High-temperature condensation particle counter using a systematically selected dedicated working fluid for automotive applications

Martin Kupper*, Adam Boies, Martin Kraft, Alexander Bergmann

*Corresponding author for this work

Research output: Contribution to journalArticle

Abstract

A stable high-temperature condensation particle counter (HTCPC), operating above 170 °C was realized. First a dedicated working fluid was identified in a two-stage process, consisting of a pre-selection based on relevant substance properties and a subsequent experimental evaluation. A prototype for experimental evaluation of the concept was designed and built, supported by CFD simulations considering the properties of the working fluid. The surface tension of the working fluid was measured at different temperatures, revealing higher values than predicted and a specific adhesion to graphite. With a especially developed high-temperature optics module, the proof of principle was verified. Calibration measurements have been performed against an automotive grade CPC. The operation in compliance to the legislative requirements for particle number counters was successfully proven.

Original languageEnglish
Pages (from-to)381-395
Number of pages15
JournalAerosol Science and Technology
Volume54
Issue number4
Early online date3 Jan 2020
DOIs
Publication statusPublished - 2 Apr 2020

Keywords

  • Pramod Kulkarni

ASJC Scopus subject areas

  • Pollution
  • Materials Science(all)
  • Environmental Chemistry

Cite this