concept or design phase. The developed tool is mainly written in Python and therefore versatilely usable. In general it can be applied to a large range of potential issues, due to e.g. radio frequency interference, ESD (electrostatic discharge), etc., occurring in circuit design. However, this paper focuses on the investigation of changes that are introduced in a current regulator by injecting radio frequency interferences into specific circuit blocks. The main scripts are designed environment independent and can therefore be used for a broad range of simulators.

Original languageEnglish
Title of host publicationSMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings
PublisherInstitute of Electrical and Electronics Engineers
Pages201-204
Number of pages4
ISBN (Electronic)9781728112015
DOIs
Publication statusPublished - 1 Jul 2019
Event16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, SMACD 2019 - Lausanne, Switzerland
Duration: 15 Jul 201918 Jul 2019

Conference

Conference16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, SMACD 2019
CountrySwitzerland
CityLausanne
Period15/07/1918/07/19

Fingerprint

Post-processing
Interference
radio frequency interference
Processing
Python
current regulators
Circuit Design
Integrated Circuits
Regulator
Electrostatics
Range of data
Electrostatic discharge
Radio interference
electromagnetic interference
Networks (circuits)
Simulator
Signal interference
simulators
integrated circuits
Integrated circuits

Keywords

  • DPI
  • EMI analysis
  • operating region transition
  • post-processing framework
  • radio frequency interference

ASJC Scopus subject areas

  • Computer Graphics and Computer-Aided Design
  • Electrical and Electronic Engineering
  • Safety, Risk, Reliability and Quality
  • Modelling and Simulation
  • Instrumentation

Cite this

Zupan, D., & Deutschmann, B. (2019). Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework. In SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings (pp. 201-204). [8795218] Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/SMACD.2019.8795218

Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework. / Zupan, Dominik; Deutschmann, Bernd.

SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings. Institute of Electrical and Electronics Engineers, 2019. p. 201-204 8795218.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Zupan, D & Deutschmann, B 2019, Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework. in SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings., 8795218, Institute of Electrical and Electronics Engineers, pp. 201-204, 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, SMACD 2019, Lausanne, Switzerland, 15/07/19. https://doi.org/10.1109/SMACD.2019.8795218
Zupan D, Deutschmann B. Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework. In SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings. Institute of Electrical and Electronics Engineers. 2019. p. 201-204. 8795218 https://doi.org/10.1109/SMACD.2019.8795218
Zupan, Dominik ; Deutschmann, Bernd. / Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework. SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings. Institute of Electrical and Electronics Engineers, 2019. pp. 201-204
@inproceedings{35711545394947e38920c17295e2fc0b,
title = "Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework",
abstract = "In this paper a post-processing framework is presented that can be applied during the design phase of integrated circuits. The aim of this work is to help designers to identify electromagnetic interference issues of their designs, already during the concept or design phase. The developed tool is mainly written in Python and therefore versatilely usable. In general it can be applied to a large range of potential issues, due to e.g. radio frequency interference, ESD (electrostatic discharge), etc., occurring in circuit design. However, this paper focuses on the investigation of changes that are introduced in a current regulator by injecting radio frequency interferences into specific circuit blocks. The main scripts are designed environment independent and can therefore be used for a broad range of simulators.",
keywords = "DPI, EMI analysis, operating region transition, post-processing framework, radio frequency interference",
author = "Dominik Zupan and Bernd Deutschmann",
year = "2019",
month = "7",
day = "1",
doi = "10.1109/SMACD.2019.8795218",
language = "English",
pages = "201--204",
booktitle = "SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings",
publisher = "Institute of Electrical and Electronics Engineers",
address = "United States",

}

TY - GEN

T1 - Identification of EMI Induced Changes during the Design of ICs using a Post-Processing Framework

AU - Zupan, Dominik

AU - Deutschmann, Bernd

PY - 2019/7/1

Y1 - 2019/7/1

N2 - In this paper a post-processing framework is presented that can be applied during the design phase of integrated circuits. The aim of this work is to help designers to identify electromagnetic interference issues of their designs, already during the concept or design phase. The developed tool is mainly written in Python and therefore versatilely usable. In general it can be applied to a large range of potential issues, due to e.g. radio frequency interference, ESD (electrostatic discharge), etc., occurring in circuit design. However, this paper focuses on the investigation of changes that are introduced in a current regulator by injecting radio frequency interferences into specific circuit blocks. The main scripts are designed environment independent and can therefore be used for a broad range of simulators.

AB - In this paper a post-processing framework is presented that can be applied during the design phase of integrated circuits. The aim of this work is to help designers to identify electromagnetic interference issues of their designs, already during the concept or design phase. The developed tool is mainly written in Python and therefore versatilely usable. In general it can be applied to a large range of potential issues, due to e.g. radio frequency interference, ESD (electrostatic discharge), etc., occurring in circuit design. However, this paper focuses on the investigation of changes that are introduced in a current regulator by injecting radio frequency interferences into specific circuit blocks. The main scripts are designed environment independent and can therefore be used for a broad range of simulators.

KW - DPI

KW - EMI analysis

KW - operating region transition

KW - post-processing framework

KW - radio frequency interference

UR - http://www.scopus.com/inward/record.url?scp=85071543606&partnerID=8YFLogxK

U2 - 10.1109/SMACD.2019.8795218

DO - 10.1109/SMACD.2019.8795218

M3 - Conference contribution

SP - 201

EP - 204

BT - SMACD 2019 - 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design, Proceedings

PB - Institute of Electrical and Electronics Engineers

ER -